 | Up a level |
Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641
Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Ammann, Samuel; Schlegel, Sven; Beyer, Mario; Aehlig, Karsten; Lehmann, Martin; Jung, Heiko; Niemz, Peter (2016). Quality assessment of glued ash wood for construction engineering. European Journal of Wood and Wood Products, 74(1), pp. 67-74. Springer 10.1007/s00107-015-0981-2
Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5
Clerc, Gaspard; Brülisauer, Martina; Affolter, Samuel; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2017). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive. International Journal of Adhesion and Adhesives, 72, pp. 130-138. Elsevier 10.1016/j.ijadhadh.2016.09.008
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
Hebel, Dirk E.; Heisel, Felix; Javadian, Alireza; Müller, Philipp; Lee, Simon; Aigner, Nikita; Schlesier, Karsten (2017). Construction with engineered bamboo In: Cultivated building materials: industrialized natural resources for architecture and construction (pp. 32-39). Basel: De Gruyter
Stolz, Martin; Schlüchter, C.; Akçar, N.; Ivy-Ochs, S. (2015). Relevance of Quaternary alpine paleoglaciations for present day geoengineering projects (Unpublished). In: XIX INQUA Congress. Nagoya, Japan. 26.07.-02.08.2015.
Nyffenegger, Franziska; Yavuz, V.; Akçar, N.; Ivy-Ochs, S.; Fredin, O.; Schlunegger, F. (2015). Rearward landsliding in sensitive clays: February 2011 massive failures at the Cöllolar coalfields, eastern Turkey (Unpublished). In: 13th Swiss Geoscience Meeting. Basel. 20.-21.11.2015.
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH
Ammann AG (2004). Connecting element (EP 1 437 040 A1)
Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Ammann, Samuel; Schlegel, Sven; Beyer, Mario; Aehlig, Karsten; Lehmann, Martin; Jung, Heiko; Niemz, Peter (2016). Quality assessment of glued ash wood for construction engineering. European Journal of Wood and Wood Products, 74(1), pp. 67-74. Springer 10.1007/s00107-015-0981-2
Ammann, Samuel; Niemz, Peter (2015). Specific fracture energy at glue joints in European beech wood International Journal of Adhesion and Adhesives, 60, pp. 47-53. Elsevier 10.1016/j.ijadhadh.2015.03.007
Niemz, Peter; Ammann, Samuel D. (2016). Mechanical performance of glue joints in structural hardwood elements In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Müller, Andreas; Amstutz Hugi, Corinne (1 May 2019). Methoden der Zustandserfassung Wir Holzbauer, 4, pp. 30-33.
Müller, Andreas (1 March 2019). Zustandserfassung von Holzkonstruktionen Wir Holzbauer, 3, pp. 30-33.
Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST
Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.
Willmann, Jan; Knauss, Michael; Bonwetsch, Tobias; Apolinarska, Anna Aleksandra; Gramazio, Fabio; Kohler, Matthias (2016). Robotic timber construction : Expanding additive fabrication to new dimensions Automation in construction, 2016(61), pp. 16-23.
Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.
Fitzken Da Vinci M. Niro, J.; Kyriazopoulos, Michail; Bianchi, Sauro; Mayer, Ingo; Eusebio, D.A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2016). Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives. International Wood Products Journal, 7(4), pp. 208-214. Taylor & Francis 10.1080/20426445.2016.1207039
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019
Volkmer, Thomas; Noël, Marion; Arnold, M.; Strautmann, J. (2016). Analysis of lignin degradation on wood surfaces to create a UV-protecting cellulose rich layer. International Wood Products Journal, 7(3), pp. 156-164. Taylor & Francis 10.1080/20426445.2016.1200826
Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034
Güntekin, Ergün; Aydın, Tuğba Yılmaz; Niemz, Peter (2015). Prediction of compression properties in three orthotropic directions for some important Turkish wood species using ultrasound BioResources, 10(4), pp. 7252-7262.
Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346
Bachmann, Eduard (2018). Wenn der Mensch mit dem Roboter… Spirit biel/bienne, pp. 8-9. Berner Fachhochschule BFH Architektur, Holz und Bau/Technik und Informatik
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Bachmann, Eduard; Sigrist, Christophe (2014). Complex timber structures In: Gramazio, F.; Kohler, M.; Willmann, J. (eds.) The robotic touch: how robots change architecture (pp. 364-377). Zürich: Park Books
Zock, P.; Bachmann, Eduard; Sitzmann, S.; Sigrist, Christophe (2014). Neue Verbindung für komplexe, robotergefertigte Holzstrukture In: S-Win Tagung. 46. Fortbildungskurs - Holzverbindungen mit Klebstoffen für die Bauanwendung. Weinfelden, Switzerland. 21.-22.10.2014.
Rehm, Christiane; Bachmann, Eduard; Sitzmann, Stefan (2014). Fensterwerkzeuge – Dünne Schicht, grosse Wirkung In: 16. Holztechnologisches Kolloquium. Dresden, Germany. 03.-04.04.2014.
Bachmann, Eduard (2014). Fensterwerkzeuge - Dünne Schicht - Grosse Wirkung In: Fensterbau/frontale 2014: Innovationen aus der Schweiz. Nürnberg, Germany. 27.03.2014.
Bachmann, Eduard (2014). Auf Messers Schneide: Werkzeuge mit dünnen Schichten In: Fenster-Türen-Treff 2014. Schadmin, Austria. 13.-14.03.2014.
Bachtiar, E. V.; Rüggeberg, M.; Hering, S.; Kaliske, M.; Niemz, Peter (2017). Estimating shear properties of walnut wood: a combined experimental and theoretical approach. Materials and Structures, 50(6), pp. 1-15. Springer 10.1617/s11527-017-1119-2
Jiang, J.; Bachtiar, E. V.; Lu, J.; Niemz, Peter (2017). Moisture-dependent orthotropic elasticity and strength properties of Chinese fir wood European Journal of Wood and Wood Products, 75(6), pp. 927-938. Springer 10.1007/s00107-017-1166-y
Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104
Bachtiar, Erik V.; Sanabria, Segrio J.; Mittig, Johannes P.; Niemz, Peter (2017). Moisture-dependent elastic characteristics of walnut and cherry wood by means of mechanical and ultrasonic test incorporating three different ultrasound data evaluation techniques. Wood Science and Technology, 51(1), pp. 47-67. Springer 10.1007/s00226-016-0851-z
Bachtiar, Erik V.; Clerc, Gaspard; Brunner, Andreas J.; Kaliske, Michael; Niemz, Peter (2017). Static and dynamic tensile shear test of glued lap wooden joint with four different types of adhesives. Holzforschung, 71(5), pp. 391-396. De Gruyter 10.1515/hf-2016-0154
Bachtiar, Erik V.; Rüggeberg, Markus; Niemz, Peter (2017). Mechanical behavior of walnut ( Juglans regia L .) and cherry ( Prunus avium L .) wood in tension and compression in all anatomical directions. Revisiting the tensile / compressive stiffness ratios of wood. Holzforschung, 72(1), pp. 71-80. De Gruyter 10.1515/hf-2017-0053
Konopka, Daniel; Bachtiar, Erik V.; Niemz, Peter; Kaliske, Michael (2017). Experimental and numerical analysis of moisture transport in walnut and cherry wood in radial and tangential material directions. BioResources, 12(4), pp. 8920-8936. North Carolina State University
Murata, Koji; Bachtiar, Erik Valentine; Niemz, Peter (2017). Determination of mode I and mode II fracture toughness of walnut and cherry in TR and RT crack propagation system by the Arcan test. Holzforschung, 71(12), pp. 985-990. De Gruyter 10.1515/hf-2017-0063
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)
Zerbst, David; Baensch, Franziska; Pfriem, Alexander; Niemz, Peter (2016). Visko-elastisches Verhalten von Holz-Klebstoff-Verbindungen unter zyklischer Zug-Druck-Belastung. Bautechnik, 93(11), pp. 795-800. Wiley-Blackwell - STM 10.1002/bate.201500102
Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Brunner, Andreas J.; Baensch, Franziska; Sause, Markus G. R.; Zauner, Michaela; Niemz, Peter (2015). Schallemissionsanalyse und Synchrotron- basierte Mikrotomografie an verklebten Miniatur-Zugprüfkörpern aus Fichtenholz In: 20. Kolloquium Schallenemission. Garmisch-Partenkirchen, Germany. 18.-19.06.2015.
Büttner, Daniel; Stolz, Martin; Balazs, Fonyo (2014). Forschungsprojekt über Geokunststoffe als Schutz der Abdichtung geotchnischer Bauwerke. Strasse und Verkehr, 9, pp. 30-32.
Baraniak, P.; Stolz, Martin; Schoevaerts, B.; Wendeler, C. (May 2016). New results of high-tensile steel meshes tested in first large scale field test application In: 1st Southern African Geotechnical Conference. Sun City / South Africa. 5 - 6 May 2016.
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: 6th Canadian Geohazards Conference. Kingston, Canada. 15.-18.06.2014.
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: Queen’s University, Kingston, ON. Canada. 17 June 2014.
Cala, M.; Stolz, Martin; Baraniak, P.; Rist, Armin; Roduner, A. (2013). Large scale field tests for slope stabilizations made with flexible facings (Unpublished). In: EUROCK 2013 International Symposium on Rock Mechanics for Resources, Energy and Environment. Wroclaw, Polen. 21.-26.09.2013.
Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee
Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press
Nyffenegger, Franziska; Barhoumi, Zohra Mirjam (June 2019). Verträgt sich mit dem Grundwasser – der neue Niederdruckjetting-Pfahl spirit biel/bienne, 2019(2), pp. 26-27. Berner Fachhochschule BFH
Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5
Kolb, Hanspeter; Beetschen, Mirko (2019). Vielfalt im Holzbau Die schönsten Seiten des Kantons Bern: Vol. 26. Bern: Stämpfli Verlag AG
Benthien, Jan T.; Thömen, Heiko (2013). Effects of agglomeration and pressing process on the properties of flat pressed WPC panels Journal of Applied Polymer Science, 129(6), pp. 3710-3717. John Wiley & Sons, Ltd 10.1002/app.39155
Schmidt, Henrik; Benthien, Jan T.; Thömen, Heiko (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels European Journal of Wood and Wood Products, 71(5), pp. 591-597. Springer 10.1007/s00107-013-0719-y
Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Beyer, Mario; Kránitz, Katalin; Bremer, Martina; Peters, Jana; Fischer, Steffen; Bues, Claus-Thomas; Niemz, Peter (2018). Effect of natural aging on the chemical composition of norway spruce, fir, and european oak wood. Pro Ligno, 14(2), pp. 3-19. Fundatia PRO Ligno
Ammann, Samuel; Schlegel, Sven; Beyer, Mario; Aehlig, Karsten; Lehmann, Martin; Jung, Heiko; Niemz, Peter (2016). Quality assessment of glued ash wood for construction engineering. European Journal of Wood and Wood Products, 74(1), pp. 67-74. Springer 10.1007/s00107-015-0981-2
Bianchi, Sauro; Thömen, Heiko; Junginger, S.; Pichelin, Frédéric (2019). Medium density boards made of groundwood fibres: an analysis of their mechanical and physical properties European Journal of Wood and Wood Products, 77(1), pp. 71-77. Springer 10.1007/s00107-018-1367-z
Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832
Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27.
Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105
Garcia, C.M.; San Pablo, M.R.; Bianchi, Sauro; Pichelin, Frédéric (2018). Resistance of fibreboards made of milled coconut husk and bonded with tannin against insects and fungi under Philippine conditions. International Wood Products Journal, 9(3), pp. 99-107. Taylor & Francis 10.1080/20426445.2018.1432169
Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21.
Garcia, Carlos M.; San Pablo, Marciana R.; Bianchi, Sauro; Pichelin, Frédéric (2018). Evaluation of cocoboard resistance against Philippine termites In: 12th Conference of the Pacific Rim Termite Research Group. Yogyakarta, Indonesia. 21.-22.04.2018.
Böger, Thomas; Bianchi, Sauro; Salzer, Corinna; Pichelin, Frédéric (2017). Binderless boards made of milled coconut husk: an analysis of the technical feasibility and process restraints. International Wood Products Journal, 9(1), pp. 3-8. Taylor & Francis 10.1080/20426445.2017.1400756
Ding, T.; Bianchi, Sauro; Ganne-Chédeville, Christelle; Kilpeläinen, P.; Haapala, A.; Räty, T. (2017). Life cycle assessment of tannin extraction from spruce bark. iForest: Biogeosciences and Forestry, 10(5), pp. 807-814. 10.3832/ifor2342-010
Bianchi, Sauro; Kroslakova, Ivana; Mayer, Ingo (2016). Determination of Molecular Structures of Condensed Tannins from Plant Tissues Using HPLC-UV Combined with Thiolysis and MALDI-TOF Mass Spectrometry. BIO-PROTOCOL, 6(20), pp. 1-14. 10.21769/BioProtoc.1975
Fitzken Da Vinci M. Niro, J.; Kyriazopoulos, Michail; Bianchi, Sauro; Mayer, Ingo; Eusebio, D.A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2016). Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives. International Wood Products Journal, 7(4), pp. 208-214. Taylor & Francis 10.1080/20426445.2016.1207039
Bianchi, Sauro; Koch, Gerald; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2016). Hot water extraction of Norway spruce (Picea abies [Karst.]) bark: analyses of the influence of bark aging and process parameters on the extract composition. Holzforschung, 70(7), pp. 619-631. De Gruyter 10.1515/hf-2015-0160
Bianchi, Sauro; Mayer, Ingo; Pichelin, Frédéric (2016). Chemische Eigenschaften von Rindenextrakten heimischer Nadelhölzer und Einsatz daraus hergestellter Klebstoffe Holztechnologie, 57(4), pp. 26-33.
Bianchi, Sauro; Kroslakova, Ivana; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2015). Characterization of condensed tannins and carbohydrates in hot water bark extracts of European softwood species Phytochemistry, 120, pp. 53-61. Elsevier 10.1016/j.phytochem.2015.10.006
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Bianchi, Sauro; Mayer, Ingo; Pichelin, Frédéric (2015). Chemische Eigenschaften von Rindenextrakten und Einsatz daraus hergestellter tanninbasierter Klebstoffe In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.
Bianchi, Sauro; Gloess, Alexia N.; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric (2014). Analysis of the structure of condensed tannins in water extracts from bark tissues of Norway spruce (Picea abies [Karst.]) and Silver fir (Abies alba [Mill.]) using MALDI-TOF mass spectrometry. Industrial Crops and Products, 61, pp. 430-437. Elsevier 10.1016/j.indcrop.2014.07.038
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services
Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037
Bonney Brüllmann, Claire (2015). French Emigré Architecture in Jefferson County, New York Basel: (Glaser + Weisskopf)
Willmann, Jan; Knauss, Michael; Bonwetsch, Tobias; Apolinarska, Anna Aleksandra; Gramazio, Fabio; Kohler, Matthias (2016). Robotic timber construction : Expanding additive fabrication to new dimensions Automation in construction, 2016(61), pp. 16-23.
Boonstra, M.; Pizzi, A.; Ganne-Chédeville, Christelle; Properzi, M.; Leban, J. M.; Pichelin, Frédéric (2006). Vibration welding of heat-treated wood Journal of Adhesion Science and Technology, 20(4), pp. 359-369. 10.1163/156856106776381758
Frei, Reto; Wodrich, Matthew D.; Hari, Durga Prasad; Borin, Pierre-Antoine; Chauvier, Clément; Waser, Jérôme (2014). Fast and Highly Chemoselective Alkynylation of Thiols with Hypervalent Iodine Reagents Enabled through a Low Energy Barrier Concerted Mechanism. Journal of the American Chemical Society, 136(47), pp. 16563-16573. American Chemical Society (ACS) 10.1021/ja5083014
Rhême, Martin; Botsis, John; Cugnoni, Joël; Navi, Parviz (2015). Mixed mode fracture behavior of welded wood joints investigated with the Arcan test Wood Science and Technology, 50(1), pp. 53-69. Springer 10.1007/s00226-015-0782-0
Schwarz-Platzer, Katharina; Wendeler, Corinna; Braendle, Rico; Stolz, Martin (2019). Experimental investigation of forces along anchors subjected to dynamic loading under tension and compression in field tests Canadian Geotechnical Journal, 57(5), pp. 770-782. 10.1139/cgj-2018-0144
Beyer, Mario; Kránitz, Katalin; Bremer, Martina; Peters, Jana; Fischer, Steffen; Bues, Claus-Thomas; Niemz, Peter (2018). Effect of natural aging on the chemical composition of norway spruce, fir, and european oak wood. Pro Ligno, 14(2), pp. 3-19. Fundatia PRO Ligno
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M. I.; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2015). Distribution of Silica-Coated Silver/Gold Nanostars in Soft- and Hardwood Applying SERS-Based Imaging Langmuir, 32(1), pp. 274-283. American Chemical Society (ACS) 10.1021/acs.langmuir.5b03617
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.
Brombacher, Volker; Michel, Franco; Scheiding, Wolfram; Torres Uribe, Marco; Niemz, Peter (2017). Untersuchungen zum Einfluss einer nachträglichen Wärmebehandlung auf das Dämmverhalten von Holzfaserplatten. Bauphysik, 39(2), pp. 130-134. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201710005
Brombacher, Volker; Franco, Michel; Krug, Detlef; Torres, Marco U.; Niemz, Peter (2016). Investigations on improving wood fiber insulation boards depending on mechanical pulping conditions Bauphysik, 38(5), pp. 298-308. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201610026
Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002
Donzé, Marc; Uehlinger, Urs; Bühlmann, Urs; Bruderer, B. (2016). Replacing blocks for glazing windows with liquid filler In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Niemz, Peter; Zauner, M.; Brunner, A. J. (2015). In - situ Synchrotron based micro - tomography and acoustic emission measurement of Norway spruce samples under tensile load In: 19th. International Symposium on Nondestructive Testing and Evaluation of wood. Rio de Janeiro, Brazil. 22.-25.09.2015.
Brunner, A.J.; Clerc, Gaspard; Niemz, Peter (2018). Acoustic emission monitoring of adhesively bonded wood joints under quasistatic and cyclic fatigue mode II flexure loads using end-notch-flexure specimens In: 33rd European Conference on Acoustic Emission Testing. Senlis, France. 12-14.09.2018.
Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung
Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008
Bachtiar, Erik V.; Clerc, Gaspard; Brunner, Andreas J.; Kaliske, Michael; Niemz, Peter (2017). Static and dynamic tensile shear test of glued lap wooden joint with four different types of adhesives. Holzforschung, 71(5), pp. 391-396. De Gruyter 10.1515/hf-2016-0154
Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Brunner, Andreas J.; Baensch, Franziska; Sause, Markus G. R.; Zauner, Michaela; Niemz, Peter (2015). Schallemissionsanalyse und Synchrotron- basierte Mikrotomografie an verklebten Miniatur-Zugprüfkörpern aus Fichtenholz In: 20. Kolloquium Schallenemission. Garmisch-Partenkirchen, Germany. 18.-19.06.2015.
Kliger, Robert; Haghani, Reza; Brunner, Maurice Yaw; Harte, Annette M.; Schober, Kay-Uwe (2016). Wood-based beams strengthened with FRP laminates: improved performance with pre-stressed systems European Journal of Wood and Wood Products, 74(3), pp. 319-330. Springer 10.1007/s00107-015-0970-5
Donzé, Marc; Brunner, Maurice Yaw; Uehlinger, Urs (2016). Reinforced, insulated glazing for large windows In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Müller, Andreas; Brunner, Maurice Yaw (2014). Structural saftety thanks to quality: plan robustness, build with checks, monitor permanently In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Scharmacher, Florian; Müller, Andreas; Brunner, Maurice Yaw (2014). Asphalt surfacing on timber bridges In: COST Timber bridge conference. Biel/Bienne, Switzerland. 25.-26.09.2014.
Scharmacher, Florian; Müller, Andreas; Brunner, Maurice Yaw (2014). Timber Bridges with asphalt - surfacing technical specifications In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759
Lehmann, Martin; Brunner, Maurice Yaw; Kraft, Sebastian (2010). Higher load bearing capabilities with elastic glue lines for glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.
Vallée, T.; Tannert, T.; Lehmann, Martin; Brunner, Maurice Yaw (July 2009). Probabilistic strength prediction of adhesively bonded joints composed of wooden adherends In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Brunner, Maurice Yaw; Lehmann, Martin (2009). Frp-prestressed timber : losses in prestressing force due to elastic , creep and shrinkage deformations of the timber In: FRPRCS. Sydney, Australia. 13-15 Jul 2009.
Brunner, Maurice Yaw; Schnüriger, Marco; Roemer, Michael (2009). Holz-Beton-Platten mit Klebeverbund In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 705-710). Biberach: Institut für Holzbau Hochschule
Brunner, Maurice Yaw; Zürcher, Ernst (2009). Holzbrückenbau in Afrika: Neue Wege für Ghana Schweizer Holzbau, pp. 19-21.
Donzé, Marc; Brunner, Maurice Yaw (2009). Elastisch nachgiebige Klebefuge für Brettschichtholz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 819-824). Biberach, Deutschland: Institut für Holzbau Hochschule Biberach
Lehmann, Martin; Vallée, T.; Tannert, T.; Brunner, Maurice Yaw (2009). Adhesively bonded joints composed of wooden load-bearing elements In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
GEISTLICH & SOEHNE AG (2009). Glued laminated beam (EP2090413 (A1))
Brunner, Maurice Yaw; Donzé, Marc (2008). GLULAM REBORN : A flexible adhesive interface to increase the bending resistance of glulam Applied Sciences, p. 2008.
Brunner, Maurice Yaw; Schnueriger, M.; Lehmann, Martin (2008). Strengthening glulam beams with prestressed multilayer FRP carbon laminates In: Final Conference COST E34 Bonding of Timber (2008). Sopron, Hungary. 06.-07.05.2008.
Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.
Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari
Brunner, Maurice Yaw; Engels, Isabel (2007). The search for an adhesive to grant glulam ductile behaviour In: SEMC International Conference. 10-12 Sep 2007.
Brunner, Maurice Yaw (2006). On the increasing importance of tensile loading perpendicular to the grain in some new timber products In: World Conference on Timber Engineering. Portland, USA. 06.-10.08.2006.
Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))
Brunner, Maurice Yaw; Schnueriger, M. (2004). Strengthening of timber beams with prestressed artificial fibers: development of a suitable adhesive technology In: International Symposium on Advanced Timber and Timber-composites Elements for Building (pp. 45-50). San Michele all'Andige, Italy: CNR-Ivalsa
Clerc, Gaspard; Brülisauer, Martina; Affolter, Samuel; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2017). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive. International Journal of Adhesion and Adhesives, 72, pp. 130-138. Elsevier 10.1016/j.ijadhadh.2016.09.008
Bueche, Nicolas; Dumont, A.-G. (2016). Paquet de recherche PLANET : RS-5: Modèle global d'évaluation. In: contribution. Bericht 1595 (pp. 1-137). Bern: Bundesamt für Strassen ASTRA
Bueche, Nicolas; Dumont, A.-G.; Ould Henia, M. (2016). Paquet de recherche PLANET : RS-3: Formulation et optimisation des performances. In: contribution (pp. 1-109). Bern: Bundesamt für Strassen ASTRA
Raedle, W.; Letsch, Bernhard; Buehlmann, U.; Uehlinger, Urs (2016). Test requirements for testing access control systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Beyer, Mario; Kránitz, Katalin; Bremer, Martina; Peters, Jana; Fischer, Steffen; Bues, Claus-Thomas; Niemz, Peter (2018). Effect of natural aging on the chemical composition of norway spruce, fir, and european oak wood. Pro Ligno, 14(2), pp. 3-19. Fundatia PRO Ligno
Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002
OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))
Näher, Thomas; Thömen, Heiko; Burgert, Ingo (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft Zürich: Swiss Wood Innovation Network S-Win
Noël, Marion; Grosse, Charlotte; Burud, I.; Gérardin, Philippe (2018). Biopolyesters for wood modification : technical validation towards implementation In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Böger, Thomas; Bianchi, Sauro; Salzer, Corinna; Pichelin, Frédéric (2017). Binderless boards made of milled coconut husk: an analysis of the technical feasibility and process restraints. International Wood Products Journal, 9(1), pp. 3-8. Taylor & Francis 10.1080/20426445.2017.1400756
Donzé, Marc; Uehlinger, Urs; Bühlmann, Urs; Bruderer, B. (2016). Replacing blocks for glazing windows with liquid filler In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Letsch, Bernhard; Bühlmann, Urs; Uehlinger, Urs (2016). Thermal properties of access systems in field trials In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Bühlmann, Urs; Tröbs, Hans-Martin; Zemp, Armin; Uehlinger, Urs (2016). Noise management through automated window systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Letsch, Bernhard; Kümmin, P.; Uehlinger, Urs; Bühlmann, Urs (2015). Thermal properties of door and window access systems In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Uehlinger, Urs; Bühlmann, Urs; Kümmin, P. (2015). An ecological solution for wooden window frame enlargements In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Donzé, Marc; Uehlinger, Urs; Rellstab, Christoph; Bühlmann, Urs (2015). Structural Sealant Glazing (SSG) – reinventing the wooden window In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Stolz, Martin; Büttner, Daniel (2015). Grundlagen für die Anforderungen an Schutzgeokunststoffe auf der Basis von neuen EN-Prüfmethoden Schweizerischer Verband der Strassen- und Verkehrsfachleute
Büttner, Daniel; Stolz, Martin; Balazs, Fonyo (2014). Forschungsprojekt über Geokunststoffe als Schutz der Abdichtung geotchnischer Bauwerke. Strasse und Verkehr, 9, pp. 30-32.
Cala, M.; Stolz, Martin; Baraniak, P.; Rist, Armin; Roduner, A. (2013). Large scale field tests for slope stabilizations made with flexible facings (Unpublished). In: EUROCK 2013 International Symposium on Rock Mechanics for Resources, Energy and Environment. Wroclaw, Polen. 21.-26.09.2013.
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839
Campiche, Sophie; Ganne-Chédeville, Christelle; Volkmer, Thomas; Grand, Emilie; Werner, Inge; Ferrari, Benoit J.-D. (2015). Current knowledge and evaluation of potential toxicity for soil organisms Lausanne: Centre Ecotox
Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.
Canoine, Benoît (2019). Le bois densifié, un bois «exotique» local spirit biel/bienne, 2, p. 23.
OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))
Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.
Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.
Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641
Frei, Reto; Wodrich, Matthew D.; Hari, Durga Prasad; Borin, Pierre-Antoine; Chauvier, Clément; Waser, Jérôme (2014). Fast and Highly Chemoselective Alkynylation of Thiols with Hypervalent Iodine Reagents Enabled through a Low Energy Barrier Concerted Mechanism. Journal of the American Chemical Society, 136(47), pp. 16563-16573. American Chemical Society (ACS) 10.1021/ja5083014
Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus
Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung
Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003
Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008
Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH
OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Strahm, Thomas; Niemz, Peter (2018). Improvement of ash (Fraxinus excelsior L.) bonding quality with one-component polyurethane adhesive and hydrophilic primer for load-bearing application. International Journal of Adhesion and Adhesives, 85, pp. 303-307. Elsevier 10.1016/J.IJADHADH.2018.06.017
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Niemz, Peter (2018). Improvement of ash (Fraxinus Excelsior L.) bonding quality with one component polyuerethane adhesive and a primer for glued laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Lehmann, Martin; Clerc, Gaspard; Lehringer, C.; Strahm, T.; Volkmer, Thomas; ; (2018). Investigation of the bond quality and the finger joint strength of beech glulam In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Brunner, A.J.; Clerc, Gaspard; Niemz, Peter (2018). Acoustic emission monitoring of adhesively bonded wood joints under quasistatic and cyclic fatigue mode II flexure loads using end-notch-flexure specimens In: 33rd European Conference on Acoustic Emission Testing. Senlis, France. 12-14.09.2018.
Clerc, Gaspard; Brülisauer, Martina; Affolter, Samuel; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2017). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive. International Journal of Adhesion and Adhesives, 72, pp. 130-138. Elsevier 10.1016/j.ijadhadh.2016.09.008
Bachtiar, Erik V.; Clerc, Gaspard; Brunner, Andreas J.; Kaliske, Michael; Niemz, Peter (2017). Static and dynamic tensile shear test of glued lap wooden joint with four different types of adhesives. Holzforschung, 71(5), pp. 391-396. De Gruyter 10.1515/hf-2016-0154
Volkmer, Thomas; Lehmann, Martin; Clerc, Gaspard (2017). Brettschichtholz aus Buche: Keilzinkenverbindung und Flächenverklebung In: 23. Internationales Holzbau-Forum. Garmisch-Partenkirchen, Deutschland. 06.-08.12.2017.
Clerc, Gaspard; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2016). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Lehmann, Martin; Clénin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Baublatt : aktuelle Informationen für die Schweizer Baubranche(41), pp. 28-30. Docu Media Schweiz
Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2
Zürcher, Ernst; Schlaepfer, R.; Giudici, F. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste
Zürcher, Ernst; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759
Frei, Reto; Courant, Thibaut; Wodrich, Matthew D.; Waser, Jerome (2014). General and Practical Formation of Thiocyanates from Thiols. Chemistry - A European Journal, 21(6), pp. 2662-2668. Wiley-Blackwell - STM 10.1002/chem.201406171
Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.
Rhême, Martin; Botsis, John; Cugnoni, Joël; Navi, Parviz (2015). Mixed mode fracture behavior of welded wood joints investigated with the Arcan test Wood Science and Technology, 50(1), pp. 53-69. Springer 10.1007/s00226-015-0782-0
Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088
Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020
Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444
Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.
Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648
Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419
Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4
Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007
Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.
Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037
Placencia Peña, M.I.; Deutschle, A.L.; Saake, B.; Pizzi, A.; Pichelin, Frédéric (2016). Study of the solubility and composition of welded wood material at progressive welding times European Journal of Wood and Wood Products, 74(2), pp. 191-201. Springer 10.1007/s00107-015-0991-0
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
Tellnes, Lars GF; Ganne-Chédeville, Christelle; Dias, Ana; Dolezal, Franz; Hill, Callum; Zea Escamilla, Edwin (2017). Comparative assessment for biogenic carbon accounting methods in carbon footprint of products : a review study for construction materials based on forest products. iForest : Biogeosciences and Forestry, 10(5), pp. 815-823. Italian Society of Silviculture and Forest Ecology 10.3832/ifor2386-010
Ganne-Chédeville, Christelle; Diederichs, Stefan (2015). Potential Environmental Benefits of Ultralight Particleboards with Biobased Foam Cores International Journal of Polymer Science, 2015, pp. 1-14. Hindawi 10.1155/2015/383279
Franke, Steffen; Franke, Bettina; Harte, Annette (2015). Reinforcement of timber beams In: Harte, Annette; Dietsch, Philipp (eds.) Reinforcement of Timber Struchtures, A state of the art report (pp. 5-24). Aachen: Shaker Verlag
Dietsch, Philipp; Franke, Steffen; Franke, Bettina; Gamper, Andreas; Winter, Stefan (2014). Methods to determine wood moisture content and their applicability in monitoring concepts. Journal of Civil Structural Health Monitoring, 5(2), pp. 115-127. Springer 10.1007/s13349-014-0082-7
Ding, T.; Bianchi, Sauro; Ganne-Chédeville, Christelle; Kilpeläinen, P.; Haapala, A.; Räty, T. (2017). Life cycle assessment of tannin extraction from spruce bark. iForest: Biogeosciences and Forestry, 10(5), pp. 807-814. 10.3832/ifor2342-010
Doerfel, Marion (1 November 2015). Evaluation of Road Safety audit Reports in Switzerland regarding Safety Deficiencies In: Internationale Konferenz. Seoul / Southkorea. 01.11.2015.
Doerfel, Marion; Sinclair, M.; Zyryanov, V.; Gerlach, J. (2015). Education, science and practice: international student workshops focus on successful infrastructure solutions to improve VRUs' safety In: Internationale Konferenz. Seoul, Southkorea. 01.11.2015.
Tellnes, Lars GF; Ganne-Chédeville, Christelle; Dias, Ana; Dolezal, Franz; Hill, Callum; Zea Escamilla, Edwin (2017). Comparative assessment for biogenic carbon accounting methods in carbon footprint of products : a review study for construction materials based on forest products. iForest : Biogeosciences and Forestry, 10(5), pp. 815-823. Italian Society of Silviculture and Forest Ecology 10.3832/ifor2386-010
Uehlinger, Urs; Donzé, Marc (2017). Isolierglas flüssig verklotzen Glas+Rahmen, 10, pp. 16-18.
Masuch, A.; Uehlinger, Urs; Donzé, Marc (2016). Die Klotzbrücke kommt aus der Tube Glaswelt, 3, pp. 58-60. Gentner
Donzé, Marc; Uehlinger, Urs; Bühlmann, Urs; Bruderer, B. (2016). Replacing blocks for glazing windows with liquid filler In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Donzé, Marc; Brunner, Maurice Yaw; Uehlinger, Urs (2016). Reinforced, insulated glazing for large windows In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Donzé, Marc (2015). Fenêtre innovante avec collage extérieur Fassade, 1(2015), pp. 14-15. Verlagsanstalt Handwerk GmbH
Donzé, Marc (2015). Klebetechnologie im Fensterbau Fassade / Façade, 1(2015), pp. 9-15.
Donzé, Marc; Kammer, D.; Uehlinger, Urs (2015). Optimal characteristics and dimensions of glazing components in building skins In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Donzé, Marc; Uehlinger, Urs; Rellstab, Christoph; Bühlmann, Urs (2015). Structural Sealant Glazing (SSG) – reinventing the wooden window In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Donzé, Marc (2014). Entwicklung eines Holzfenstersystems mit aussenliegender Verglasung In: S-Win Tagung. 46. Fortbildungskurs - Holzverbindungen mit Klebstoffen für die Bauanwendung. Weinfelden, Switzerland. 21.-22.10.2014.
Donzé, Marc; Brunner, Maurice Yaw (2009). Elastisch nachgiebige Klebefuge für Brettschichtholz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 819-824). Biberach, Deutschland: Institut für Holzbau Hochschule Biberach
GEISTLICH & SOEHNE AG (2009). Glued laminated beam (EP2090413 (A1))
Brunner, Maurice Yaw; Donzé, Marc (2008). GLULAM REBORN : A flexible adhesive interface to increase the bending resistance of glulam Applied Sciences, p. 2008.
Rehm, Klaus; Nühse, Jan Hendrik; Letsch, Bernhard; Dreier, Raphael; Kalt, Raphael (2016). Pulverbeschichtung von Holzwerkstoffen : Neue Lacke und Technologien Holztechnologie, 57(1), pp. 17-22.
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939
Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).
Bueche, Nicolas; Dumont, A.-G. (2016). Paquet de recherche PLANET : RS-5: Modèle global d'évaluation. In: contribution. Bericht 1595 (pp. 1-137). Bern: Bundesamt für Strassen ASTRA
Bueche, Nicolas; Dumont, A.-G.; Ould Henia, M. (2016). Paquet de recherche PLANET : RS-3: Formulation et optimisation des performances. In: contribution (pp. 1-109). Bern: Bundesamt für Strassen ASTRA
Ehrhart, Thomas; Lehmann, Martin; Frangi, Andrea (2019). European beech ( Fagus sylvatica L .) glued laminated timber : Lamination strength grading , production and mechanical properties In: International Scientific Conference on Hardwood Processing, ISCHP 19 (pp. 252-267). TU Delft
Rehm, Klaus; Letsch, Bernhard; Kalt, Raphael; Emmenegger, Florian (2014). Beschichtungsprozesse im Vergleich - Prozessbetrachtung und Kostenvergleich In: 1. MDF Pulversymposium 2014. Markdorf, Germany. 26.-27.11.2014.
Brunner, Maurice Yaw; Engels, Isabel (2007). The search for an adhesive to grant glulam ductile behaviour In: SEMC International Conference. 10-12 Sep 2007.
Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Ammann AG (2004). Connecting element (EP 1 437 040 A1)
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Fitzken Da Vinci M. Niro, J.; Kyriazopoulos, Michail; Bianchi, Sauro; Mayer, Ingo; Eusebio, D.A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2016). Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives. International Wood Products Journal, 7(4), pp. 208-214. Taylor & Francis 10.1080/20426445.2016.1207039
Schnell, Dieter (2015). Zur Wiederentdeckung der historischen Stadt in den 1970er Jahren In: Falser, M.; Lipp, W. (eds.) Eine Zukunft für unsere Vergangenheit. Zum 40. Jubiläum des Europäischen Denkmalschutzjahres (1975-2015) (pp. 63-72). Berlin: Hendrik Blässler Verlag
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759
Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))
Farajzadeh Moshtaghin, A.; Franke, Steffen; Keller, T.; Vassilopoulos, A. (June 2016). Quantification of spatial variability for transverse elastic modulus of spruce wood In: ECCOMAS Congress 2016. Kreta, Griechenland. 05.-10.06.2016.
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Campiche, Sophie; Ganne-Chédeville, Christelle; Volkmer, Thomas; Grand, Emilie; Werner, Inge; Ferrari, Benoit J.-D. (2015). Current knowledge and evaluation of potential toxicity for soil organisms Lausanne: Centre Ecotox
Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management
Beyer, Mario; Kránitz, Katalin; Bremer, Martina; Peters, Jana; Fischer, Steffen; Bues, Claus-Thomas; Niemz, Peter (2018). Effect of natural aging on the chemical composition of norway spruce, fir, and european oak wood. Pro Ligno, 14(2), pp. 3-19. Fundatia PRO Ligno
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Fitzken Da Vinci M. Niro, J.; Kyriazopoulos, Michail; Bianchi, Sauro; Mayer, Ingo; Eusebio, D.A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2016). Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives. International Wood Products Journal, 7(4), pp. 208-214. Taylor & Francis 10.1080/20426445.2016.1207039
Roduner, A.; Flum, D.; Stolz, Martin; Gröner, E. (2015). Large-scale field tests with flexible slope stabilization systems In: XVI European conference on soil mechanics and geotechnical engineering. Edinburgh, Scotland. 13.-17.09.2015.
Stolz, Martin; Flum, Daniel; Roduner, Armin (2014). Grossfeldversuche mit flexiblen Böschungsstabilisierungssystemen. Österreichische Ingenieur- und Architekten-Zeitschrift, 159(1–12), pp. 28-31.
Schnell, Dieter (2017). Zur Architekturkrise in Bern. In: Flückiger, G.; Krethlow, M.; Tobler, K. (eds.) Bern 70 (pp. 111-124). Bern: Edition Atelier
Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2018). Beurteilung der Feuchteproduktion durch Klimamessungen in natürlich belüfteten Wohnräumen In: Fouad, Nabil A. (ed.) Bauphysik Kalender 2018: Feuchteschutz und Bauwerksabdichtung (pp. 191-224). Berlin, Deutschland: Wilhelm Ernst & Sohn
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2017). Bemessung des Wärmeschutzes der Gebäudehülle auf der Grundlage von Raumklimamessungen In: Fouad, Nabil A. (ed.) Bauphysik Kalender 2017: Gebäudehülle und Fassaden 17 (pp. 577-601). Weinheim: John Wiley & Sons, Inc. 10.1002/9783433607794.ch17
Brombacher, Volker; Franco, Michel; Krug, Detlef; Torres, Marco U.; Niemz, Peter (2016). Investigations on improving wood fiber insulation boards depending on mechanical pulping conditions Bauphysik, 38(5), pp. 298-308. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201610026
Ehrhart, Thomas; Lehmann, Martin; Frangi, Andrea (2019). European beech ( Fagus sylvatica L .) glued laminated timber : Lamination strength grading , production and mechanical properties In: International Scientific Conference on Hardwood Processing, ISCHP 19 (pp. 252-267). TU Delft
Zoellig, Stefan; Frangi, Andrea; Franke, Steffen; Muster, Marcel (August 2016). Timber structures 3.0 - New technology for multi-axial, slim, high performance timber structures In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Franke, Steffen; Franke, Bettina; Müller, Andreas; Heubuch, Sebastian Pascal (4 December 2019). Stabdübelverbindungen und eingeklebte Gewindestangen in Buchen-BSH In: 25. Internationales Holzbau-Forum (IHF 2019). Congress Innsbruck Österreich. 4. - 6.12.2019.
Heubuch, Sebastian Pascal; Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Eingeklebte Gewindestangen in Buchen BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Stabdübelverbindungen in Buchen-BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoff. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Franke, Bettina (22 October 2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektpartner In: 51. Fortbildungskurs S-WIN: Hochleistungs werkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Franke, Bettina (August 2019). Steel dowel connections in beech hardwood In: International Network on Timber Engineering (INTER). Tacoma. 26.08.2019-29.08.2019.
Müller, Andreas; Franke, Bettina (2019). Prüfung von geklebten Vollholzprodukten Wir Holzbauer, 5, pp. 26-29.
Müller, Andreas; Franke, Bettina (5 June 2019). Zustandserfassung - Einführung und Methodik In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen; Müller, Andreas (5 June 2019). Bewertung der Holzfeuchte und deren Auswirkungen In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Steffen; Franke, Bettina (5 June 2019). Technische Methoden der Zustandserfassung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Schiere, Marcus Jacob; Franke, Bettina; Scharmacher, Florian (5 June 2019). Leistungsfähigkeit der Klebefuge in Brettschichtholz In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (5 June 2019). Einsatz der Pressverklebung - Forschungsergebnisse In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Moisture content and moisture-induced stresses of large glulam members: laboratory tests, in-situ measurements and modelling Wood Material Science & Engineering, 14(4), pp. 243-252. Taylor & Francis 10.1080/17480272.2018.1551930
Franke, Steffen; Franke, Bettina (2019). Fundamentals and recent strength results of connections in modern hardwood timber structures Wood Material Science & Engineering, 14(4), pp. 234-242. Taylor & Francis 10.1080/17480272.2018.1526822
Franke, Steffen; Franke, Bettina (2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektteam, Ergebnisse In: 51. Fortbildungskurs S-WIN: Laubholz für Hochleistungen im Bauwesen. Weinfelden, Suisse. 22.-23.10.2019.
Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen (2018). Stress developments in large timber cross sections in relation to geometry and encountered climate In: 2018 World Conference on Timber Engineering. Seoul / Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Franke, Bettina (2018). Multiple steel dowel type connections in beech hardwood In: 2018 World Conference on Timber Engineering. Seoul / Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Franke, Bettina (2018). Dowelled connections and glued-in rods in beech wood In: Cost Action FP1402 / WG3. Zurich, Switzerland. 25.-26.10.2018.
Franke, Steffen; Franke, Bettina; Tuhkanen, E. (2018). Test methods for determination of design parameters of fasteners In: Cost Action FP1402 / WG3. Zurich, Switzerland. 25.-26.10.2018.
Franke, Steffen; Heubuch, Sebastian Pascal; Franke, Bettina (2018). Glued-in rods in beech hardwood - investing of predrilling diameter and pull-out resistance In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (2018). Pressverklebung aus der Sicht der Forschung In: S-Win-Tagung 2018, Von der Forschung zur Praxis. Biel/Bienne, Switzerland. 16.05.2018.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (2018). Press glued connections: research results for discussion and standardization In: International Network on Timber Engineering Research (INTER 2018). Tallinn, Estonia. 13.-16.08.2018.
Schiere, Marcus Jacob; Franke, Bettina; Franke, Steffen (2018). Antworten zur Tragfähigkeit infolge dynamischer Klimawechsel In: S-Win-Tagung 2018, Von der Forschung zur Praxis. Biel/Bienne, Switzerland. 16.05.2018.
Schiere, Marcus Jacob; Franke, Bettina; Franke, Steffen; Müller, Andreas (2018). Comparison between local versus regional climate using monitoring data of timber structures In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Franke, Bettina; Magnière, Noëlie (16 June 2017). Load carrying capacity of cracked beams In: European workshop: Possible appearance of cracks during the life of glulam components in service class 1 and 2. Paris, France. 16.06.2017.
Müller, Andreas; Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen (June 2017). Advantages of moisture content monitoring in timber bridges In: 3rd International Conference on Timber Bridges. Skellefteå, Sweden. 26.-29.06.2017.
Franke, Bettina; Franke, Steffen; Müller, Andreas; Schiere, Marcus Jacob (2017). Long-term behaviour of moisture content in timber constructions: relation to service classes and crack initiation. In: European workshop: possible appearance of cracks during the life of glulam components in service class 1 and 2. Paris, France. 16.06.2017.
Franke, Steffen; Franke, Bettina; Schiere, Marcus Jacob; Müller, Andreas (2017). Timber bridges: load carrying behaviour according to climate changes In: 39th IABSE Symposium - Engineering the Future. Vancouver, Canada. 21.-23.09.2017.
Franke, Bettina (2017). Holzfeuchte smart kalkuliert für moderne Tragquerschnitte In: 49. S-WIN Fortbildungskurs. Weinfelden, Schweiz. 24.-25.10.2017.
Franke, Bettina; Franke, Steffen; Müller, Andreas; Schiere, Marcus Jacob (August 2016). Long-term behaviour of moisture content in timber constructions: relation to service classes In: INTER. Graz, Österreich. 16.-19.08.2016.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (August 2016). Moisture diffusion in wood: experimental and numerical investigations In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Naderer, Elisabeth; Franke, Steffen; Franke, Bettina (August 2016). Numerical simulation of reinforced timber structures perpendicualr to the grain In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Franke, Steffen; Franke, Bettina; Magniere, Noëlie (August 2016). Load carrying capacity of cracked beams In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Franke, Bettina; Müller, Andreas; Simon, Antje (2016). Holzbrücken - Erkenntnisse zum Feuchteverhalten in den Tragquerschnitten aus Langzeitmessungen Bautechnik, 93(11), pp. 801-806. Wiley-Blackwell - STM 10.1002/bate.201600062
Müller, Andreas; Franke, Bettina (2016). Langzeit-Monitoring von Holzbrücken – Erkenntnisse zum Feuchteverhalten im Tragquerschnitt In: Internationale Holzbrückentage IHB 2016. Filderstadt, Deutschland. 08.-09.06.2016.
Franke, Bettina; Lehringer, C.; Müller, Andreas; Sauser, Flavien (2016). Beech Glulam - Investigations of surface preparation and gluing In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Franke, Bettina; Franke, Steffen; Müller, Andreas (2015). Case studies: long term monitoring of timber bridges. Journal of Civil Structural Health Monitoring, 5(2), pp. 195-202. Springer 10.1007/s13349-014-0093-4
Franke, Steffen; Franke, Bettina; Harte, A. (2015). Failure modes and reinforcement techniques for timber beams - State of the art Construction and Building Materials, 97, pp. 2-13. 10.1016/j.conbuildmat.2015.06.021
Franke, Steffen; Franke, Bettina; Harte, Annette (2015). Reinforcement of timber beams In: Harte, Annette; Dietsch, Philipp (eds.) Reinforcement of Timber Struchtures, A state of the art report (pp. 5-24). Aachen: Shaker Verlag
Müller, Andreas; Franke, Bettina (2015). Methoden der Zustandserfassung bei Holzbauwerken In: 8. Europäischer Kongress (EBH 2015). Bauen mit Holz im urbanen Raum. Köln, Germany. 21.-22.10.2015.
Dietsch, Philipp; Franke, Steffen; Franke, Bettina; Gamper, Andreas; Winter, Stefan (2014). Methods to determine wood moisture content and their applicability in monitoring concepts. Journal of Civil Structural Health Monitoring, 5(2), pp. 115-127. Springer 10.1007/s13349-014-0082-7
Franke, Bettina; Quenneville, Pierre (2014). Analysis of the fracture behavior of Radiata Pine timber and Laminated Veneer Lumber. Engineering Fracture Mechanics, 116, pp. 1-12. Elsevier 10.1016/j.engfracmech.2013.12.004
Müller, Andreas; Franke, Bettina (2014). Assessment ‐ Introduction, procedure and methodology In: COST FP 1101 Workshop. Biel/Bienne, Switzerland. 23.-24.09.2014.
Franke, Bettina; Schusser, A.; Müller, Andreas (2014). Analysis of finger joints from beech wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Müller, Andreas; Franke, Bettina; Franke, Steffen (2014). Langzeit-Monitoring von Holzbrücken: Erkenntnisse zum Feuchteverhalten im Tragquerschnitt In: 1. Brückenkolloquium: Beurteilung und Ertüchtigung und Instandsetzung von Brücken. Ostfildern, Germany. 24.-25.06.2014.
Müller, Andreas; Franke, Bettina; Scharmacher, Florian (2014). Zustandserfassung von Holztragwerken - Stand der Technik In: 1. Brückenkolloquium: Beurteilung u. Ertüchtigung und Instandsetzung von Brücken. Ostfildern, Germany. 24.-25.06.2014.
Franke, Steffen; Franke, Bettina (2014). Causes, assessment and impact of cracks in timber elements In: COST FP 1101 Workshop. Biel, Switzerland. 23.-24.09.2014.
Franke, Steffen; Franke, Bettina (2014). X-Ray technology for the assessment of timber structures In: COST FP 1101 Workshop. Biel, Switzerland. 23.-24.09.2014.
Magnière, Noëlie; Franke, Steffen; Franke, Bettina (2014). Investigation on Elements Presenting Cracks in Timber Structures In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Volkmer, Thomas; Franke, Bettina; Schusser, Anna (2014). Analysis of the Penetration of Adhesives at Finger-Joints in Beech Wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Franke, Steffen; Franke, Bettina; Müller, Andreas; Heubuch, Sebastian Pascal (4 December 2019). Stabdübelverbindungen und eingeklebte Gewindestangen in Buchen-BSH In: 25. Internationales Holzbau-Forum (IHF 2019). Congress Innsbruck Österreich. 4. - 6.12.2019.
Heubuch, Sebastian Pascal; Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Eingeklebte Gewindestangen in Buchen BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Stabdübelverbindungen in Buchen-BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoff. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Franke, Bettina (22 October 2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektpartner In: 51. Fortbildungskurs S-WIN: Hochleistungs werkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Franke, Bettina (August 2019). Steel dowel connections in beech hardwood In: International Network on Timber Engineering (INTER). Tacoma. 26.08.2019-29.08.2019.
Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen; Müller, Andreas (5 June 2019). Bewertung der Holzfeuchte und deren Auswirkungen In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Steffen; Franke, Bettina (5 June 2019). Technische Methoden der Zustandserfassung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (5 June 2019). Einsatz der Pressverklebung - Forschungsergebnisse In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Moisture content and moisture-induced stresses of large glulam members: laboratory tests, in-situ measurements and modelling Wood Material Science & Engineering, 14(4), pp. 243-252. Taylor & Francis 10.1080/17480272.2018.1551930
Franke, Steffen; Franke, Bettina (2019). Fundamentals and recent strength results of connections in modern hardwood timber structures Wood Material Science & Engineering, 14(4), pp. 234-242. Taylor & Francis 10.1080/17480272.2018.1526822
Franke, Steffen; Franke, Bettina (2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektteam, Ergebnisse In: 51. Fortbildungskurs S-WIN: Laubholz für Hochleistungen im Bauwesen. Weinfelden, Suisse. 22.-23.10.2019.
Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen (2018). Stress developments in large timber cross sections in relation to geometry and encountered climate In: 2018 World Conference on Timber Engineering. Seoul / Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Franke, Bettina (2018). Multiple steel dowel type connections in beech hardwood In: 2018 World Conference on Timber Engineering. Seoul / Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Franke, Bettina (2018). Dowelled connections and glued-in rods in beech wood In: Cost Action FP1402 / WG3. Zurich, Switzerland. 25.-26.10.2018.
Franke, Steffen; Franke, Bettina; Tuhkanen, E. (2018). Test methods for determination of design parameters of fasteners In: Cost Action FP1402 / WG3. Zurich, Switzerland. 25.-26.10.2018.
Franke, Steffen; Heubuch, Sebastian Pascal; Franke, Bettina (2018). Glued-in rods in beech hardwood - investing of predrilling diameter and pull-out resistance In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (2018). Pressverklebung aus der Sicht der Forschung In: S-Win-Tagung 2018, Von der Forschung zur Praxis. Biel/Bienne, Switzerland. 16.05.2018.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (2018). Press glued connections: research results for discussion and standardization In: International Network on Timber Engineering Research (INTER 2018). Tallinn, Estonia. 13.-16.08.2018.
Schiere, Marcus Jacob; Franke, Bettina; Franke, Steffen (2018). Antworten zur Tragfähigkeit infolge dynamischer Klimawechsel In: S-Win-Tagung 2018, Von der Forschung zur Praxis. Biel/Bienne, Switzerland. 16.05.2018.
Schiere, Marcus Jacob; Franke, Bettina; Franke, Steffen; Müller, Andreas (2018). Comparison between local versus regional climate using monitoring data of timber structures In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Schiere, Marcus Jacob; Franke, Steffen (2018). Quality of press glued connections manufactured with different fasteners and production techniques In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Schiere, Marcus Jacob; Franke, Steffen (2018). Adhesive curing pressure for press gluing apllications established through different fastener types In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of cross laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20-23.08.2018.
Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of bross laminated timber In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (September 2017). Development of FBGS-systems for monitoring purposes of large timber structures In: SMAR 2017 - Fourth Conference on Smart Monitoring. Assessment and Rehabilitation of Civil Structures. Zürich, Schweiz. 13.-15.09.2017.
Franke, Steffen; Franke, Bettina; Magnière, Noëlie (16 June 2017). Load carrying capacity of cracked beams In: European workshop: Possible appearance of cracks during the life of glulam components in service class 1 and 2. Paris, France. 16.06.2017.
Müller, Andreas; Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen (June 2017). Advantages of moisture content monitoring in timber bridges In: 3rd International Conference on Timber Bridges. Skellefteå, Sweden. 26.-29.06.2017.
Franke, Bettina; Franke, Steffen; Müller, Andreas; Schiere, Marcus Jacob (2017). Long-term behaviour of moisture content in timber constructions: relation to service classes and crack initiation. In: European workshop: possible appearance of cracks during the life of glulam components in service class 1 and 2. Paris, France. 16.06.2017.
Franke, Steffen; Franke, Bettina; Schiere, Marcus Jacob; Müller, Andreas (2017). Timber bridges: load carrying behaviour according to climate changes In: 39th IABSE Symposium - Engineering the Future. Vancouver, Canada. 21.-23.09.2017.
Franke, Steffen; Hausammann, Roman; Schiere, Marcus Jacob (October 2016). Development of a span wood based self-supported compact façade system for non-residential buildings In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Franke, Bettina; Franke, Steffen; Müller, Andreas; Schiere, Marcus Jacob (August 2016). Long-term behaviour of moisture content in timber constructions: relation to service classes In: INTER. Graz, Österreich. 16.-19.08.2016.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (August 2016). Moisture diffusion in wood: experimental and numerical investigations In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Franke, Steffen (August 2016). Mechanical properties of beech CLT In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Naderer, Elisabeth; Franke, Steffen; Franke, Bettina (August 2016). Numerical simulation of reinforced timber structures perpendicualr to the grain In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Zoellig, Stefan; Frangi, Andrea; Franke, Steffen; Muster, Marcel (August 2016). Timber structures 3.0 - New technology for multi-axial, slim, high performance timber structures In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Franke, Steffen; Franke, Bettina; Magniere, Noëlie (August 2016). Load carrying capacity of cracked beams In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Farajzadeh Moshtaghin, A.; Franke, Steffen; Keller, T.; Vassilopoulos, A. (June 2016). Quantification of spatial variability for transverse elastic modulus of spruce wood In: ECCOMAS Congress 2016. Kreta, Griechenland. 05.-10.06.2016.
Franke, Steffen; Gruetter, D. (2016). Development of a quality management plan for timber bridges In: TU1406. Belgrad, SRB. 30.03.-01.04.2016.
Hausammann, Roman; Franke, Steffen; Schiere, Marcus Jacob; Giordano, Nicolàs (2016). Development of a long span self-supporting compact façade system for industrial buildings In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Moshtaghin, Alireza F.; Franke, Steffen; Keller, Thomas; Vassilopoulos, Anastasios P. (2016). Random field-based modeling of size effect on the longitudinal tensile strength of clear timber Structural Safety, 58, pp. 60-68.
Moshtaghin, Alireza Farajzadeh; Franke, Steffen; Keller, Thomas; Vassilopoulos, Anastasios P. (May 2015). Spatial variability in longitudinal elastic modulus of clear timber In: EUROMECH-Colloquium 556 on Wood Mechanics. Dresden, Germany. 27-29.05.2015.
Franke, Bettina; Franke, Steffen; Müller, Andreas (2015). Case studies: long term monitoring of timber bridges. Journal of Civil Structural Health Monitoring, 5(2), pp. 195-202. Springer 10.1007/s13349-014-0093-4
Riggio, Mariapaola; Sandak, Jakub; Franke, Steffen (2015). Application of imaging techniques for detection of defects, damage and decay in timber structures on site Construction and Building Materials, 101(2), pp. 1241-1252. Elsevier 10.1016/j.conbuildmat.2015.06.065
Franke, Steffen; Franke, Bettina; Harte, A. (2015). Failure modes and reinforcement techniques for timber beams - State of the art Construction and Building Materials, 97, pp. 2-13. 10.1016/j.conbuildmat.2015.06.021
Franke, Steffen; Franke, Bettina; Harte, Annette (2015). Reinforcement of timber beams In: Harte, Annette; Dietsch, Philipp (eds.) Reinforcement of Timber Struchtures, A state of the art report (pp. 5-24). Aachen: Shaker Verlag
Dietsch, Philipp; Franke, Steffen; Franke, Bettina; Gamper, Andreas; Winter, Stefan (2014). Methods to determine wood moisture content and their applicability in monitoring concepts. Journal of Civil Structural Health Monitoring, 5(2), pp. 115-127. Springer 10.1007/s13349-014-0082-7
Müller, Andreas; Franke, Bettina; Franke, Steffen (2014). Langzeit-Monitoring von Holzbrücken: Erkenntnisse zum Feuchteverhalten im Tragquerschnitt In: 1. Brückenkolloquium: Beurteilung und Ertüchtigung und Instandsetzung von Brücken. Ostfildern, Germany. 24.-25.06.2014.
Franke, Steffen; Franke, Bettina (2014). Causes, assessment and impact of cracks in timber elements In: COST FP 1101 Workshop. Biel, Switzerland. 23.-24.09.2014.
Franke, Steffen; Franke, Bettina (2014). X-Ray technology for the assessment of timber structures In: COST FP 1101 Workshop. Biel, Switzerland. 23.-24.09.2014.
Franke, Steffen; Magnière, Noëlie (2014). Discussion of testing and evaluation methods for the embedment behaviour of connections In: INTER 2014. Bath, United Kingdom. 01.-04.09.2014.
Franke, Steffen; Marto, João (2014). Investigation of Eucalyptus Globulus Wood for the Use as an Engineered Material In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Hausammann, Roman; Franke, Steffen (2014). A Modular Timber Construction System of Hollow-Box Elements In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Magnière, Noëlie; Franke, Steffen; Franke, Bettina (2014). Investigation on Elements Presenting Cracks in Timber Structures In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Franke, Tom; Volkmer, Thomas (2018). Mineralization of wood with calcium oxalate In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17-18.09.2018.
Nyffenegger, Franziska; Yavuz, V.; Akçar, N.; Ivy-Ochs, S.; Fredin, O.; Schlunegger, F. (2015). Rearward landsliding in sensitive clays: February 2011 massive failures at the Cöllolar coalfields, eastern Turkey (Unpublished). In: 13th Swiss Geoscience Meeting. Basel. 20.-21.11.2015.
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)
Frei, Reto (2017). Un pas en avant vers des matériaux renouvelables efficaces spirit biel/bienne, 1, pp. 16-17.
Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641
Frei, Reto; Courant, Thibaut; Wodrich, Matthew D.; Waser, Jerome (2014). General and Practical Formation of Thiocyanates from Thiols. Chemistry - A European Journal, 21(6), pp. 2662-2668. Wiley-Blackwell - STM 10.1002/chem.201406171
Frei, Reto; Wodrich, Matthew D.; Hari, Durga Prasad; Borin, Pierre-Antoine; Chauvier, Clément; Waser, Jérôme (2014). Fast and Highly Chemoselective Alkynylation of Thiols with Hypervalent Iodine Reagents Enabled through a Low Energy Barrier Concerted Mechanism. Journal of the American Chemical Society, 136(47), pp. 16563-16573. American Chemical Society (ACS) 10.1021/ja5083014
Lehmann, Martin; Froidevaux, J.; Pichelin, Frédéric (2014). Structural light weight construction panel based on beech wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148
Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735
Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.
Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Strahm, Thomas; Niemz, Peter (2018). Improvement of ash (Fraxinus excelsior L.) bonding quality with one-component polyurethane adhesive and hydrophilic primer for load-bearing application. International Journal of Adhesion and Adhesives, 85, pp. 303-307. Elsevier 10.1016/J.IJADHADH.2018.06.017
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Niemz, Peter (2018). Improvement of ash (Fraxinus Excelsior L.) bonding quality with one component polyuerethane adhesive and a primer for glued laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Dietsch, Philipp; Franke, Steffen; Franke, Bettina; Gamper, Andreas; Winter, Stefan (2014). Methods to determine wood moisture content and their applicability in monitoring concepts. Journal of Civil Structural Health Monitoring, 5(2), pp. 115-127. Springer 10.1007/s13349-014-0082-7
Rist, Armin; Stolz, Martin; Heintzmann, P.; Tigges, F.; Gander, C. (2015). Machbarkeitsstudie zur Reduktion von Feinstaub oder seiner Vorläufergase mittels spezieller Strassenbeläge Schweizerischer Verband der Strassen- und Verkehrsfachleute
Ganne-Chédeville, Christelle (2019). Observer et imiter la nature spirit biel/bienne, 2, p. 19.
Tellnes, Lars GF; Ganne-Chédeville, Christelle; Dias, Ana; Dolezal, Franz; Hill, Callum; Zea Escamilla, Edwin (2017). Comparative assessment for biogenic carbon accounting methods in carbon footprint of products : a review study for construction materials based on forest products. iForest : Biogeosciences and Forestry, 10(5), pp. 815-823. Italian Society of Silviculture and Forest Ecology 10.3832/ifor2386-010
Ding, T.; Bianchi, Sauro; Ganne-Chédeville, Christelle; Kilpeläinen, P.; Haapala, A.; Räty, T. (2017). Life cycle assessment of tannin extraction from spruce bark. iForest: Biogeosciences and Forestry, 10(5), pp. 807-814. 10.3832/ifor2342-010
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
Ganne-Chédeville, Christelle (2017). Woodenboxspring - sommeil en harmonie avec la nature spirit biel/bienne, 1, pp. 8-9.
Ganne-Chédeville, Christelle; Diederichs, Stefan (2015). Potential Environmental Benefits of Ultralight Particleboards with Biobased Foam Cores International Journal of Polymer Science, 2015, pp. 1-14. Hindawi 10.1155/2015/383279
Campiche, Sophie; Ganne-Chédeville, Christelle; Volkmer, Thomas; Grand, Emilie; Werner, Inge; Ferrari, Benoit J.-D. (2015). Current knowledge and evaluation of potential toxicity for soil organisms Lausanne: Centre Ecotox
Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4
Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148
Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard; Lehmann, Martin (2012). Measures for the maintenance of untreated wood facades In: World Conference on Timber Engineering (WCTE 2012). Auckland, New Zealand. 15-19.07.2012.
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839
Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.
Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).
Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard (2010). Nachhaltige Reinigung von unbehandelten Holzfassaden – Ergebnisse aus laufenden Forschungsprojekten In: 42. SAH Fortbildungskurs. SAH
Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2010). Reinigung von unbehandelten Holzfassaden Holzbaumarktschweiz : Fachmagazin für Holzbau, Architektur, Innenausbau, Produktion, 5, pp. 12-14.
Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.
Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.
Ganne-Chédeville, Christelle (2009). Schweißen von Holz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 1-6). Biberach, Deutschland: Institut für Holzbau, Hochschule Biberach
Ganne-Chédeville, Christelle (2008). Wood welding by linear friction: investigations and understanding of the physical and chemical modifications and development of an innovative technology. (Dissertation, Université Henri Poincaré - Nancy I)
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939
Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020
Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9
Ganne-Chédeville, Christelle; Pichelin, Frédéric (2007). Holzschweißen : Holz verbinden, schnell und ohne Leim Holz-Zentralblatt(40), pp. 1109-1110.
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Boonstra, M.; Pizzi, A.; Ganne-Chédeville, Christelle; Properzi, M.; Leban, J. M.; Pichelin, Frédéric (2006). Vibration welding of heat-treated wood Journal of Adhesion Science and Technology, 20(4), pp. 359-369. 10.1163/156856106776381758
Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068
Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4
Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037
Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6
Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH
Garcia, C.M.; San Pablo, M.R.; Bianchi, Sauro; Pichelin, Frédéric (2018). Resistance of fibreboards made of milled coconut husk and bonded with tannin against insects and fungi under Philippine conditions. International Wood Products Journal, 9(3), pp. 99-107. Taylor & Francis 10.1080/20426445.2018.1432169
Garcia, Carlos M.; San Pablo, Marciana R.; Bianchi, Sauro; Pichelin, Frédéric (2018). Evaluation of cocoboard resistance against Philippine termites In: 12th Conference of the Pacific Rim Termite Research Group. Yogyakarta, Indonesia. 21.-22.04.2018.
Geyer, Christoph; Müller, Andreas; Oesterlee, Cornelius; Melián Hernandez, Amabel; Gariglio, F. (2016). Reduzierung der Wärmebrücken von Tiefgaragendecken durch thermische Trennung mit Stahlbetonelementen aus Hochleistungsbeton In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Gariglio, Federico (2018). Bestimmen, vergleichen, umrechnen : Vor-Ort-Methoden zum Messen des Wasseraufnahmekoeffizienten von Außenputzen B+B Bauen im Bestand, 7, pp. 46-51. Rudolf Müller
Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M. I.; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2015). Distribution of Silica-Coated Silver/Gold Nanostars in Soft- and Hardwood Applying SERS-Based Imaging Langmuir, 32(1), pp. 274-283. American Chemical Society (ACS) 10.1021/acs.langmuir.5b03617
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.
Geiser, Martin (2018). Neue Lösungen für den Holzbau. Erdbeben und Qualitätssicherung In: S-Win-Tagung 2018, Von der Forschung zur Praxis. Biel/Bienne, Switzerland. 16.05.2018.
Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305
Grosse, Charlotte; Noël, Marion; Rautkari, Lauri; Gerardin, Philippe (2017). Influence of hygro-thermal treatment temperature and duration on dimensional stabilisation of wood modified with poly (butylene succinate) In: Scientific Conference on Wood Protection. Ghent, Belgium. 04.-08.06.2017.
Grosse, Charlotte; Thévenon, Marie France; Noël, Marion; Gerardin, Philippe (2016). Optimising wood chemical modification with lactic acid oligomers by screening of processing conditions and chemical additives In: 47th IRG Annual Meeting. Lisbon, Portugal. 15.-19.05.2016.
Gereke, Thomas; Hering, Stefan; Niemz, Peter (2016). Finite element analysis of wood adhesive joints Pro Ligno, 12(1), pp. 3-14. Fundatia PRO Ligno
Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1
Doerfel, Marion; Sinclair, M.; Zyryanov, V.; Gerlach, J. (2015). Education, science and practice: international student workshops focus on successful infrastructure solutions to improve VRUs' safety In: Internationale Konferenz. Seoul, Southkorea. 01.11.2015.
Geyer, Christoph; Wehle, Barbara; Müller, Andreas (5 April 2019). Monitoring of water contents and temperatures of historical Walls with interior Insulation in Switzerland In: International WTA - PRECOM³OS symposium. Leuven, Belgium.
Wehle, Barbara; Geyer, Christoph; Melian Hernandez, Amabel (12 March 2019). Schall- und Luftdichthe¡t von Fenstern in der Renovation In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 377-388). Biel: FORUM HOLZBAU
Geyer, Christoph; Wehle, Barbara; Melian Hernandez, Amabel (12 March 2019). Ein neues Verfahren zur Berechnung der dynamischen Wärmekapazität von Holzbalkendecken In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 151-160). Biel: FORUM HOLZBAU
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (22 January 2019). Feuchteschutz sanierter Bestandswände mit Innendämmung Vergleich von Prognoseberechnung und Messung der Feuchtegehalte und Temperaturprofile In: Kolloquium Erhaltung von Bauwerken. Ostfildern, Deutschland. 22.-23.01.2019.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Gariglio, Federico (2018). Bestimmen, vergleichen, umrechnen : Vor-Ort-Methoden zum Messen des Wasseraufnahmekoeffizienten von Außenputzen B+B Bauen im Bestand, 7, pp. 46-51. Rudolf Müller
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Melian Hernandez, Amabel (2018). In situ measurement results for air permeability and sound insulation of historical windows In: 14th Conference on Advanced Building Skins. Bern, Switzerland. 01.-02.10.2018.
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2018). Beurteilung der Feuchteproduktion durch Klimamessungen in natürlich belüfteten Wohnräumen In: Fouad, Nabil A. (ed.) Bauphysik Kalender 2018: Feuchteschutz und Bauwerksabdichtung (pp. 191-224). Berlin, Deutschland: Wilhelm Ernst & Sohn
Geyer, Christoph (2018). Schallschutz im Holzbau am Beispiel von Hohlkastendecken In: Detmolder Bauphysiktag 2018. Detmold, Germany. 15.02.2018.
Geyer, Christoph; Schlegel, Stefan; Harder, Ralf (2017). Bauphysiker legen beim Schallschutz den Finger auf die wunde Stelle Schweizer Holzrevue(10/11), pp. 2-5.
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2017). Auswertung von Raumklimamessungen und Bestimmung typischer Taupunkttemperaturen in natürlich belüfteten Wohnzimmern. Bauphysik, 39(3), pp. 151-158. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.20170020
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (2017). Messung der Wasseraufnahme historischer Putze. Vergleich verschiedener In-situ-Messerverfahren mit Labormessmethoden. Bauphysik, 39(4), pp. 245-252. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.20170025
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Greiner, Martin; Urech, P. (2017). Evaluation of in-situ measurement methods for air permeability of windows In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (2017). Was leisten In-situ-Messmethoden der Wasseraufnahmekoeffizienten von Aussenputzen historischer Gebäude? In: 28. Hanseatische Sanierungstage. Heringsdorf, Deutschland. 02.-04.11.2017.
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2017). Bemessung des Wärmeschutzes der Gebäudehülle auf der Grundlage von Raumklimamessungen In: Fouad, Nabil A. (ed.) Bauphysik Kalender 2017: Gebäudehülle und Fassaden 17 (pp. 577-601). Weinheim: John Wiley & Sons, Inc. 10.1002/9783433607794.ch17
Geyer, Christoph; Müller, Andreas; Oesterlee, Cornelius; Melián Hernandez, Amabel; Gariglio, F. (2016). Reduzierung der Wärmebrücken von Tiefgaragendecken durch thermische Trennung mit Stahlbetonelementen aus Hochleistungsbeton In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2015). Beurteilung von Klimamessungen in natürlich belüfteten Gebäuden In: Bauphysiktage Kaiserslautern 2015. Kaiserslautern, Germany. 21.-22.10.2015.
Wehle, Barbara; Geyer, Christoph (2014). Alte Fenster nicht einfach nur austauschen Glaswelt, 3, pp. 84-87. Gentner
Hernández, Amabel Melián; Geyer, Christoph; Müller, Andreas; Sanavi, Ali (2014). Acoustic sound insulation measurements for the direct and flanking transmission of typical Swiss timber constructions Acoustics in practice, 2(2), pp. 21-28. European Acoustics Association
Geyer, Christoph; Müller, Andreas (2014). Analysis of the influence of the construction elements on direct sound insulation of a timber floor with gravel weight load In: Forum Acusticum. Krakau, Poland. 09.-12.09.2014.
Melián Hernández, Amabel; Geyer, Christoph; Müller, Andreas; Sanavi, A.; Pichler, J. (2014). Direct and flanking airborne and impact sound insulation of different Swiss timber floor and wall constructions. In: Forum Acusticum. Krakau, Poland. 09.-12.09.2014.
Wehle, Barbara; Geyer, Christoph (2014). Den Schutz verbessern, die Schönheit bewahren Bauen im Bestand B + B, 37(3), pp. 58-61.
Wehle, Barbara; Geyer, Christoph (2014). Energetische und schalltechnische Sanierung von Wohngebäuden der 1950er bis 1970er Jahre In: 18. Status-Seminar «Forschen für den Bau im Kontext von Energie und Umwelt». Zürich, Switzerland. 04.-05.09.2014.
JP (2006). Unfolding anchor (JP2006153277 (A))
Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.
Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648
Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa
Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.
Wieland, Stefanie; Properzi, Milena; Pichelin, Frédéric; Gfeller, Balz (2005). Einsatz des linearen Vibrationsschweissens in der Holzindustrie In: Frauenhofer WKI Workshop: Klebstoffe für Holzprodukte. Braunschweig, Germany. 10-11 Nov 2005.
Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))
Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007
Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.
Ghazi Wakili, Karim; Stöckli, Thomas (4 September 2019). Slim building envelopes using vacuum glazing and high-performance insulation Journal of Physics: Conference Series, 1343, 012193. 10.1088/1742-6596/1343/1/012193
Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)
Hausammann, Roman; Franke, Steffen; Schiere, Marcus Jacob; Giordano, Nicolàs (2016). Development of a long span self-supporting compact façade system for industrial buildings In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2
Zürcher, Ernst; Schlaepfer, R.; Giudici, F. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste
Zürcher, Ernst; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Sonderegger, Walter; Glaunsinger, Martin; Mannes, David; Volkmer, Thomas; Niemz, Peter (2015). Investigations into the influence of two different wood coatings on water diffusion determined by means of neutron imaging European Journal of Wood and Wood Products, 73(6), pp. 793-799. Springer 10.1007/s00107-015-0951-8
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter; Sonderegger, Walter (2015). Investigations on water vapour permeability of wood coatings for exterior use. Bauphysik, 37(3), pp. 186-195. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201510020
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter (2014). Investigations on the influence of moisture on the adhesion strength of surface coating of wood Bauphysik, 36(6), pp. 337-342. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410041
Bianchi, Sauro; Gloess, Alexia N.; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric (2014). Analysis of the structure of condensed tannins in water extracts from bark tissues of Norway spruce (Picea abies [Karst.]) and Silver fir (Abies alba [Mill.]) using MALDI-TOF mass spectrometry. Industrial Crops and Products, 61, pp. 430-437. Elsevier 10.1016/j.indcrop.2014.07.038
Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press
Thömen, Heiko; Gonin, Marc-André (2010). European master programs in wood science and technology In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-7). United Nations Economic Commission for Europe – Timber Committee
JP (2006). Unfolding anchor (JP2006153277 (A))
Bachmann, Eduard; Sigrist, Christophe (2014). Complex timber structures In: Gramazio, F.; Kohler, M.; Willmann, J. (eds.) The robotic touch: how robots change architecture (pp. 364-377). Zürich: Park Books
Willmann, Jan; Knauss, Michael; Bonwetsch, Tobias; Apolinarska, Anna Aleksandra; Gramazio, Fabio; Kohler, Matthias (2016). Robotic timber construction : Expanding additive fabrication to new dimensions Automation in construction, 2016(61), pp. 16-23.
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Campiche, Sophie; Ganne-Chédeville, Christelle; Volkmer, Thomas; Grand, Emilie; Werner, Inge; Ferrari, Benoit J.-D. (2015). Current knowledge and evaluation of potential toxicity for soil organisms Lausanne: Centre Ecotox
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Greiner, Martin; Urech, P. (2017). Evaluation of in-situ measurement methods for air permeability of windows In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Noël, Marion; Grigsby, W.; Vitkeviciute, I.; Volkmer, Thomas (2015). Modifying wood with bio-polyesters: analysis and performance International Wood Products Journal, 6(1), pp. 14-20. Taylor & Francis 10.1179/2042645314Y.0000000086
Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757
Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679
Noël, Marion; Grigsby, Warren; Volkmer, Thomas (2014). Investigating the Viscoelastic Properties and Mechanical Performance of Wood Modifi ed by Biopolyester Treatments. Journal of Renewable Materials, 2(4), pp. 291-305. Scrivener Publishing 10.7569/JRM.2014.634118
Noël, Marion; Grigsby, Warren J.; Volkmer, Thomas (2015). Evaluating The Extent of Bio-Polyester Polymerization in Solid Wood by Thermogravimetric Analysis Journal of Wood Chemistry and Technology, 35(5), pp. 325-336. Taylor & Francis 10.1080/02773813.2014.962154
Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735
Grosse, C.; Noël, Marion; Thevenon, M.; Gérardin, P. (2018). FTIR-ATR monitoring of chemical changes of thermo-chemically modified beech wood degraded by brown-rot fungus In: IRG49 - International Research Group on Wood Protection. Johannesburg, South Africa. 29.04-03.05.2018.
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035
Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Noël, Marion; Grosse, Charlotte; Burud, I.; Gérardin, Philippe (2018). Biopolyesters for wood modification : technical validation towards implementation In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Rautkari, Lauri; Gérardin, Philippe (2017). Influence of Water and Humidity on Wood Modification with Lactic Acid Journal of Renewable Materials, 6(3), pp. 259-269. Scrivener Publishing
Grosse, Charlotte; Noël, Marion; Rautkari, Lauri; Gerardin, Philippe (2017). Influence of hygro-thermal treatment temperature and duration on dimensional stabilisation of wood modified with poly (butylene succinate) In: Scientific Conference on Wood Protection. Ghent, Belgium. 04.-08.06.2017.
Grosse, Charlotte; Thévenon, Marie France; Noël, Marion; Gerardin, Philippe (2016). Optimising wood chemical modification with lactic acid oligomers by screening of processing conditions and chemical additives In: 47th IRG Annual Meeting. Lisbon, Portugal. 15.-19.05.2016.
Franke, Steffen; Gruetter, D. (2016). Development of a quality management plan for timber bridges In: TU1406. Belgrad, SRB. 30.03.-01.04.2016.
Roduner, A.; Flum, D.; Stolz, Martin; Gröner, E. (2015). Large-scale field tests with flexible slope stabilization systems In: XVI European conference on soil mechanics and geotechnical engineering. Edinburgh, Scotland. 13.-17.09.2015.
Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Volkmer, Thomas; Gyr, R.; Kaiser, P. (2017). Methoden der Holzmodifikation zur Verbesserung der Dauerhaftigkeit und des Brandschutzes In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient, geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.
Grosse, C.; Noël, Marion; Thevenon, M.; Gérardin, P. (2018). FTIR-ATR monitoring of chemical changes of thermo-chemically modified beech wood degraded by brown-rot fungus In: IRG49 - International Research Group on Wood Protection. Johannesburg, South Africa. 29.04-03.05.2018.
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035
Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Noël, Marion; Grosse, Charlotte; Burud, I.; Gérardin, Philippe (2018). Biopolyesters for wood modification : technical validation towards implementation In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Rautkari, Lauri; Gérardin, Philippe (2017). Influence of Water and Humidity on Wood Modification with Lactic Acid Journal of Renewable Materials, 6(3), pp. 259-269. Scrivener Publishing
Güntekin, Ergün; Aydın, Tuğba Yılmaz; Niemz, Peter (2015). Prediction of compression properties in three orthotropic directions for some important Turkish wood species using ultrasound BioResources, 10(4), pp. 7252-7262.
Ding, T.; Bianchi, Sauro; Ganne-Chédeville, Christelle; Kilpeläinen, P.; Haapala, A.; Räty, T. (2017). Life cycle assessment of tannin extraction from spruce bark. iForest: Biogeosciences and Forestry, 10(5), pp. 807-814. 10.3832/ifor2342-010
Kliger, Robert; Haghani, Reza; Brunner, Maurice Yaw; Harte, Annette M.; Schober, Kay-Uwe (2016). Wood-based beams strengthened with FRP laminates: improved performance with pre-stressed systems European Journal of Wood and Wood Products, 74(3), pp. 319-330. Springer 10.1007/s00107-015-0970-5
Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4
Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832
Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.
Geyer, Christoph; Schlegel, Stefan; Harder, Ralf (2017). Bauphysiker legen beim Schallschutz den Finger auf die wunde Stelle Schweizer Holzrevue(10/11), pp. 2-5.
Frei, Reto; Wodrich, Matthew D.; Hari, Durga Prasad; Borin, Pierre-Antoine; Chauvier, Clément; Waser, Jérôme (2014). Fast and Highly Chemoselective Alkynylation of Thiols with Hypervalent Iodine Reagents Enabled through a Low Energy Barrier Concerted Mechanism. Journal of the American Chemical Society, 136(47), pp. 16563-16573. American Chemical Society (ACS) 10.1021/ja5083014
Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Franke, Steffen; Franke, Bettina; Harte, A. (2015). Failure modes and reinforcement techniques for timber beams - State of the art Construction and Building Materials, 97, pp. 2-13. 10.1016/j.conbuildmat.2015.06.021
Franke, Steffen; Franke, Bettina; Harte, Annette (2015). Reinforcement of timber beams In: Harte, Annette; Dietsch, Philipp (eds.) Reinforcement of Timber Struchtures, A state of the art report (pp. 5-24). Aachen: Shaker Verlag
Franke, Steffen; Franke, Bettina; Harte, Annette (2015). Reinforcement of timber beams In: Harte, Annette; Dietsch, Philipp (eds.) Reinforcement of Timber Struchtures, A state of the art report (pp. 5-24). Aachen: Shaker Verlag
Kliger, Robert; Haghani, Reza; Brunner, Maurice Yaw; Harte, Annette M.; Schober, Kay-Uwe (2016). Wood-based beams strengthened with FRP laminates: improved performance with pre-stressed systems European Journal of Wood and Wood Products, 74(3), pp. 319-330. Springer 10.1007/s00107-015-0970-5
Volkmer, Thomas; Lorenz, T.; Hass, P.; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the mechanical and physical properties of common oak wood. European Journal of Wood and Wood Products, 72(2), pp. 249-259. Springer 10.1007/s00107-014-0777-9
Volkmer, Thomas; von Arx, Urs; Moser, Regula; Hass, Philipp; Lorenz, Thomas; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the optical appearance and the emission behaviour of oak wood Bauphysik, 36(2), pp. 80-86. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410021
Franke, Steffen; Hausammann, Roman; Schiere, Marcus Jacob (October 2016). Development of a span wood based self-supported compact façade system for non-residential buildings In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Hausammann, Roman; Franke, Steffen; Schiere, Marcus Jacob; Giordano, Nicolàs (2016). Development of a long span self-supporting compact façade system for industrial buildings In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Hausammann, Roman; Franke, Steffen (2014). A Modular Timber Construction System of Hollow-Box Elements In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Hebel, Dirk E.; Heisel, Felix; Javadian, Alireza; Müller, Philipp; Lee, Simon; Aigner, Nikita; Schlesier, Karsten (2017). Construction with engineered bamboo In: Cultivated building materials: industrialized natural resources for architecture and construction (pp. 32-39). Basel: De Gruyter
Rist, Armin; Stolz, Martin; Heintzmann, P.; Tigges, F.; Gander, C. (2015). Machbarkeitsstudie zur Reduktion von Feinstaub oder seiner Vorläufergase mittels spezieller Strassenbeläge Schweizerischer Verband der Strassen- und Verkehrsfachleute
Heintzmann, Philipp; Stolz, Martin (June 2019). Lawinenverbauungen, die auch vor Steinschlag schützen spirit biel/bienne, 2019(2), pp. 24-25. Berner Fachhochschule BFH
Rentsch Partner AG (2018). Stützwerk zum Schutz vor Lawinen, Steinschlägen und Erdrutschen (00547/18)
Hebel, Dirk E.; Heisel, Felix; Javadian, Alireza; Müller, Philipp; Lee, Simon; Aigner, Nikita; Schlesier, Karsten (2017). Construction with engineered bamboo In: Cultivated building materials: industrialized natural resources for architecture and construction (pp. 32-39). Basel: De Gruyter
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Bachtiar, E. V.; Rüggeberg, M.; Hering, S.; Kaliske, M.; Niemz, Peter (2017). Estimating shear properties of walnut wood: a combined experimental and theoretical approach. Materials and Structures, 50(6), pp. 1-15. Springer 10.1617/s11527-017-1119-2
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2017). The orthotropic behaviour of the physical‐mechanical properties of European beech wood Bautechnik, 92(1), pp. 174-183. Wiley-Blackwell - STM 10.1002/bate.201400079
Gereke, Thomas; Hering, Stefan; Niemz, Peter (2016). Finite element analysis of wood adhesive joints Pro Ligno, 12(1), pp. 3-14. Fundatia PRO Ligno
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions Pro Ligno, 11(4), pp. 37-42. Fundatia PRO Ligno
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: Proceedings of the IAWPS 2015. Tokyo, Japan. 15.-17.03.2015.
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: International Conference "Wood Science and Engineering in the Third Millennium" - ICWSE 2015. Brasov, Romania. 05.-07.11.2015.
Hernández, Amabel Melián; Geyer, Christoph; Müller, Andreas; Sanavi, Ali (2014). Acoustic sound insulation measurements for the direct and flanking transmission of typical Swiss timber constructions Acoustics in practice, 2(2), pp. 21-28. European Acoustics Association
Franke, Steffen; Franke, Bettina; Müller, Andreas; Heubuch, Sebastian Pascal (4 December 2019). Stabdübelverbindungen und eingeklebte Gewindestangen in Buchen-BSH In: 25. Internationales Holzbau-Forum (IHF 2019). Congress Innsbruck Österreich. 4. - 6.12.2019.
Heubuch, Sebastian Pascal; Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Eingeklebte Gewindestangen in Buchen BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Heubuch, Sebastian Pascal; Franke, Bettina (2018). Glued-in rods in beech hardwood - investing of predrilling diameter and pull-out resistance In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004
Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
Tellnes, Lars GF; Ganne-Chédeville, Christelle; Dias, Ana; Dolezal, Franz; Hill, Callum; Zea Escamilla, Edwin (2017). Comparative assessment for biogenic carbon accounting methods in carbon footprint of products : a review study for construction materials based on forest products. iForest : Biogeosciences and Forestry, 10(5), pp. 815-823. Italian Society of Silviculture and Forest Ecology 10.3832/ifor2386-010
Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679
Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Mayer, Ingo; Hinterleitner, Christina (2018). Décontaminer les biens culturels spirit biel/bienne, 1, pp. 18-19.
Hofer, Stephan; Rudin, Beat; Uehlinger, Urs (2017). System to certify windows/doors with burglary-resistant characteristics In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2018). Beurteilung der Feuchteproduktion durch Klimamessungen in natürlich belüfteten Wohnräumen In: Fouad, Nabil A. (ed.) Bauphysik Kalender 2018: Feuchteschutz und Bauwerksabdichtung (pp. 191-224). Berlin, Deutschland: Wilhelm Ernst & Sohn
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2017). Auswertung von Raumklimamessungen und Bestimmung typischer Taupunkttemperaturen in natürlich belüfteten Wohnzimmern. Bauphysik, 39(3), pp. 151-158. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.20170020
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2017). Bemessung des Wärmeschutzes der Gebäudehülle auf der Grundlage von Raumklimamessungen In: Fouad, Nabil A. (ed.) Bauphysik Kalender 2017: Gebäudehülle und Fassaden 17 (pp. 577-601). Weinheim: John Wiley & Sons, Inc. 10.1002/9783433607794.ch17
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2015). Beurteilung von Klimamessungen in natürlich belüfteten Gebäuden In: Bauphysiktage Kaiserslautern 2015. Kaiserslautern, Germany. 21.-22.10.2015.
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)
Thömen, Heiko; Homerin, Benoit (2017). Modernste Prozessleittechnik - Integration eines mathematisch-physikalischen Modells in ein industrielles Prozessleitsystem In: 12. Holzwerkstoffkolloquium. Dresden, Germany. 14.-15.12.2017.
Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.
Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.
Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0
Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.
Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.
Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.
Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.
Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.
Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1
Hurst, Andreas (2008). Holzhausbau in anderen Klimaregionen In: 40. Fortbildungskurs der Schweizerische Arbeitsgemeinschaft für Holzforschung (pp. 255-264). Zürich: SAH
Huwiler, Ursin; Rehm, Klaus (2018). Real-time control of powder coating In: PRA's 11th International Woodcoatings Congress. Amsterdam, The Netherlands. 23.-24.10.2018.
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839
Rehm, Klaus (2018). Verfahren zur Pulverbeschichtung In: Hänsel, Andreas; Prieto, Jorge (eds.) Industrielle Beschichtung von Holz und Holzwerkstoffen im Möbelbau (pp. 264-271). München: Cark Hanser Verlag
Volkmer, Thomas; Höltschi, Christoph (2009). Holzfassaden verändern ihre Farbe Applica : Die Zeitschrift für das Maler- und Gipsergewerbe, 5, pp. 12-16. Schweizerischer Maler- und Gipserunternehmer-Verband ; Schweizerischer Maler- und Gipsermeister-Verband
Volkmer, Thomas; Höltschi, Christoph (2009). Zahn der Zeit Immobilia : Zeitschrift für die Immobilienwirtschaft(6), pp. 37-38. SVIT Verlag AG
Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press
Stolz, Martin; Schlüchter, C.; Akçar, N.; Ivy-Ochs, S. (2015). Relevance of Quaternary alpine paleoglaciations for present day geoengineering projects (Unpublished). In: XIX INQUA Congress. Nagoya, Japan. 26.07.-02.08.2015.
Nyffenegger, Franziska; Yavuz, V.; Akçar, N.; Ivy-Ochs, S.; Fredin, O.; Schlunegger, F. (2015). Rearward landsliding in sensitive clays: February 2011 massive failures at the Cöllolar coalfields, eastern Turkey (Unpublished). In: 13th Swiss Geoscience Meeting. Basel. 20.-21.11.2015.
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Bianchi, Sauro; Koch, Gerald; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2016). Hot water extraction of Norway spruce (Picea abies [Karst.]) bark: analyses of the influence of bark aging and process parameters on the extract composition. Holzforschung, 70(7), pp. 619-631. De Gruyter 10.1515/hf-2015-0160
Bianchi, Sauro; Kroslakova, Ivana; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2015). Characterization of condensed tannins and carbohydrates in hot water bark extracts of European softwood species Phytochemistry, 120, pp. 53-61. Elsevier 10.1016/j.phytochem.2015.10.006
Hebel, Dirk E.; Heisel, Felix; Javadian, Alireza; Müller, Philipp; Lee, Simon; Aigner, Nikita; Schlesier, Karsten (2017). Construction with engineered bamboo In: Cultivated building materials: industrialized natural resources for architecture and construction (pp. 32-39). Basel: De Gruyter
Jiang, J.; Bachtiar, E. V.; Lu, J.; Niemz, Peter (2017). Moisture-dependent orthotropic elasticity and strength properties of Chinese fir wood European Journal of Wood and Wood Products, 75(6), pp. 927-938. Springer 10.1007/s00107-017-1166-y
Mgbemene, Chigbo; Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Kimeng, Henry; Mustapha, Sani; Nduka, Okey (2014). Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive. Journal of Architectural Engineering, 20(1), 04013006-1. 10.1061/(ASCE)AE.1943-5568.0000135
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press
Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003
Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008
Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Ammann, Samuel; Schlegel, Sven; Beyer, Mario; Aehlig, Karsten; Lehmann, Martin; Jung, Heiko; Niemz, Peter (2016). Quality assessment of glued ash wood for construction engineering. European Journal of Wood and Wood Products, 74(1), pp. 67-74. Springer 10.1007/s00107-015-0981-2
Bianchi, Sauro; Thömen, Heiko; Junginger, S.; Pichelin, Frédéric (2019). Medium density boards made of groundwood fibres: an analysis of their mechanical and physical properties European Journal of Wood and Wood Products, 77(1), pp. 71-77. Springer 10.1007/s00107-018-1367-z
Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148
Schnell, Dieter (2016). "Zurückweisung jeder Ansprüche auf Luxus und eiteln Aufwand…" Bauen in Bern um 1815.. In: Kaestli, Tobias (ed.) Nach Napoleon. Die Restauration, der Wiener Kongress und die Zukunft der Schweiz 1813-1815. Archiv des Historischen Vereins des Kantons Bern AHVB Band 91. 2 (pp. 235-252). Baden: Hier und Jetzt
Volkmer, Thomas; Gyr, R.; Kaiser, P. (2017). Methoden der Holzmodifikation zur Verbesserung der Dauerhaftigkeit und des Brandschutzes In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient, geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.
Bachtiar, E. V.; Rüggeberg, M.; Hering, S.; Kaliske, M.; Niemz, Peter (2017). Estimating shear properties of walnut wood: a combined experimental and theoretical approach. Materials and Structures, 50(6), pp. 1-15. Springer 10.1617/s11527-017-1119-2
Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104
Bachtiar, Erik V.; Clerc, Gaspard; Brunner, Andreas J.; Kaliske, Michael; Niemz, Peter (2017). Static and dynamic tensile shear test of glued lap wooden joint with four different types of adhesives. Holzforschung, 71(5), pp. 391-396. De Gruyter 10.1515/hf-2016-0154
Konopka, Daniel; Bachtiar, Erik V.; Niemz, Peter; Kaliske, Michael (2017). Experimental and numerical analysis of moisture transport in walnut and cherry wood in radial and tangential material directions. BioResources, 12(4), pp. 8920-8936. North Carolina State University
Rehm, Klaus; Nühse, Jan Hendrik; Letsch, Bernhard; Dreier, Raphael; Kalt, Raphael (2016). Pulverbeschichtung von Holzwerkstoffen : Neue Lacke und Technologien Holztechnologie, 57(1), pp. 17-22.
Rehm, Klaus; Letsch, Bernhard; Kalt, Raphael; Emmenegger, Florian (2014). Beschichtungsprozesse im Vergleich - Prozessbetrachtung und Kostenvergleich In: 1. MDF Pulversymposium 2014. Markdorf, Germany. 26.-27.11.2014.
Donzé, Marc; Kammer, D.; Uehlinger, Urs (2015). Optimal characteristics and dimensions of glazing components in building skins In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444
Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.
Farajzadeh Moshtaghin, A.; Franke, Steffen; Keller, T.; Vassilopoulos, A. (June 2016). Quantification of spatial variability for transverse elastic modulus of spruce wood In: ECCOMAS Congress 2016. Kreta, Griechenland. 05.-10.06.2016.
Moshtaghin, Alireza F.; Franke, Steffen; Keller, Thomas; Vassilopoulos, Anastasios P. (2016). Random field-based modeling of size effect on the longitudinal tensile strength of clear timber Structural Safety, 58, pp. 60-68.
Moshtaghin, Alireza Farajzadeh; Franke, Steffen; Keller, Thomas; Vassilopoulos, Anastasios P. (May 2015). Spatial variability in longitudinal elastic modulus of clear timber In: EUROMECH-Colloquium 556 on Wood Mechanics. Dresden, Germany. 27-29.05.2015.
Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.
Khojasteh-Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products European Journal of Wood and Wood Products, 78(3), pp. 593-603. Springer 10.1007/s00107-020-01519-8
Ding, T.; Bianchi, Sauro; Ganne-Chédeville, Christelle; Kilpeläinen, P.; Haapala, A.; Räty, T. (2017). Life cycle assessment of tannin extraction from spruce bark. iForest: Biogeosciences and Forestry, 10(5), pp. 807-814. 10.3832/ifor2342-010
Mgbemene, Chigbo; Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Kimeng, Henry; Mustapha, Sani; Nduka, Okey (2014). Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive. Journal of Architectural Engineering, 20(1), 04013006-1. 10.1061/(ASCE)AE.1943-5568.0000135
Rehm, Christiane; Sukumaran, S. P.; Kisselbach, A.; Scholz, F. (2017). Investigation of machinability of klein dried oil palm wood with regard to production of solid wood products In: 23rd International Wood Machining Seminar. Warsaw, Poland. 28.-31.05.2017.
Sukumaran, Sunil P.; Kisselbach, Andreas; Scholz, Frieder; Rehm, Christiane (2018). Investigation of machinability of kiln dried oil palm wood with regard to production of solid wood products Holztechnologie, 59(3), pp. 19-31.
Kliger, Robert; Haghani, Reza; Brunner, Maurice Yaw; Harte, Annette M.; Schober, Kay-Uwe (2016). Wood-based beams strengthened with FRP laminates: improved performance with pre-stressed systems European Journal of Wood and Wood Products, 74(3), pp. 319-330. Springer 10.1007/s00107-015-0970-5
Willmann, Jan; Knauss, Michael; Bonwetsch, Tobias; Apolinarska, Anna Aleksandra; Gramazio, Fabio; Kohler, Matthias (2016). Robotic timber construction : Expanding additive fabrication to new dimensions Automation in construction, 2016(61), pp. 16-23.
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.
Bianchi, Sauro; Koch, Gerald; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2016). Hot water extraction of Norway spruce (Picea abies [Karst.]) bark: analyses of the influence of bark aging and process parameters on the extract composition. Holzforschung, 70(7), pp. 619-631. De Gruyter 10.1515/hf-2015-0160
Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.
Bachmann, Eduard; Sigrist, Christophe (2014). Complex timber structures In: Gramazio, F.; Kohler, M.; Willmann, J. (eds.) The robotic touch: how robots change architecture (pp. 364-377). Zürich: Park Books
Willmann, Jan; Knauss, Michael; Bonwetsch, Tobias; Apolinarska, Anna Aleksandra; Gramazio, Fabio; Kohler, Matthias (2016). Robotic timber construction : Expanding additive fabrication to new dimensions Automation in construction, 2016(61), pp. 16-23.
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Kolb, Hanspeter; Beetschen, Mirko (2019). Vielfalt im Holzbau Die schönsten Seiten des Kantons Bern: Vol. 26. Bern: Stämpfli Verlag AG
Kolb, Hanspeter; Volkmer, Thomas (2019). Pour du bois résistant mieux au feu et à la lumière spirit biel/bienne, 2, pp. 8-9.
Kolb, Hanspeter (2018). Holzkleid mit Risiken Wir Holzbauer(5)
Kolb, Hanspeter (2018). Holzfassaden - Eine Frage der Konstruktion In: 9. Internationaler Holz(Bau)Physik-Kongress. Leipzig, Germany. 15.-16.02.2018.
Kolb, Hanspeter (2017). Hinterlüftete und nicht hinterlüftete Aussenwandbekleidung - ein Überblick In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient, geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.
Teibinger, Martin; Kolb, Hanspeter; Winter, Stefan (2015). Ein gemeinsamer Blick über die Grenzen : Anforderungen und Detaillösungen Holzbau: Die neue Quadriga, 2, pp. 13-26. Kastner AG - das medienhaus
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104
Konopka, Daniel; Bachtiar, Erik V.; Niemz, Peter; Kaliske, Michael (2017). Experimental and numerical analysis of moisture transport in walnut and cherry wood in radial and tangential material directions. BioResources, 12(4), pp. 8920-8936. North Carolina State University
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2018). Beurteilung der Feuchteproduktion durch Klimamessungen in natürlich belüfteten Wohnräumen In: Fouad, Nabil A. (ed.) Bauphysik Kalender 2018: Feuchteschutz und Bauwerksabdichtung (pp. 191-224). Berlin, Deutschland: Wilhelm Ernst & Sohn
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2017). Auswertung von Raumklimamessungen und Bestimmung typischer Taupunkttemperaturen in natürlich belüfteten Wohnzimmern. Bauphysik, 39(3), pp. 151-158. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.20170020
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2017). Bemessung des Wärmeschutzes der Gebäudehülle auf der Grundlage von Raumklimamessungen In: Fouad, Nabil A. (ed.) Bauphysik Kalender 2017: Gebäudehülle und Fassaden 17 (pp. 577-601). Weinheim: John Wiley & Sons, Inc. 10.1002/9783433607794.ch17
Hofmann, Markus; Geyer, Christoph; Kornadt, Oliver (2015). Beurteilung von Klimamessungen in natürlich belüfteten Gebäuden In: Bauphysiktage Kaiserslautern 2015. Kaiserslautern, Germany. 21.-22.10.2015.
Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759
Lehmann, Martin; Brunner, Maurice Yaw; Kraft, Sebastian (2010). Higher load bearing capabilities with elastic glue lines for glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.
Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)
Schnell, Dieter (2017). Zur Architekturkrise in Bern. In: Flückiger, G.; Krethlow, M.; Tobler, K. (eds.) Bern 70 (pp. 111-124). Bern: Edition Atelier
Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105
Bianchi, Sauro; Kroslakova, Ivana; Mayer, Ingo (2016). Determination of Molecular Structures of Condensed Tannins from Plant Tissues Using HPLC-UV Combined with Thiolysis and MALDI-TOF Mass Spectrometry. BIO-PROTOCOL, 6(20), pp. 1-14. 10.21769/BioProtoc.1975
Bianchi, Sauro; Kroslakova, Ivana; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2015). Characterization of condensed tannins and carbohydrates in hot water bark extracts of European softwood species Phytochemistry, 120, pp. 53-61. Elsevier 10.1016/j.phytochem.2015.10.006
Bianchi, Sauro; Gloess, Alexia N.; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric (2014). Analysis of the structure of condensed tannins in water extracts from bark tissues of Norway spruce (Picea abies [Karst.]) and Silver fir (Abies alba [Mill.]) using MALDI-TOF mass spectrometry. Industrial Crops and Products, 61, pp. 430-437. Elsevier 10.1016/j.indcrop.2014.07.038
Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD
Brombacher, Volker; Franco, Michel; Krug, Detlef; Torres, Marco U.; Niemz, Peter (2016). Investigations on improving wood fiber insulation boards depending on mechanical pulping conditions Bauphysik, 38(5), pp. 298-308. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201610026
Rentsch Partner AG (2018). Stützwerk zum Schutz vor Lawinen, Steinschlägen und Erdrutschen (00547/18)
Beyer, Mario; Kránitz, Katalin; Bremer, Martina; Peters, Jana; Fischer, Steffen; Bues, Claus-Thomas; Niemz, Peter (2018). Effect of natural aging on the chemical composition of norway spruce, fir, and european oak wood. Pro Ligno, 14(2), pp. 3-19. Fundatia PRO Ligno
JP (2006). Unfolding anchor (JP2006153277 (A))
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
Fitzken Da Vinci M. Niro, J.; Kyriazopoulos, Michail; Bianchi, Sauro; Mayer, Ingo; Eusebio, D.A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2016). Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives. International Wood Products Journal, 7(4), pp. 208-214. Taylor & Francis 10.1080/20426445.2016.1207039
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Schneider Feldmann AG (2018). Ankervorrichtung (00301/18)
Rädle, Wolfgang; Letsch, Bernhard; Kümmin, P.; Uehlinger, Urs; Bühlmann, Urs (2015). Thermal properties of door and window access systems In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Uehlinger, Urs; Bühlmann, Urs; Kümmin, P. (2015). An ecological solution for wooden window frame enlargements In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag
Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003
Künzi Hummel, Katrin (2014). Wandlungsfähig, leistungsstark und nachhaltig: heutige Attribute des Holzes im Spiegel der Tradition In: Rinke, Mario; Schwartz, Joseph (eds.) Holz : Stoff oder Form. Transformationen einer Konstruktionslogik (pp. 307-319). Zürich: Niggli Verlag
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839
Volkmer, Thomas; Landmesser, H. (2007). Pilze auf Holzfassaden Berner Fachhochschule Architektur, Holz und Bau
Fitzken Da Vinci M. Niro, J.; Kyriazopoulos, Michail; Bianchi, Sauro; Mayer, Ingo; Eusebio, D.A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2016). Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives. International Wood Products Journal, 7(4), pp. 208-214. Taylor & Francis 10.1080/20426445.2016.1207039
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA
Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088
Boonstra, M.; Pizzi, A.; Ganne-Chédeville, Christelle; Properzi, M.; Leban, J. M.; Pichelin, Frédéric (2006). Vibration welding of heat-treated wood Journal of Adhesion Science and Technology, 20(4), pp. 359-369. 10.1163/156856106776381758
Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8
Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310
Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020
Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6
Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).
Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068
Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4
Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004
Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001
Hebel, Dirk E.; Heisel, Felix; Javadian, Alireza; Müller, Philipp; Lee, Simon; Aigner, Nikita; Schlesier, Karsten (2017). Construction with engineered bamboo In: Cultivated building materials: industrialized natural resources for architecture and construction (pp. 32-39). Basel: De Gruyter
Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.
Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.
Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.
Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004
Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007
Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.
Lehmann, Martin (October 2019). Keilzinkung und Flächenverklebung von Buchenlamellen In: S-Win 51. Fortbildungkurs - Hochleistungswerkstoffe im Holzbau. S-Win
Ehrhart, Thomas; Lehmann, Martin; Frangi, Andrea (2019). European beech ( Fagus sylvatica L .) glued laminated timber : Lamination strength grading , production and mechanical properties In: International Scientific Conference on Hardwood Processing, ISCHP 19 (pp. 252-267). TU Delft
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Strahm, Thomas; Niemz, Peter (2018). Improvement of ash (Fraxinus excelsior L.) bonding quality with one-component polyurethane adhesive and hydrophilic primer for load-bearing application. International Journal of Adhesion and Adhesives, 85, pp. 303-307. Elsevier 10.1016/J.IJADHADH.2018.06.017
Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of cross laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20-23.08.2018.
Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of bross laminated timber In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Niemz, Peter (2018). Improvement of ash (Fraxinus Excelsior L.) bonding quality with one component polyuerethane adhesive and a primer for glued laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Lehmann, Martin; Clerc, Gaspard; Lehringer, C.; Strahm, T.; Volkmer, Thomas; ; (2018). Investigation of the bond quality and the finger joint strength of beech glulam In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Volkmer, Thomas; Lehmann, Martin; Clerc, Gaspard (2017). Brettschichtholz aus Buche: Keilzinkenverbindung und Flächenverklebung In: 23. Internationales Holzbau-Forum. Garmisch-Partenkirchen, Deutschland. 06.-08.12.2017.
Sigrist, Christophe; Lehmann, Martin (2016). Mechanical properties of glulam produced from visually graded boards. In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Ammann, Samuel; Schlegel, Sven; Beyer, Mario; Aehlig, Karsten; Lehmann, Martin; Jung, Heiko; Niemz, Peter (2016). Quality assessment of glued ash wood for construction engineering. European Journal of Wood and Wood Products, 74(1), pp. 67-74. Springer 10.1007/s00107-015-0981-2
Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Lehmann, Martin (2015). Investigations of the Loadbearing Behaviour of Timber Bending Beams Reinforced Using Prestressed CFRP-Lamellas (Unpublished). (Dissertation, Bauhaus-Universität Weimar, Fakultät Bauingenieurwesen)
Sigrist, Christophe; Lehmann, Martin (2014). Potential of CLT produced from non-structural grade Australian Pinus Radiata In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Lehmann, Martin; Froidevaux, J.; Pichelin, Frédéric (2014). Structural light weight construction panel based on beech wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Mgbemene, Chigbo; Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Kimeng, Henry; Mustapha, Sani; Nduka, Okey (2014). Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive. Journal of Architectural Engineering, 20(1), 04013006-1. 10.1061/(ASCE)AE.1943-5568.0000135
Lehmann, Martin; Volkmer, Thomas (2014). Investigation of the bond quality of hardwoods with micro structured surfaces In: 68th FPS International Convention. Quebec City, Canada. 10.-13.08.2014.
Lehmann, Martin; Volkmer, Thomas (2014). Influence of micro structured surface on the bond quality of hardwood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard; Lehmann, Martin (2012). Measures for the maintenance of untreated wood facades In: World Conference on Timber Engineering (WCTE 2012). Auckland, New Zealand. 15-19.07.2012.
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759
Lehmann, Martin; Brunner, Maurice Yaw; Kraft, Sebastian (2010). Higher load bearing capabilities with elastic glue lines for glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.
Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.
Vallée, T.; Tannert, T.; Lehmann, Martin; Brunner, Maurice Yaw (July 2009). Probabilistic strength prediction of adhesively bonded joints composed of wooden adherends In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Brunner, Maurice Yaw; Lehmann, Martin (2009). Frp-prestressed timber : losses in prestressing force due to elastic , creep and shrinkage deformations of the timber In: FRPRCS. Sydney, Australia. 13-15 Jul 2009.
Lehmann, Martin (2009). Verstärkung von Holz mittels vorgespannten CFK-Lamellen In: Fortbildungskurs der SAH: Werkstoffkombinationen – ein Mehrwert für Holz (pp. 1-12). SAH
Lehmann, Martin; Vallée, T.; Tannert, T.; Brunner, Maurice Yaw (2009). Adhesively bonded joints composed of wooden load-bearing elements In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Brunner, Maurice Yaw; Schnueriger, M.; Lehmann, Martin (2008). Strengthening glulam beams with prestressed multilayer FRP carbon laminates In: Final Conference COST E34 Bonding of Timber (2008). Sopron, Hungary. 06.-07.05.2008.
Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari
Lehmann, Martin (2008). Ductile adhesive interface for glulam In: Holzbau Forschung und Praxis (2008). Stuttgart, Germany. 05.-06.03.2008.
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric (2008). Strengthening of timber structures using pre-stressed carbon fibre lamellas In: MEDACHS Conference (2008). Lisbon, Portugal. 20.-23.01.2008.
Lehmann, Martin; Clénin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Baublatt : aktuelle Informationen für die Schweizer Baubranche(41), pp. 28-30. Docu Media Schweiz
Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus
JP (2006). Unfolding anchor (JP2006153277 (A))
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.
Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.
Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648
Richter, Klaus; Lehmann, Martin; Properzi, Milena (2004). Long-term behaviour of pre-stressed timber-CFRP composites In: Enhancing bondline performance : proceedings of the final conference in COSTE 34 "Bonding of timber" (pp. 80-88). Lövér-Print Nyomdaipari
Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Lehmann, Martin; Clerc, Gaspard; Lehringer, C.; Strahm, T.; Volkmer, Thomas; ; (2018). Investigation of the bond quality and the finger joint strength of beech glulam In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Franke, Bettina; Lehringer, C.; Müller, Andreas; Sauser, Flavien (2016). Beech Glulam - Investigations of surface preparation and gluing In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Rehm, Klaus; Nühse, Jan Hendrik; Letsch, Bernhard; Dreier, Raphael; Kalt, Raphael (2016). Pulverbeschichtung von Holzwerkstoffen : Neue Lacke und Technologien Holztechnologie, 57(1), pp. 17-22.
Raedle, W.; Letsch, Bernhard; Buehlmann, U.; Uehlinger, Urs (2016). Test requirements for testing access control systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Letsch, Bernhard; Bühlmann, Urs; Uehlinger, Urs (2016). Thermal properties of access systems in field trials In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Letsch, Bernhard; Kümmin, P.; Uehlinger, Urs; Bühlmann, Urs (2015). Thermal properties of door and window access systems In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Rehm, Klaus; Letsch, Bernhard; Kalt, Raphael; Emmenegger, Florian (2014). Beschichtungsprozesse im Vergleich - Prozessbetrachtung und Kostenvergleich In: 1. MDF Pulversymposium 2014. Markdorf, Germany. 26.-27.11.2014.
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard; Lehmann, Martin (2012). Measures for the maintenance of untreated wood facades In: World Conference on Timber Engineering (WCTE 2012). Auckland, New Zealand. 15-19.07.2012.
Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard (2010). Nachhaltige Reinigung von unbehandelten Holzfassaden – Ergebnisse aus laufenden Forschungsprojekten In: 42. SAH Fortbildungskurs. SAH
Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2010). Reinigung von unbehandelten Holzfassaden Holzbaumarktschweiz : Fachmagazin für Holzbau, Architektur, Innenausbau, Produktion, 5, pp. 12-14.
Letsch, Bernhard (2009). Forschungsprojekt Fassaden Holzbaumarktschweiz(1), pp. 12-13. FS Media
Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management
Schnell, Dieter (2015). Zur Wiederentdeckung der historischen Stadt in den 1970er Jahren In: Falser, M.; Lipp, W. (eds.) Eine Zukunft für unsere Vergangenheit. Zum 40. Jubiläum des Europäischen Denkmalschutzjahres (1975-2015) (pp. 63-72). Berlin: Hendrik Blässler Verlag
Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Volkmer, Thomas; Lorenz, T.; Hass, P.; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the mechanical and physical properties of common oak wood. European Journal of Wood and Wood Products, 72(2), pp. 249-259. Springer 10.1007/s00107-014-0777-9
Volkmer, Thomas; von Arx, Urs; Moser, Regula; Hass, Philipp; Lorenz, Thomas; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the optical appearance and the emission behaviour of oak wood Bauphysik, 36(2), pp. 80-86. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410021
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
Jiang, J.; Bachtiar, E. V.; Lu, J.; Niemz, Peter (2017). Moisture-dependent orthotropic elasticity and strength properties of Chinese fir wood European Journal of Wood and Wood Products, 75(6), pp. 927-938. Springer 10.1007/s00107-017-1166-y
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee
Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.
Maeder, Fritz (5 June 2019). Überlegungen zur Ausschreibung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Steffen; Franke, Bettina; Magniere, Noëlie (August 2016). Load carrying capacity of cracked beams In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Franke, Steffen; Franke, Bettina; Magnière, Noëlie (16 June 2017). Load carrying capacity of cracked beams In: European workshop: Possible appearance of cracks during the life of glulam components in service class 1 and 2. Paris, France. 16.06.2017.
Franke, Steffen; Magnière, Noëlie (2014). Discussion of testing and evaluation methods for the embedment behaviour of connections In: INTER 2014. Bath, United Kingdom. 01.-04.09.2014.
Magnière, Noëlie; Franke, Steffen; Franke, Bettina (2014). Investigation on Elements Presenting Cracks in Timber Structures In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2
Sonderegger, Walter; Glaunsinger, Martin; Mannes, David; Volkmer, Thomas; Niemz, Peter (2015). Investigations into the influence of two different wood coatings on water diffusion determined by means of neutron imaging European Journal of Wood and Wood Products, 73(6), pp. 793-799. Springer 10.1007/s00107-015-0951-8
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter; Sonderegger, Walter (2015). Investigations on water vapour permeability of wood coatings for exterior use. Bauphysik, 37(3), pp. 186-195. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201510020
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter (2014). Investigations on the influence of moisture on the adhesion strength of surface coating of wood Bauphysik, 36(6), pp. 337-342. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410041
Yoon, Yonghoon; Plummer, Christopher JG; Thoemen, Heiko; Manson, Jan-Anders E (2016). Liquid CO2 processing of solid polylactide foam precursors. Journal of Cellular Plastics, 52(2), pp. 153-174. Sage Publications 10.1177/0021955X14537662
Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037
Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088
Mantovani, Camilla; Seidlitz, Nicolas; Wiederkehr, Martin; Uehlinger, Urs (2017). Quantitative evaluation of beech and locust dowels in contemporary window systems In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Franke, Steffen; Marto, João (2014). Investigation of Eucalyptus Globulus Wood for the Use as an Engineered Material In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Masuch, A.; Uehlinger, Urs; Donzé, Marc (2016). Die Klotzbrücke kommt aus der Tube Glaswelt, 3, pp. 58-60. Gentner
Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105
Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832
Mayer, Ingo (2019). VOC-Emissionen aus mehrschichtigen Wand- und Deckenelementen in Holz-Rahmenbauweise HolzBauSpezial Bauphysik & Gebäudetechnik, 10, pp. 421-431. Forum Holzbau
Mayer, Ingo; Selbmann, Karl-Heinz (2019). 3D drucken mit Holz Spirit biel/bienne, 1, p. 16.
Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21.
Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27.
OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))
Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105
Mayer, Ingo; Hinterleitner, Christina (2018). Décontaminer les biens culturels spirit biel/bienne, 1, pp. 18-19.
Mayer, Ingo (2018). Les fins limiers de la BFH au service d’un air ambiant sain spirit biel/bienne, 3, pp. 8-9.
Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21.
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15.
Bianchi, Sauro; Kroslakova, Ivana; Mayer, Ingo (2016). Determination of Molecular Structures of Condensed Tannins from Plant Tissues Using HPLC-UV Combined with Thiolysis and MALDI-TOF Mass Spectrometry. BIO-PROTOCOL, 6(20), pp. 1-14. 10.21769/BioProtoc.1975
Fitzken Da Vinci M. Niro, J.; Kyriazopoulos, Michail; Bianchi, Sauro; Mayer, Ingo; Eusebio, D.A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2016). Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives. International Wood Products Journal, 7(4), pp. 208-214. Taylor & Francis 10.1080/20426445.2016.1207039
Bianchi, Sauro; Koch, Gerald; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2016). Hot water extraction of Norway spruce (Picea abies [Karst.]) bark: analyses of the influence of bark aging and process parameters on the extract composition. Holzforschung, 70(7), pp. 619-631. De Gruyter 10.1515/hf-2015-0160
Bianchi, Sauro; Mayer, Ingo; Pichelin, Frédéric (2016). Chemische Eigenschaften von Rindenextrakten heimischer Nadelhölzer und Einsatz daraus hergestellter Klebstoffe Holztechnologie, 57(4), pp. 26-33.
Mayer, Ingo (2016). Polyvalent et durable – Le tanin issu des forêts suisses spirit biel/bienne, 2, pp. 24-25.
Mayer, Ingo (2016). Qualité de l’air intérieur: Matériaux sans émissions et inodores, question d’actualité spirit biel/bienne, 3, p. 12.
Bianchi, Sauro; Kroslakova, Ivana; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2015). Characterization of condensed tannins and carbohydrates in hot water bark extracts of European softwood species Phytochemistry, 120, pp. 53-61. Elsevier 10.1016/j.phytochem.2015.10.006
Bianchi, Sauro; Mayer, Ingo; Pichelin, Frédéric (2015). Chemische Eigenschaften von Rindenextrakten und Einsatz daraus hergestellter tanninbasierter Klebstoffe In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.
Mayer, Ingo; Nie, Yunyun (2015). Fully automated, on-line micro-scale chamber method for determination of volatile organic compound emissions from building products In: 17th Workshop “Geruch und Emissionen bei Kunststoffen“. Kassel, Germany. 16.-17.03.2015.
Bianchi, Sauro; Gloess, Alexia N.; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric (2014). Analysis of the structure of condensed tannins in water extracts from bark tissues of Norway spruce (Picea abies [Karst.]) and Silver fir (Abies alba [Mill.]) using MALDI-TOF mass spectrometry. Industrial Crops and Products, 61, pp. 430-437. Elsevier 10.1016/j.indcrop.2014.07.038
Mayer, Ingo (2014). Gerüche und Emissionen von Parkett- und Steinbodenölen In: 16th Workshop "Geruch und Emissionen bei Kunststoffen". Kassel, Germany. 24.-25.03.2014.
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).
Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).
Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.
Mayer, Ingo (2010). Ist die Luft rein? – Emissionen aus lackierten Oberflächen in die Innenraumluft In: InteriorDays. Biel/Bienne, Switzerland. 16.-17.09.2010.
Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.
Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.
Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12.
Mayer, Ingo (November 2009). Divergencias de color en Black Cherry aumentan Holz-Zentralblatt, Edición especial en lengua española por la „Fimma-Maderalia“, pp. 20-21.
Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.
Mayer, Ingo (2007). Biologische und chemische Untersuchungen über Holzinhaltsstoffe und deren Reaktionsmechanismen bei der wärmetechnischen Behandlung und Wasseraufbereitung in der Furnierindustrie (Dissertation, Universität Hamburg)
Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management
Wehle, Barbara; Geyer, Christoph; Melian Hernandez, Amabel (12 March 2019). Schall- und Luftdichthe¡t von Fenstern in der Renovation In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 377-388). Biel: FORUM HOLZBAU
Geyer, Christoph; Wehle, Barbara; Melian Hernandez, Amabel (12 March 2019). Ein neues Verfahren zur Berechnung der dynamischen Wärmekapazität von Holzbalkendecken In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 151-160). Biel: FORUM HOLZBAU
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Melian Hernandez, Amabel (2018). In situ measurement results for air permeability and sound insulation of historical windows In: 14th Conference on Advanced Building Skins. Bern, Switzerland. 01.-02.10.2018.
Geyer, Christoph; Müller, Andreas; Oesterlee, Cornelius; Melián Hernandez, Amabel; Gariglio, F. (2016). Reduzierung der Wärmebrücken von Tiefgaragendecken durch thermische Trennung mit Stahlbetonelementen aus Hochleistungsbeton In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Melián Hernández, Amabel; Geyer, Christoph; Müller, Andreas; Sanavi, A.; Pichler, J. (2014). Direct and flanking airborne and impact sound insulation of different Swiss timber floor and wall constructions. In: Forum Acusticum. Krakau, Poland. 09.-12.09.2014.
Mgbemene, Chigbo; Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Kimeng, Henry; Mustapha, Sani; Nduka, Okey (2014). Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive. Journal of Architectural Engineering, 20(1), 04013006-1. 10.1061/(ASCE)AE.1943-5568.0000135
Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2
Brombacher, Volker; Michel, Franco; Scheiding, Wolfram; Torres Uribe, Marco; Niemz, Peter (2017). Untersuchungen zum Einfluss einer nachträglichen Wärmebehandlung auf das Dämmverhalten von Holzfaserplatten. Bauphysik, 39(2), pp. 130-134. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201710005
Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Miettinen, Arttu; Rohumaa, Anti; Rautkari, Lauri (2015). Influence of Welding Time on Tensile-Shear Strength of Linear Friction Welded Birch (Betula pendula L.) Wood BioResources, 10(2), pp. 3481-3491. North Carolina State University
Mikulecky, Miroslav; Zürcher, Ernst (2014). Old Forestry Traditions and Modern Chronobiological Research: Lunar-Cycle-Related Sowing Time Influences Effectively Initial Plant Growth Global Journal of Botanical Science, 2(1), pp. 32-36. 10.12974/2311-858X.2014.02.01.5
Bachtiar, Erik V.; Sanabria, Segrio J.; Mittig, Johannes P.; Niemz, Peter (2017). Moisture-dependent elastic characteristics of walnut and cherry wood by means of mechanical and ultrasonic test incorporating three different ultrasound data evaluation techniques. Wood Science and Technology, 51(1), pp. 47-67. Springer 10.1007/s00226-016-0851-z
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)
AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Volkmer, Thomas; von Arx, Urs; Moser, Regula; Hass, Philipp; Lorenz, Thomas; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the optical appearance and the emission behaviour of oak wood Bauphysik, 36(2), pp. 80-86. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410021
Moshtaghin, Alireza F.; Franke, Steffen; Keller, Thomas; Vassilopoulos, Anastasios P. (2016). Random field-based modeling of size effect on the longitudinal tensile strength of clear timber Structural Safety, 58, pp. 60-68.
Moshtaghin, Alireza Farajzadeh; Franke, Steffen; Keller, Thomas; Vassilopoulos, Anastasios P. (May 2015). Spatial variability in longitudinal elastic modulus of clear timber In: EUROMECH-Colloquium 556 on Wood Mechanics. Dresden, Germany. 27-29.05.2015.
Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034
Murata, Koji; Bachtiar, Erik Valentine; Niemz, Peter (2017). Determination of mode I and mode II fracture toughness of walnut and cherry in TR and RT crack propagation system by the Arcan test. Holzforschung, 71(12), pp. 985-990. De Gruyter 10.1515/hf-2017-0063
Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
Mgbemene, Chigbo; Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Kimeng, Henry; Mustapha, Sani; Nduka, Okey (2014). Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive. Journal of Architectural Engineering, 20(1), 04013006-1. 10.1061/(ASCE)AE.1943-5568.0000135
Zoellig, S; Muster, M; Themessl, Adam Maximilian (September 2019). Butt-joint bonding of timber as a key technology for point-supported, biaxial load bearing flat slabs made of cross-laminated timber IOP Conference Series: Earth and Environmental Science, 323, 012144. 10.1088/1755-1315/323/1/012144
Zoellig, Stefan; Frangi, Andrea; Franke, Steffen; Muster, Marcel (August 2016). Timber structures 3.0 - New technology for multi-axial, slim, high performance timber structures In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.
Franke, Steffen; Franke, Bettina; Müller, Andreas; Heubuch, Sebastian Pascal (4 December 2019). Stabdübelverbindungen und eingeklebte Gewindestangen in Buchen-BSH In: 25. Internationales Holzbau-Forum (IHF 2019). Congress Innsbruck Österreich. 4. - 6.12.2019.
Heubuch, Sebastian Pascal; Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Eingeklebte Gewindestangen in Buchen BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Stabdübelverbindungen in Buchen-BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoff. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Müller, Andreas (1 September 2019). Zerstörungsfreie Prüfmethoden Wir Holzbauer, 6, pp. 34-37.
Müller, Andreas; Franke, Bettina (2019). Prüfung von geklebten Vollholzprodukten Wir Holzbauer, 5, pp. 26-29.
Müller, Andreas; Franke, Bettina (5 June 2019). Zustandserfassung - Einführung und Methodik In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen; Müller, Andreas (5 June 2019). Bewertung der Holzfeuchte und deren Auswirkungen In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Müller, Andreas; Amstutz Hugi, Corinne (1 May 2019). Methoden der Zustandserfassung Wir Holzbauer, 4, pp. 30-33.
Geyer, Christoph; Wehle, Barbara; Müller, Andreas (5 April 2019). Monitoring of water contents and temperatures of historical Walls with interior Insulation in Switzerland In: International WTA - PRECOM³OS symposium. Leuven, Belgium.
Müller, Andreas (1 March 2019). Zustandserfassung von Holzkonstruktionen Wir Holzbauer, 3, pp. 30-33.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (22 January 2019). Feuchteschutz sanierter Bestandswände mit Innendämmung Vergleich von Prognoseberechnung und Messung der Feuchtegehalte und Temperaturprofile In: Kolloquium Erhaltung von Bauwerken. Ostfildern, Deutschland. 22.-23.01.2019.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Moisture content and moisture-induced stresses of large glulam members: laboratory tests, in-situ measurements and modelling Wood Material Science & Engineering, 14(4), pp. 243-252. Taylor & Francis 10.1080/17480272.2018.1551930
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Gariglio, Federico (2018). Bestimmen, vergleichen, umrechnen : Vor-Ort-Methoden zum Messen des Wasseraufnahmekoeffizienten von Außenputzen B+B Bauen im Bestand, 7, pp. 46-51. Rudolf Müller
Schiere, Marcus Jacob; Franke, Bettina; Franke, Steffen; Müller, Andreas (2018). Comparison between local versus regional climate using monitoring data of timber structures In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Müller, Andreas (2018). Holz-Beton-Verbundbauweise: Geschichte und Übersicht In: 50. Fortbildungskurs S-WIN, Verbundkonstruktionen im Holzbau. Weinfelden, Switzerland. 23.-24.10.2018.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Melian Hernandez, Amabel (2018). In situ measurement results for air permeability and sound insulation of historical windows In: 14th Conference on Advanced Building Skins. Bern, Switzerland. 01.-02.10.2018.
Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (September 2017). Development of FBGS-systems for monitoring purposes of large timber structures In: SMAR 2017 - Fourth Conference on Smart Monitoring. Assessment and Rehabilitation of Civil Structures. Zürich, Schweiz. 13.-15.09.2017.
Müller, Andreas; Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen (June 2017). Advantages of moisture content monitoring in timber bridges In: 3rd International Conference on Timber Bridges. Skellefteå, Sweden. 26.-29.06.2017.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (2017). Messung der Wasseraufnahme historischer Putze. Vergleich verschiedener In-situ-Messerverfahren mit Labormessmethoden. Bauphysik, 39(4), pp. 245-252. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.20170025
Franke, Bettina; Franke, Steffen; Müller, Andreas; Schiere, Marcus Jacob (2017). Long-term behaviour of moisture content in timber constructions: relation to service classes and crack initiation. In: European workshop: possible appearance of cracks during the life of glulam components in service class 1 and 2. Paris, France. 16.06.2017.
Franke, Steffen; Franke, Bettina; Schiere, Marcus Jacob; Müller, Andreas (2017). Timber bridges: load carrying behaviour according to climate changes In: 39th IABSE Symposium - Engineering the Future. Vancouver, Canada. 21.-23.09.2017.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Greiner, Martin; Urech, P. (2017). Evaluation of in-situ measurement methods for air permeability of windows In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Müller, Andreas (2017). Robustheit und Dauerhaftigkeit - Einführung und Grundlagen In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient u. geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (2017). Was leisten In-situ-Messmethoden der Wasseraufnahmekoeffizienten von Aussenputzen historischer Gebäude? In: 28. Hanseatische Sanierungstage. Heringsdorf, Deutschland. 02.-04.11.2017.
Franke, Bettina; Franke, Steffen; Müller, Andreas; Schiere, Marcus Jacob (August 2016). Long-term behaviour of moisture content in timber constructions: relation to service classes In: INTER. Graz, Österreich. 16.-19.08.2016.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (August 2016). Moisture diffusion in wood: experimental and numerical investigations In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Franke, Bettina; Müller, Andreas; Simon, Antje (2016). Holzbrücken - Erkenntnisse zum Feuchteverhalten in den Tragquerschnitten aus Langzeitmessungen Bautechnik, 93(11), pp. 801-806. Wiley-Blackwell - STM 10.1002/bate.201600062
Müller, Andreas; Franke, Bettina (2016). Langzeit-Monitoring von Holzbrücken – Erkenntnisse zum Feuchteverhalten im Tragquerschnitt In: Internationale Holzbrückentage IHB 2016. Filderstadt, Deutschland. 08.-09.06.2016.
Franke, Bettina; Lehringer, C.; Müller, Andreas; Sauser, Flavien (2016). Beech Glulam - Investigations of surface preparation and gluing In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Geyer, Christoph; Müller, Andreas; Oesterlee, Cornelius; Melián Hernandez, Amabel; Gariglio, F. (2016). Reduzierung der Wärmebrücken von Tiefgaragendecken durch thermische Trennung mit Stahlbetonelementen aus Hochleistungsbeton In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Franke, Bettina; Franke, Steffen; Müller, Andreas (2015). Case studies: long term monitoring of timber bridges. Journal of Civil Structural Health Monitoring, 5(2), pp. 195-202. Springer 10.1007/s13349-014-0093-4
Müller, Andreas (2015). Informationsdienst Holz, Holz spezial Holzbau für kommunale Aufgaben Qualitätssicherung im Holzbau, pp. 28-35.
Müller, Andreas; Franke, Bettina (2015). Methoden der Zustandserfassung bei Holzbauwerken In: 8. Europäischer Kongress (EBH 2015). Bauen mit Holz im urbanen Raum. Köln, Germany. 21.-22.10.2015.
Scharmacher, Florian; Müller, Andreas; Schollmayer, M. (2015). Tragverhalten barockisierter Kirchendachstühle - Am Beispiel der Stadtkirche St. Katharina in Kaiserstuhl, Schweiz In: 4. Kolloquium "Erhaltung von Bauwerken". Technische Akademie Esslingen. Esslingen, Germany. 27.-28.01.2015.
Scharmacher, Florian; Müller, Andreas (2015). Zustandserfassung von Holztragwerken - Stand der Technik In: 4. Kolloquium "Erhaltung von Bauwerken". Technische Akademie Esslingen. Esslingen, Germany. 27.-28.01.2015.
Müller, Andreas; Brunner, Maurice Yaw (2014). Structural saftety thanks to quality: plan robustness, build with checks, monitor permanently In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Hernández, Amabel Melián; Geyer, Christoph; Müller, Andreas; Sanavi, Ali (2014). Acoustic sound insulation measurements for the direct and flanking transmission of typical Swiss timber constructions Acoustics in practice, 2(2), pp. 21-28. European Acoustics Association
Müller, Andreas; Franke, Bettina (2014). Assessment ‐ Introduction, procedure and methodology In: COST FP 1101 Workshop. Biel/Bienne, Switzerland. 23.-24.09.2014.
Franke, Bettina; Schusser, A.; Müller, Andreas (2014). Analysis of finger joints from beech wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Geyer, Christoph; Müller, Andreas (2014). Analysis of the influence of the construction elements on direct sound insulation of a timber floor with gravel weight load In: Forum Acusticum. Krakau, Poland. 09.-12.09.2014.
Scharmacher, Florian; Müller, Andreas; Brunner, Maurice Yaw (2014). Asphalt surfacing on timber bridges In: COST Timber bridge conference. Biel/Bienne, Switzerland. 25.-26.09.2014.
Müller, Andreas; Franke, Bettina; Franke, Steffen (2014). Langzeit-Monitoring von Holzbrücken: Erkenntnisse zum Feuchteverhalten im Tragquerschnitt In: 1. Brückenkolloquium: Beurteilung und Ertüchtigung und Instandsetzung von Brücken. Ostfildern, Germany. 24.-25.06.2014.
Melián Hernández, Amabel; Geyer, Christoph; Müller, Andreas; Sanavi, A.; Pichler, J. (2014). Direct and flanking airborne and impact sound insulation of different Swiss timber floor and wall constructions. In: Forum Acusticum. Krakau, Poland. 09.-12.09.2014.
Müller, Andreas; Franke, Bettina; Scharmacher, Florian (2014). Zustandserfassung von Holztragwerken - Stand der Technik In: 1. Brückenkolloquium: Beurteilung u. Ertüchtigung und Instandsetzung von Brücken. Ostfildern, Germany. 24.-25.06.2014.
Müller, Andreas (2014). Übersicht, Entwicklungen und Tendenzen In: S-Win Tagung. 46. Fortbildungskurs - Holzverbindungen mit Klebstoffen für die Bauanwendung. Weinfelden, Switzerland. 21.-22.10.2014.
Scharmacher, Florian; Müller, Andreas (2014). Asphaltbeläge auf Strassenbrücken mit Holztragwerk - technische Spezifiationen In: HolzBauSpezial. 3. Internationale Holzbrückentage. Bad-Wörishofen, Germany. 03.-04.04.2014.
Scharmacher, Florian; Müller, Andreas; Brunner, Maurice Yaw (2014). Timber Bridges with asphalt - surfacing technical specifications In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Hebel, Dirk E.; Heisel, Felix; Javadian, Alireza; Müller, Philipp; Lee, Simon; Aigner, Nikita; Schlesier, Karsten (2017). Construction with engineered bamboo In: Cultivated building materials: industrialized natural resources for architecture and construction (pp. 32-39). Basel: De Gruyter
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Shalbafan, Ali; Nadali, Amin; Thömen, Heiko (2020). A Multifunctional Mineral Binder for Plywood Production: The Effect of Manufacturing Parameters on Bonding Quality Materials, 13(10), p. 2360. 10.3390/ma13102360
Naderer, Elisabeth; Franke, Steffen; Franke, Bettina (August 2016). Numerical simulation of reinforced timber structures perpendicualr to the grain In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.
Navi, Parviz; Pizzi, Antonio; (2015). Thermo-Hydro-Mechanical Wood Behaviour and Processing” Selected Papers Holzforschung, 69(7), pp. 863-873. De Gruyter
Rhême, Martin; Botsis, John; Cugnoni, Joël; Navi, Parviz (2015). Mixed mode fracture behavior of welded wood joints investigated with the Arcan test Wood Science and Technology, 50(1), pp. 53-69. Springer 10.1007/s00226-015-0782-0
Navi, Parviz; Pizzi, Antonio (2015). Property changes in thermo-hydro-mechanical processing Holzforschung, 69(7), pp. 863-873. De Gruyter 10.1515/hf-2014-0198
Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148
Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735
Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.
Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.
Navi, Parviz; Pichelin, Frédéric (2008). Difficulties of the modelling of wood forming processes In: Dresdner Werkzeugmaschinen-Fachseminar (2008). Dresden, Germany. 11.-12.12.2008.
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
Mgbemene, Chigbo; Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Kimeng, Henry; Mustapha, Sani; Nduka, Okey (2014). Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive. Journal of Architectural Engineering, 20(1), 04013006-1. 10.1061/(ASCE)AE.1943-5568.0000135
Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.
OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))
Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.
Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.
Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013
Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004
Mayer, Ingo; Nie, Yunyun (2015). Fully automated, on-line micro-scale chamber method for determination of volatile organic compound emissions from building products In: 17th Workshop “Geruch und Emissionen bei Kunststoffen“. Kassel, Germany. 16.-17.03.2015.
Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1
Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung
Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104
Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003
Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD
Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH
Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Strahm, Thomas; Niemz, Peter (2018). Improvement of ash (Fraxinus excelsior L.) bonding quality with one-component polyurethane adhesive and hydrophilic primer for load-bearing application. International Journal of Adhesion and Adhesives, 85, pp. 303-307. Elsevier 10.1016/J.IJADHADH.2018.06.017
Beyer, Mario; Kránitz, Katalin; Bremer, Martina; Peters, Jana; Fischer, Steffen; Bues, Claus-Thomas; Niemz, Peter (2018). Effect of natural aging on the chemical composition of norway spruce, fir, and european oak wood. Pro Ligno, 14(2), pp. 3-19. Fundatia PRO Ligno
Niemz, Peter (2018). Bruchmechanische Untersuchungen an Holzverklebungen : eine Übersicht Holztechnologie, 61(5), pp. 26-31.
Niemz, Peter (2018). Fichten-Klangholz aus dem Schweizer Jura Holz-Zentralblatt, 33
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Niemz, Peter (2018). Improvement of ash (Fraxinus Excelsior L.) bonding quality with one component polyuerethane adhesive and a primer for glued laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Brunner, A.J.; Clerc, Gaspard; Niemz, Peter (2018). Acoustic emission monitoring of adhesively bonded wood joints under quasistatic and cyclic fatigue mode II flexure loads using end-notch-flexure specimens In: 33rd European Conference on Acoustic Emission Testing. Senlis, France. 12-14.09.2018.
Clerc, Gaspard; Brülisauer, Martina; Affolter, Samuel; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2017). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive. International Journal of Adhesion and Adhesives, 72, pp. 130-138. Elsevier 10.1016/j.ijadhadh.2016.09.008
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2017). The orthotropic behaviour of the physical‐mechanical properties of European beech wood Bautechnik, 92(1), pp. 174-183. Wiley-Blackwell - STM 10.1002/bate.201400079
Bachtiar, E. V.; Rüggeberg, M.; Hering, S.; Kaliske, M.; Niemz, Peter (2017). Estimating shear properties of walnut wood: a combined experimental and theoretical approach. Materials and Structures, 50(6), pp. 1-15. Springer 10.1617/s11527-017-1119-2
Bachtiar, Erik V.; Sanabria, Segrio J.; Mittig, Johannes P.; Niemz, Peter (2017). Moisture-dependent elastic characteristics of walnut and cherry wood by means of mechanical and ultrasonic test incorporating three different ultrasound data evaluation techniques. Wood Science and Technology, 51(1), pp. 47-67. Springer 10.1007/s00226-016-0851-z
Murata, Koji; Bachtiar, Erik Valentine; Niemz, Peter (2017). Determination of mode I and mode II fracture toughness of walnut and cherry in TR and RT crack propagation system by the Arcan test. Holzforschung, 71(12), pp. 985-990. De Gruyter 10.1515/hf-2017-0063
Bachtiar, Erik V.; Clerc, Gaspard; Brunner, Andreas J.; Kaliske, Michael; Niemz, Peter (2017). Static and dynamic tensile shear test of glued lap wooden joint with four different types of adhesives. Holzforschung, 71(5), pp. 391-396. De Gruyter 10.1515/hf-2016-0154
Bachtiar, Erik V.; Rüggeberg, Markus; Niemz, Peter (2017). Mechanical behavior of walnut ( Juglans regia L .) and cherry ( Prunus avium L .) wood in tension and compression in all anatomical directions. Revisiting the tensile / compressive stiffness ratios of wood. Holzforschung, 72(1), pp. 71-80. De Gruyter 10.1515/hf-2017-0053
Jiang, J.; Bachtiar, E. V.; Lu, J.; Niemz, Peter (2017). Moisture-dependent orthotropic elasticity and strength properties of Chinese fir wood European Journal of Wood and Wood Products, 75(6), pp. 927-938. Springer 10.1007/s00107-017-1166-y
Brombacher, Volker; Michel, Franco; Scheiding, Wolfram; Torres Uribe, Marco; Niemz, Peter (2017). Untersuchungen zum Einfluss einer nachträglichen Wärmebehandlung auf das Dämmverhalten von Holzfaserplatten. Bauphysik, 39(2), pp. 130-134. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201710005
Konopka, Daniel; Bachtiar, Erik V.; Niemz, Peter; Kaliske, Michael (2017). Experimental and numerical analysis of moisture transport in walnut and cherry wood in radial and tangential material directions. BioResources, 12(4), pp. 8920-8936. North Carolina State University
Niemz, Peter (2017). Zur Orthotropie der physikalisch-mechanischen Eigenschaften von Fichtenholz Annals of Warsaw University of Life Sciences - SGGW Forestry and Wood Technology, 99, pp. 174-183.
Niemz, Peter; Sonderegger, Walter (2017). Holzphysik München, Deutschland: Carl Hanser Verlag GmbH & Co. KG 10.3139/9783446445468
Ammann, Samuel; Schlegel, Sven; Beyer, Mario; Aehlig, Karsten; Lehmann, Martin; Jung, Heiko; Niemz, Peter (2016). Quality assessment of glued ash wood for construction engineering. European Journal of Wood and Wood Products, 74(1), pp. 67-74. Springer 10.1007/s00107-015-0981-2
Zerbst, David; Baensch, Franziska; Pfriem, Alexander; Niemz, Peter (2016). Visko-elastisches Verhalten von Holz-Klebstoff-Verbindungen unter zyklischer Zug-Druck-Belastung. Bautechnik, 93(11), pp. 795-800. Wiley-Blackwell - STM 10.1002/bate.201500102
Brombacher, Volker; Franco, Michel; Krug, Detlef; Torres, Marco U.; Niemz, Peter (2016). Investigations on improving wood fiber insulation boards depending on mechanical pulping conditions Bauphysik, 38(5), pp. 298-308. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201610026
Gereke, Thomas; Hering, Stefan; Niemz, Peter (2016). Finite element analysis of wood adhesive joints Pro Ligno, 12(1), pp. 3-14. Fundatia PRO Ligno
Clerc, Gaspard; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2016). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Niemz, Peter; Ammann, Samuel D. (2016). Mechanical performance of glue joints in structural hardwood elements In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Niemz, Peter (2016). Einfluss von Feuchteschwankungen bei Verklebungen Holz-Zentralblatt, pp. 1219-1221.
Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013
Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002
Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4
Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002
Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2
Sonderegger, Walter; Glaunsinger, Martin; Mannes, David; Volkmer, Thomas; Niemz, Peter (2015). Investigations into the influence of two different wood coatings on water diffusion determined by means of neutron imaging European Journal of Wood and Wood Products, 73(6), pp. 793-799. Springer 10.1007/s00107-015-0951-8
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter; Sonderegger, Walter (2015). Investigations on water vapour permeability of wood coatings for exterior use. Bauphysik, 37(3), pp. 186-195. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201510020
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions Pro Ligno, 11(4), pp. 37-42. Fundatia PRO Ligno
Ammann, Samuel; Niemz, Peter (2015). Specific fracture energy at glue joints in European beech wood International Journal of Adhesion and Adhesives, 60, pp. 47-53. Elsevier 10.1016/j.ijadhadh.2015.03.007
Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Güntekin, Ergün; Aydın, Tuğba Yılmaz; Niemz, Peter (2015). Prediction of compression properties in three orthotropic directions for some important Turkish wood species using ultrasound BioResources, 10(4), pp. 7252-7262.
Brunner, Andreas J.; Baensch, Franziska; Sause, Markus G. R.; Zauner, Michaela; Niemz, Peter (2015). Schallemissionsanalyse und Synchrotron- basierte Mikrotomografie an verklebten Miniatur-Zugprüfkörpern aus Fichtenholz In: 20. Kolloquium Schallenemission. Garmisch-Partenkirchen, Germany. 18.-19.06.2015.
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: Proceedings of the IAWPS 2015. Tokyo, Japan. 15.-17.03.2015.
Niemz, Peter; Zauner, M.; Brunner, A. J. (2015). In - situ Synchrotron based micro - tomography and acoustic emission measurement of Norway spruce samples under tensile load In: 19th. International Symposium on Nondestructive Testing and Evaluation of wood. Rio de Janeiro, Brazil. 22.-25.09.2015.
Niemz, Peter (2015). In-situ-Untersuchungen an Holzproben mittels Synchrotron-Tomographie In-situ Synchrotron based micro-tomography on wood samples In: 3. Holzanatomisches Kolloquium. Dresden, Germany. 01-02.10.2015.
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: International Conference "Wood Science and Engineering in the Third Millennium" - ICWSE 2015. Brasov, Romania. 05.-07.11.2015.
Volkmer, Thomas; Lorenz, T.; Hass, P.; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the mechanical and physical properties of common oak wood. European Journal of Wood and Wood Products, 72(2), pp. 249-259. Springer 10.1007/s00107-014-0777-9
Volkmer, Thomas; von Arx, Urs; Moser, Regula; Hass, Philipp; Lorenz, Thomas; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the optical appearance and the emission behaviour of oak wood Bauphysik, 36(2), pp. 80-86. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410021
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter (2014). Investigations on the influence of moisture on the adhesion strength of surface coating of wood Bauphysik, 36(6), pp. 337-342. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410041
Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004
Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003
Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.
Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag
Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035
Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.
Noël, Marion (2018). Des pistes vertes pour protéger le bois spirit biel/bienne, 3, pp. 14-15.
Grosse, C.; Noël, Marion; Thevenon, M.; Gérardin, P. (2018). FTIR-ATR monitoring of chemical changes of thermo-chemically modified beech wood degraded by brown-rot fungus In: IRG49 - International Research Group on Wood Protection. Johannesburg, South Africa. 29.04-03.05.2018.
Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Noël, Marion; Grosse, Charlotte; Burud, I.; Gérardin, Philippe (2018). Biopolyesters for wood modification : technical validation towards implementation In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Rautkari, Lauri; Gérardin, Philippe (2017). Influence of Water and Humidity on Wood Modification with Lactic Acid Journal of Renewable Materials, 6(3), pp. 259-269. Scrivener Publishing
Grosse, Charlotte; Noël, Marion; Rautkari, Lauri; Gerardin, Philippe (2017). Influence of hygro-thermal treatment temperature and duration on dimensional stabilisation of wood modified with poly (butylene succinate) In: Scientific Conference on Wood Protection. Ghent, Belgium. 04.-08.06.2017.
Volkmer, Thomas; Noël, Marion; Arnold, M.; Strautmann, J. (2016). Analysis of lignin degradation on wood surfaces to create a UV-protecting cellulose rich layer. International Wood Products Journal, 7(3), pp. 156-164. Taylor & Francis 10.1080/20426445.2016.1200826
Grosse, Charlotte; Thévenon, Marie France; Noël, Marion; Gerardin, Philippe (2016). Optimising wood chemical modification with lactic acid oligomers by screening of processing conditions and chemical additives In: 47th IRG Annual Meeting. Lisbon, Portugal. 15.-19.05.2016.
Noël, Marion; Grigsby, W.; Vitkeviciute, I.; Volkmer, Thomas (2015). Modifying wood with bio-polyesters: analysis and performance International Wood Products Journal, 6(1), pp. 14-20. Taylor & Francis 10.1179/2042645314Y.0000000086
Noël, Marion; Grigsby, Warren J.; Volkmer, Thomas (2015). Evaluating The Extent of Bio-Polyester Polymerization in Solid Wood by Thermogravimetric Analysis Journal of Wood Chemistry and Technology, 35(5), pp. 325-336. Taylor & Francis 10.1080/02773813.2014.962154
Noël, Marion; Grigsby, Warren; Volkmer, Thomas (2014). Investigating the Viscoelastic Properties and Mechanical Performance of Wood Modifi ed by Biopolyester Treatments. Journal of Renewable Materials, 2(4), pp. 291-305. Scrivener Publishing 10.7569/JRM.2014.634118
Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5
Strautmann, Jean; Noël, Marion; Volkmer, Thomas (October 2013). Surface qualification of weathered wood In: Joint COST FP0904 & FP1006 International Proceeding of the Workshop on characterization of modified wood in relation to wood bonding and coating performance. Rogla, Slovenia. 16-18 Oct 2013.
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019
Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034
Noël, Marion (2007). Innovative lactic acid biopolymer / wood based composite material elaboration (Dissertation, Université Henri Poincaré - Nancy I)
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Nyffenegger, Franziska; Barhoumi, Zohra Mirjam (June 2019). Verträgt sich mit dem Grundwasser – der neue Niederdruckjetting-Pfahl spirit biel/bienne, 2019(2), pp. 26-27. Berner Fachhochschule BFH
Schlüchter, C.; Nyffenegger, Franziska (2015). Wechselvolle Entstehung der Val Ftur Cratschla : Informationen aus dem Schweizerischen Nationalpark(2) Eidgenössische Nationalparkkommission
Nyffenegger, Franziska; Yavuz, V.; Akçar, N.; Ivy-Ochs, S.; Fredin, O.; Schlunegger, F. (2015). Rearward landsliding in sensitive clays: February 2011 massive failures at the Cöllolar coalfields, eastern Turkey (Unpublished). In: 13th Swiss Geoscience Meeting. Basel. 20.-21.11.2015.
Näher, Thomas; Thömen, Heiko; Burgert, Ingo (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft Zürich: Swiss Wood Innovation Network S-Win
Rehm, Klaus; Nühse, Jan Hendrik; Letsch, Bernhard; Dreier, Raphael; Kalt, Raphael (2016). Pulverbeschichtung von Holzwerkstoffen : Neue Lacke und Technologien Holztechnologie, 57(1), pp. 17-22.
Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management
Geyer, Christoph; Müller, Andreas; Oesterlee, Cornelius; Melián Hernandez, Amabel; Gariglio, F. (2016). Reduzierung der Wärmebrücken von Tiefgaragendecken durch thermische Trennung mit Stahlbetonelementen aus Hochleistungsbeton In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4
Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST
Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST
Bueche, Nicolas; Dumont, A.-G.; Ould Henia, M. (2016). Paquet de recherche PLANET : RS-3: Formulation et optimisation des performances. In: contribution (pp. 1-109). Bern: Bundesamt für Strassen ASTRA
Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2017). The orthotropic behaviour of the physical‐mechanical properties of European beech wood Bautechnik, 92(1), pp. 174-183. Wiley-Blackwell - STM 10.1002/bate.201400079
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions Pro Ligno, 11(4), pp. 37-42. Fundatia PRO Ligno
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: Proceedings of the IAWPS 2015. Tokyo, Japan. 15.-17.03.2015.
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: International Conference "Wood Science and Engineering in the Third Millennium" - ICWSE 2015. Brasov, Romania. 05.-07.11.2015.
Properzi, Milena; Pattis, Reto; Pichelin, Frédéric (2008). Wood ash as a resource for the production of innovative composite materials In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 2.-5.06.2008.
Beyer, Mario; Kránitz, Katalin; Bremer, Martina; Peters, Jana; Fischer, Steffen; Bues, Claus-Thomas; Niemz, Peter (2018). Effect of natural aging on the chemical composition of norway spruce, fir, and european oak wood. Pro Ligno, 14(2), pp. 3-19. Fundatia PRO Ligno
Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M. I.; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2015). Distribution of Silica-Coated Silver/Gold Nanostars in Soft- and Hardwood Applying SERS-Based Imaging Langmuir, 32(1), pp. 274-283. American Chemical Society (ACS) 10.1021/acs.langmuir.5b03617
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.
Zerbst, David; Baensch, Franziska; Pfriem, Alexander; Niemz, Peter (2016). Visko-elastisches Verhalten von Holz-Klebstoff-Verbindungen unter zyklischer Zug-Druck-Belastung. Bautechnik, 93(11), pp. 795-800. Wiley-Blackwell - STM 10.1002/bate.201500102
Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832
Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1
Bianchi, Sauro; Thömen, Heiko; Junginger, S.; Pichelin, Frédéric (2019). Medium density boards made of groundwood fibres: an analysis of their mechanical and physical properties European Journal of Wood and Wood Products, 77(1), pp. 71-77. Springer 10.1007/s00107-018-1367-z
Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003
Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.
Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH
OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))
Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105
Garcia, C.M.; San Pablo, M.R.; Bianchi, Sauro; Pichelin, Frédéric (2018). Resistance of fibreboards made of milled coconut husk and bonded with tannin against insects and fungi under Philippine conditions. International Wood Products Journal, 9(3), pp. 99-107. Taylor & Francis 10.1080/20426445.2018.1432169
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Strahm, Thomas; Niemz, Peter (2018). Improvement of ash (Fraxinus excelsior L.) bonding quality with one-component polyurethane adhesive and hydrophilic primer for load-bearing application. International Journal of Adhesion and Adhesives, 85, pp. 303-307. Elsevier 10.1016/J.IJADHADH.2018.06.017
Garcia, Carlos M.; San Pablo, Marciana R.; Bianchi, Sauro; Pichelin, Frédéric (2018). Evaluation of cocoboard resistance against Philippine termites In: 12th Conference of the Pacific Rim Termite Research Group. Yogyakarta, Indonesia. 21.-22.04.2018.
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Niemz, Peter (2018). Improvement of ash (Fraxinus Excelsior L.) bonding quality with one component polyuerethane adhesive and a primer for glued laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Clerc, Gaspard; Brülisauer, Martina; Affolter, Samuel; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2017). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive. International Journal of Adhesion and Adhesives, 72, pp. 130-138. Elsevier 10.1016/j.ijadhadh.2016.09.008
Böger, Thomas; Bianchi, Sauro; Salzer, Corinna; Pichelin, Frédéric (2017). Binderless boards made of milled coconut husk: an analysis of the technical feasibility and process restraints. International Wood Products Journal, 9(1), pp. 3-8. Taylor & Francis 10.1080/20426445.2017.1400756
Fitzken Da Vinci M. Niro, J.; Kyriazopoulos, Michail; Bianchi, Sauro; Mayer, Ingo; Eusebio, D.A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2016). Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives. International Wood Products Journal, 7(4), pp. 208-214. Taylor & Francis 10.1080/20426445.2016.1207039
Bianchi, Sauro; Koch, Gerald; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2016). Hot water extraction of Norway spruce (Picea abies [Karst.]) bark: analyses of the influence of bark aging and process parameters on the extract composition. Holzforschung, 70(7), pp. 619-631. De Gruyter 10.1515/hf-2015-0160
Placencia Peña, M.I.; Deutschle, A.L.; Saake, B.; Pizzi, A.; Pichelin, Frédéric (2016). Study of the solubility and composition of welded wood material at progressive welding times European Journal of Wood and Wood Products, 74(2), pp. 191-201. Springer 10.1007/s00107-015-0991-0
Bianchi, Sauro; Mayer, Ingo; Pichelin, Frédéric (2016). Chemische Eigenschaften von Rindenextrakten heimischer Nadelhölzer und Einsatz daraus hergestellter Klebstoffe Holztechnologie, 57(4), pp. 26-33.
Pichelin, Frédéric (2016). «Cocoboard» panneaux biosourcés à base de fibres de coco spirit biel/bienne, 2, p. 22. BFH
Pichelin, Frédéric (2016). Holz-Bedeutung und Verwendung In: Stuber, Thomas (ed.) Technik und Design (pp. 103-113). Bern: HEP Verlag
Clerc, Gaspard; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2016). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Placencia Peña, M. I.; Rhême, M.; Pizzi, A.; Pichelin, Frédéric (2015). Mechanical properties of welded wood joints with natural additives Holztechnologie, 56(6), pp. 5-9.
Bianchi, Sauro; Kroslakova, Ivana; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2015). Characterization of condensed tannins and carbohydrates in hot water bark extracts of European softwood species Phytochemistry, 120, pp. 53-61. Elsevier 10.1016/j.phytochem.2015.10.006
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Bianchi, Sauro; Mayer, Ingo; Pichelin, Frédéric (2015). Chemische Eigenschaften von Rindenextrakten und Einsatz daraus hergestellter tanninbasierter Klebstoffe In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.
Bianchi, Sauro; Gloess, Alexia N.; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric (2014). Analysis of the structure of condensed tannins in water extracts from bark tissues of Norway spruce (Picea abies [Karst.]) and Silver fir (Abies alba [Mill.]) using MALDI-TOF mass spectrometry. Industrial Crops and Products, 61, pp. 430-437. Elsevier 10.1016/j.indcrop.2014.07.038
Lehmann, Martin; Froidevaux, J.; Pichelin, Frédéric (2014). Structural light weight construction panel based on beech wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Pichelin, Frédéric (2014). Grundlagen der (Holz)verklebung In: S-Win Tagung / 46. Fortbildungskurs - Holzverbindungen mit Klebstoffen für die Bauanwendung. Weinfelden, Switzerland. 21.-22.10.2014.
Mgbemene, Chigbo; Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Kimeng, Henry; Mustapha, Sani; Nduka, Okey (2014). Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive. Journal of Architectural Engineering, 20(1), 04013006-1. 10.1061/(ASCE)AE.1943-5568.0000135
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
Placencia, Maria Inés; Pizzi, Antonio; Pichelin, Frédéric (June 2011). Linear friction welding for wood, a parameters study for up-scaled assemblies In: CIMAD 11 – 1º Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal. 7-9 Jun 2011.
Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088
Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.
Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).
Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097
Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.
Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939
Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020
Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric (2008). Strengthening of timber structures using pre-stressed carbon fibre lamellas In: MEDACHS Conference (2008). Lisbon, Portugal. 20.-23.01.2008.
Navi, Parviz; Pichelin, Frédéric (2008). Difficulties of the modelling of wood forming processes In: Dresdner Werkzeugmaschinen-Fachseminar (2008). Dresden, Germany. 11.-12.12.2008.
Properzi, Milena; Pattis, Reto; Pichelin, Frédéric (2008). Wood ash as a resource for the production of innovative composite materials In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 2.-5.06.2008.
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9
Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757
Ganne-Chédeville, Christelle; Pichelin, Frédéric (2007). Holzschweißen : Holz verbinden, schnell und ohne Leim Holz-Zentralblatt(40), pp. 1109-1110.
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Boonstra, M.; Pizzi, A.; Ganne-Chédeville, Christelle; Properzi, M.; Leban, J. M.; Pichelin, Frédéric (2006). Vibration welding of heat-treated wood Journal of Adhesion Science and Technology, 20(4), pp. 359-369. 10.1163/156856106776381758
Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068
Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services
JP (2006). Unfolding anchor (JP2006153277 (A))
Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.
Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.
Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4
Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6
Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444
Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305
Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8
Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.
Wieland, Stefanie; Properzi, Milena; Pichelin, Frédéric; Gfeller, Balz (2005). Einsatz des linearen Vibrationsschweissens in der Holzindustrie In: Frauenhofer WKI Workshop: Klebstoffe für Holzprodukte. Braunschweig, Germany. 10-11 Nov 2005.
Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))
Ammann AG (2004). Connecting element (EP 1 437 040 A1)
Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.
Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007
Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648
Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310
Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa
Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419
Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001
Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.
Melián Hernández, Amabel; Geyer, Christoph; Müller, Andreas; Sanavi, A.; Pichler, J. (2014). Direct and flanking airborne and impact sound insulation of different Swiss timber floor and wall constructions. In: Forum Acusticum. Krakau, Poland. 09.-12.09.2014.
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Placencia Peña, M.I.; Deutschle, A.L.; Saake, B.; Pizzi, A.; Pichelin, Frédéric (2016). Study of the solubility and composition of welded wood material at progressive welding times European Journal of Wood and Wood Products, 74(2), pp. 191-201. Springer 10.1007/s00107-015-0991-0
Placencia Peña, M. I.; Rhême, M.; Pizzi, A.; Pichelin, Frédéric (2015). Mechanical properties of welded wood joints with natural additives Holztechnologie, 56(6), pp. 5-9.
Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939
Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9
Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Boonstra, M.; Pizzi, A.; Ganne-Chédeville, Christelle; Properzi, M.; Leban, J. M.; Pichelin, Frédéric (2006). Vibration welding of heat-treated wood Journal of Adhesion Science and Technology, 20(4), pp. 359-369. 10.1163/156856106776381758
Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services
Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.
Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037
Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6
Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444
Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.
Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648
Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310
Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419
Navi, Parviz; Pizzi, Antonio; (2015). Thermo-Hydro-Mechanical Wood Behaviour and Processing” Selected Papers Holzforschung, 69(7), pp. 863-873. De Gruyter
Navi, Parviz; Pizzi, Antonio (2015). Property changes in thermo-hydro-mechanical processing Holzforschung, 69(7), pp. 863-873. De Gruyter 10.1515/hf-2014-0198
Placencia, Maria Inés; Pizzi, Antonio; Pichelin, Frédéric (June 2011). Linear friction welding for wood, a parameters study for up-scaled assemblies In: CIMAD 11 – 1º Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal. 7-9 Jun 2011.
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097
Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).
Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068
Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4
Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305
Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004
Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.
Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007
Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001
Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.
Placencia, Maria Inés; Pizzi, Antonio; Pichelin, Frédéric (June 2011). Linear friction welding for wood, a parameters study for up-scaled assemblies In: CIMAD 11 – 1º Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal. 7-9 Jun 2011.
Placencia Peña, M. I.; Rhême, M.; Pizzi, A.; Pichelin, Frédéric (2015). Mechanical properties of welded wood joints with natural additives Holztechnologie, 56(6), pp. 5-9.
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M. I.; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2015). Distribution of Silica-Coated Silver/Gold Nanostars in Soft- and Hardwood Applying SERS-Based Imaging Langmuir, 32(1), pp. 274-283. American Chemical Society (ACS) 10.1021/acs.langmuir.5b03617
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.
Placencia Peña, M.I.; Deutschle, A.L.; Saake, B.; Pizzi, A.; Pichelin, Frédéric (2016). Study of the solubility and composition of welded wood material at progressive welding times European Journal of Wood and Wood Products, 74(2), pp. 191-201. Springer 10.1007/s00107-015-0991-0
Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019
Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.
Yoon, Yonghoon; Plummer, Christopher JG; Thoemen, Heiko; Manson, Jan-Anders E (2016). Liquid CO2 processing of solid polylactide foam precursors. Journal of Cellular Plastics, 52(2), pp. 153-174. Sage Publications 10.1177/0021955X14537662
Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641
Rehm, Klaus (2018). Verfahren zur Pulverbeschichtung In: Hänsel, Andreas; Prieto, Jorge (eds.) Industrielle Beschichtung von Holz und Holzwerkstoffen im Möbelbau (pp. 264-271). München: Cark Hanser Verlag
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9
Boonstra, M.; Pizzi, A.; Ganne-Chédeville, Christelle; Properzi, M.; Leban, J. M.; Pichelin, Frédéric (2006). Vibration welding of heat-treated wood Journal of Adhesion Science and Technology, 20(4), pp. 359-369. 10.1163/156856106776381758
Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6
Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444
Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.
Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648
Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310
Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419
Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097
Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0
Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric (2008). Strengthening of timber structures using pre-stressed carbon fibre lamellas In: MEDACHS Conference (2008). Lisbon, Portugal. 20.-23.01.2008.
Properzi, Milena; Pattis, Reto; Pichelin, Frédéric (2008). Wood ash as a resource for the production of innovative composite materials In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 2.-5.06.2008.
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.
Lehmann, Martin; Clénin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Baublatt : aktuelle Informationen für die Schweizer Baubranche(41), pp. 28-30. Docu Media Schweiz
Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.
Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4
Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305
Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004
Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.
Wieland, Stefanie; Properzi, Milena; Pichelin, Frédéric; Gfeller, Balz (2005). Einsatz des linearen Vibrationsschweissens in der Holzindustrie In: Frauenhofer WKI Workshop: Klebstoffe für Holzprodukte. Braunschweig, Germany. 10-11 Nov 2005.
Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007
Richter, Klaus; Lehmann, Martin; Properzi, Milena (2004). Long-term behaviour of pre-stressed timber-CFRP composites In: Enhancing bondline performance : proceedings of the final conference in COSTE 34 "Bonding of timber" (pp. 80-88). Lövér-Print Nyomdaipari
Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa
Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001
Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.
Proske, Dirk (2018). Comparison of Large Dam Failure Frequencies with Failure Probabilities Beton- und Stahlbetonbau, 113(S2), pp. 2-6. 10.1002/best.201800047
Zürcher, Ernst; Quartey, G.A (2008). Durability investigations of lesser-known Ghanaian wood species In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.
Zürcher, Ernst; Rogenmoser, Christian; Quartney, Gladys A. (November 2009). Wenig bekannte Holzarten Westafrikas Holzforschung Schweiz, 2, pp. 12-14. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Franke, Bettina; Quenneville, Pierre (2014). Analysis of the fracture behavior of Radiata Pine timber and Laminated Veneer Lumber. Engineering Fracture Mechanics, 116, pp. 1-12. Elsevier 10.1016/j.engfracmech.2013.12.004
Raedle, W.; Letsch, Bernhard; Buehlmann, U.; Uehlinger, Urs (2016). Test requirements for testing access control systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.
Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari
Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Rautkari, Lauri; Gérardin, Philippe (2017). Influence of Water and Humidity on Wood Modification with Lactic Acid Journal of Renewable Materials, 6(3), pp. 259-269. Scrivener Publishing
Grosse, Charlotte; Noël, Marion; Rautkari, Lauri; Gerardin, Philippe (2017). Influence of hygro-thermal treatment temperature and duration on dimensional stabilisation of wood modified with poly (butylene succinate) In: Scientific Conference on Wood Protection. Ghent, Belgium. 04.-08.06.2017.
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Rautkari, Lauri (2015). Reducing the moisture sensitivity of linear friction welded birch ( Betula pendula L.) wood through thermal modification Journal of Adhesion Science and Technology, 29(22), pp. 2461-2474. Taylor & Francis 10.1080/01694243.2015.1069721
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Miettinen, Arttu; Rohumaa, Anti; Rautkari, Lauri (2015). Influence of Welding Time on Tensile-Shear Strength of Linear Friction Welded Birch (Betula pendula L.) Wood BioResources, 10(2), pp. 3481-3491. North Carolina State University
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0
Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.
Sukumaran, Sunil P.; Kisselbach, Andreas; Scholz, Frieder; Rehm, Christiane (2018). Investigation of machinability of kiln dried oil palm wood with regard to production of solid wood products Holztechnologie, 59(3), pp. 19-31.
Rehm, Christiane; Sukumaran, S. P.; Kisselbach, A.; Scholz, F. (2017). Investigation of machinability of klein dried oil palm wood with regard to production of solid wood products In: 23rd International Wood Machining Seminar. Warsaw, Poland. 28.-31.05.2017.
Rehm, Christiane; Bachmann, Eduard; Sitzmann, Stefan (2014). Fensterwerkzeuge – Dünne Schicht, grosse Wirkung In: 16. Holztechnologisches Kolloquium. Dresden, Germany. 03.-04.04.2014.
Rehm, Klaus (2018). Verfahren zur Pulverbeschichtung In: Hänsel, Andreas; Prieto, Jorge (eds.) Industrielle Beschichtung von Holz und Holzwerkstoffen im Möbelbau (pp. 264-271). München: Cark Hanser Verlag
Huwiler, Ursin; Rehm, Klaus (2018). Real-time control of powder coating In: PRA's 11th International Woodcoatings Congress. Amsterdam, The Netherlands. 23.-24.10.2018.
Rehm, Klaus; Nühse, Jan Hendrik; Letsch, Bernhard; Dreier, Raphael; Kalt, Raphael (2016). Pulverbeschichtung von Holzwerkstoffen : Neue Lacke und Technologien Holztechnologie, 57(1), pp. 17-22.
Rehm, Klaus; Letsch, Bernhard; Kalt, Raphael; Emmenegger, Florian (2014). Beschichtungsprozesse im Vergleich - Prozessbetrachtung und Kostenvergleich In: 1. MDF Pulversymposium 2014. Markdorf, Germany. 26.-27.11.2014.
Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management
Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.
Uehlinger, Urs; Rellstab, Christoph (2018). Mit Kleben das Holzfenster gerettet Schreinerzeitung, 34, pp. 8-811.
Donzé, Marc; Uehlinger, Urs; Rellstab, Christoph; Bühlmann, Urs (2015). Structural Sealant Glazing (SSG) – reinventing the wooden window In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services
Shalbafan, Ali; Rheme, M.; Thoemen, H. (2016). Ultra-light particleboard: characterization of foam core layer by digital image correlation. European Journal of Wood and Wood Products, 75(1), pp. 43-53. Springer 10.1007/s00107-016-1088-0
Placencia Peña, M. I.; Rhême, M.; Pizzi, A.; Pichelin, Frédéric (2015). Mechanical properties of welded wood joints with natural additives Holztechnologie, 56(6), pp. 5-9.
Rhême, Martin; Botsis, John; Cugnoni, Joël; Navi, Parviz (2015). Mixed mode fracture behavior of welded wood joints investigated with the Arcan test Wood Science and Technology, 50(1), pp. 53-69. Springer 10.1007/s00226-015-0782-0
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Rautkari, Lauri (2015). Reducing the moisture sensitivity of linear friction welded birch ( Betula pendula L.) wood through thermal modification Journal of Adhesion Science and Technology, 29(22), pp. 2461-2474. Taylor & Francis 10.1080/01694243.2015.1069721
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Miettinen, Arttu; Rohumaa, Anti; Rautkari, Lauri (2015). Influence of Welding Time on Tensile-Shear Strength of Linear Friction Welded Birch (Betula pendula L.) Wood BioResources, 10(2), pp. 3481-3491. North Carolina State University
Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.
Rhême, Martin (2014). Strength and fracture characterization of welded wood joints : Effects of moisture and mixt mode loadings. (Dissertation, École Polytechnique Fédérale de Lausanne, La Faculté des Sciences et Techniques de L' Ingénieur)
Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.
Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.
Lehmann, Martin; Clénin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Baublatt : aktuelle Informationen für die Schweizer Baubranche(41), pp. 28-30. Docu Media Schweiz
Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus
Richter, Klaus; Lehmann, Martin; Properzi, Milena (2004). Long-term behaviour of pre-stressed timber-CFRP composites In: Enhancing bondline performance : proceedings of the final conference in COSTE 34 "Bonding of timber" (pp. 80-88). Lövér-Print Nyomdaipari
Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1
Riggio, Mariapaola; Sandak, Jakub; Franke, Steffen (2015). Application of imaging techniques for detection of defects, damage and decay in timber structures on site Construction and Building Materials, 101(2), pp. 1241-1252. Elsevier 10.1016/j.conbuildmat.2015.06.065
Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.
Künzi Hummel, Katrin (2014). Wandlungsfähig, leistungsstark und nachhaltig: heutige Attribute des Holzes im Spiegel der Tradition In: Rinke, Mario; Schwartz, Joseph (eds.) Holz : Stoff oder Form. Transformationen einer Konstruktionslogik (pp. 307-319). Zürich: Niggli Verlag
Rist, Armin; Zmeeva, Natalia (June 2019). Sonne und Poren für saubere Luft spirit biel/bienne, 2019(2), pp. 28-29. Berner Fachhochschule BFH
Rist, Armin; Stolz, Martin; Heintzmann, P.; Tigges, F.; Gander, C. (2015). Machbarkeitsstudie zur Reduktion von Feinstaub oder seiner Vorläufergase mittels spezieller Strassenbeläge Schweizerischer Verband der Strassen- und Verkehrsfachleute
Schwarz-Platzer, Katharina; Stolz, Martin; Rist, Armin (2014). How to Adapt the Swiss Risk Management to Mountain Developing Countries In: International Conference on Technologies for Development. EPFL. 4. - 6.6.2014.
Cala, M.; Stolz, Martin; Baraniak, P.; Rist, Armin; Roduner, A. (2013). Large scale field tests for slope stabilizations made with flexible facings (Unpublished). In: EUROCK 2013 International Symposium on Rock Mechanics for Resources, Energy and Environment. Wroclaw, Polen. 21.-26.09.2013.
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M. I.; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2015). Distribution of Silica-Coated Silver/Gold Nanostars in Soft- and Hardwood Applying SERS-Based Imaging Langmuir, 32(1), pp. 274-283. American Chemical Society (ACS) 10.1021/acs.langmuir.5b03617
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.
Roduner, A.; Flum, D.; Stolz, Martin; Gröner, E. (2015). Large-scale field tests with flexible slope stabilization systems In: XVI European conference on soil mechanics and geotechnical engineering. Edinburgh, Scotland. 13.-17.09.2015.
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: 6th Canadian Geohazards Conference. Kingston, Canada. 15.-18.06.2014.
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: Queen’s University, Kingston, ON. Canada. 17 June 2014.
Cala, M.; Stolz, Martin; Baraniak, P.; Rist, Armin; Roduner, A. (2013). Large scale field tests for slope stabilizations made with flexible facings (Unpublished). In: EUROCK 2013 International Symposium on Rock Mechanics for Resources, Energy and Environment. Wroclaw, Polen. 21.-26.09.2013.
Stolz, Martin; Flum, Daniel; Roduner, Armin (2014). Grossfeldversuche mit flexiblen Böschungsstabilisierungssystemen. Österreichische Ingenieur- und Architekten-Zeitschrift, 159(1–12), pp. 28-31.
Brunner, Maurice Yaw; Schnüriger, Marco; Roemer, Michael (2009). Holz-Beton-Platten mit Klebeverbund In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 705-710). Biberach: Institut für Holzbau Hochschule
Zürcher, Ernst; Rogenmoser, C. (2008). Exploring biodiversity at the wood level – Timber identification and structure-properties relationships In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.
Zürcher, Ernst; Rogenmoser, Christian (2010). Considering reversible variations in wood properties : possible applications in the choice of the tree-felling date ? In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.
Zürcher, Ernst; Rogenmoser, Christian; Quartney, Gladys A. (November 2009). Wenig bekannte Holzarten Westafrikas Holzforschung Schweiz, 2, pp. 12-14. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Miettinen, Arttu; Rohumaa, Anti; Rautkari, Lauri (2015). Influence of Welding Time on Tensile-Shear Strength of Linear Friction Welded Birch (Betula pendula L.) Wood BioResources, 10(2), pp. 3481-3491. North Carolina State University
Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee
Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).
Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305
Mgbemene, Chigbo; Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Kimeng, Henry; Mustapha, Sani; Nduka, Okey (2014). Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive. Journal of Architectural Engineering, 20(1), 04013006-1. 10.1061/(ASCE)AE.1943-5568.0000135
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
JP (2006). Unfolding anchor (JP2006153277 (A))
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M. I.; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2015). Distribution of Silica-Coated Silver/Gold Nanostars in Soft- and Hardwood Applying SERS-Based Imaging Langmuir, 32(1), pp. 274-283. American Chemical Society (ACS) 10.1021/acs.langmuir.5b03617
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.
Hofer, Stephan; Rudin, Beat; Uehlinger, Urs (2017). System to certify windows/doors with burglary-resistant characteristics In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Rautkari, Lauri (2015). Reducing the moisture sensitivity of linear friction welded birch ( Betula pendula L.) wood through thermal modification Journal of Adhesion Science and Technology, 29(22), pp. 2461-2474. Taylor & Francis 10.1080/01694243.2015.1069721
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Miettinen, Arttu; Rohumaa, Anti; Rautkari, Lauri (2015). Influence of Welding Time on Tensile-Shear Strength of Linear Friction Welded Birch (Betula pendula L.) Wood BioResources, 10(2), pp. 3481-3491. North Carolina State University
Ghazi Wakili, Karim; Stöckli, Thomas (4 September 2019). Slim building envelopes using vacuum glazing and high-performance insulation Journal of Physics: Conference Series, 1343, 012193. 10.1088/1742-6596/1343/1/012193
Rädle, Wolfgang; Letsch, Bernhard; Bühlmann, Urs; Uehlinger, Urs (2016). Thermal properties of access systems in field trials In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Bühlmann, Urs; Tröbs, Hans-Martin; Zemp, Armin; Uehlinger, Urs (2016). Noise management through automated window systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang (15 June 2015). Schallschutz für den ungestörten Schlaf Schreiner Zeitung, 26/27, pp. 15-18.
Rädle, Wolfgang; Letsch, Bernhard; Kümmin, P.; Uehlinger, Urs; Bühlmann, Urs (2015). Thermal properties of door and window access systems In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Ding, T.; Bianchi, Sauro; Ganne-Chédeville, Christelle; Kilpeläinen, P.; Haapala, A.; Räty, T. (2017). Life cycle assessment of tannin extraction from spruce bark. iForest: Biogeosciences and Forestry, 10(5), pp. 807-814. 10.3832/ifor2342-010
Bachtiar, E. V.; Rüggeberg, M.; Hering, S.; Kaliske, M.; Niemz, Peter (2017). Estimating shear properties of walnut wood: a combined experimental and theoretical approach. Materials and Structures, 50(6), pp. 1-15. Springer 10.1617/s11527-017-1119-2
Bachtiar, Erik V.; Rüggeberg, Markus; Niemz, Peter (2017). Mechanical behavior of walnut ( Juglans regia L .) and cherry ( Prunus avium L .) wood in tension and compression in all anatomical directions. Revisiting the tensile / compressive stiffness ratios of wood. Holzforschung, 72(1), pp. 71-80. De Gruyter 10.1515/hf-2017-0053
Placencia Peña, M.I.; Deutschle, A.L.; Saake, B.; Pizzi, A.; Pichelin, Frédéric (2016). Study of the solubility and composition of welded wood material at progressive welding times European Journal of Wood and Wood Products, 74(2), pp. 191-201. Springer 10.1007/s00107-015-0991-0
Bianchi, Sauro; Koch, Gerald; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2016). Hot water extraction of Norway spruce (Picea abies [Karst.]) bark: analyses of the influence of bark aging and process parameters on the extract composition. Holzforschung, 70(7), pp. 619-631. De Gruyter 10.1515/hf-2015-0160
Bianchi, Sauro; Kroslakova, Ivana; Janzon, Ron; Mayer, Ingo; Saake, Bodo; Pichelin, Frédéric (2015). Characterization of condensed tannins and carbohydrates in hot water bark extracts of European softwood species Phytochemistry, 120, pp. 53-61. Elsevier 10.1016/j.phytochem.2015.10.006
Böger, Thomas; Bianchi, Sauro; Salzer, Corinna; Pichelin, Frédéric (2017). Binderless boards made of milled coconut husk: an analysis of the technical feasibility and process restraints. International Wood Products Journal, 9(1), pp. 3-8. Taylor & Francis 10.1080/20426445.2017.1400756
Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of cross laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20-23.08.2018.
Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of bross laminated timber In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Strahm, Thomas; Niemz, Peter (2018). Improvement of ash (Fraxinus excelsior L.) bonding quality with one-component polyurethane adhesive and hydrophilic primer for load-bearing application. International Journal of Adhesion and Adhesives, 85, pp. 303-307. Elsevier 10.1016/J.IJADHADH.2018.06.017
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Niemz, Peter (2018). Improvement of ash (Fraxinus Excelsior L.) bonding quality with one component polyuerethane adhesive and a primer for glued laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Garcia, C.M.; San Pablo, M.R.; Bianchi, Sauro; Pichelin, Frédéric (2018). Resistance of fibreboards made of milled coconut husk and bonded with tannin against insects and fungi under Philippine conditions. International Wood Products Journal, 9(3), pp. 99-107. Taylor & Francis 10.1080/20426445.2018.1432169
Garcia, Carlos M.; San Pablo, Marciana R.; Bianchi, Sauro; Pichelin, Frédéric (2018). Evaluation of cocoboard resistance against Philippine termites In: 12th Conference of the Pacific Rim Termite Research Group. Yogyakarta, Indonesia. 21.-22.04.2018.
Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2
Bachtiar, Erik V.; Sanabria, Segrio J.; Mittig, Johannes P.; Niemz, Peter (2017). Moisture-dependent elastic characteristics of walnut and cherry wood by means of mechanical and ultrasonic test incorporating three different ultrasound data evaluation techniques. Wood Science and Technology, 51(1), pp. 47-67. Springer 10.1007/s00226-016-0851-z
Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004
Melián Hernández, Amabel; Geyer, Christoph; Müller, Andreas; Sanavi, A.; Pichler, J. (2014). Direct and flanking airborne and impact sound insulation of different Swiss timber floor and wall constructions. In: Forum Acusticum. Krakau, Poland. 09.-12.09.2014.
Hernández, Amabel Melián; Geyer, Christoph; Müller, Andreas; Sanavi, Ali (2014). Acoustic sound insulation measurements for the direct and flanking transmission of typical Swiss timber constructions Acoustics in practice, 2(2), pp. 21-28. European Acoustics Association
Riggio, Mariapaola; Sandak, Jakub; Franke, Steffen (2015). Application of imaging techniques for detection of defects, damage and decay in timber structures on site Construction and Building Materials, 101(2), pp. 1241-1252. Elsevier 10.1016/j.conbuildmat.2015.06.065
Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press
Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)
Brunner, Andreas J.; Baensch, Franziska; Sause, Markus G. R.; Zauner, Michaela; Niemz, Peter (2015). Schallemissionsanalyse und Synchrotron- basierte Mikrotomografie an verklebten Miniatur-Zugprüfkörpern aus Fichtenholz In: 20. Kolloquium Schallenemission. Garmisch-Partenkirchen, Germany. 18.-19.06.2015.
Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Franke, Bettina; Lehringer, C.; Müller, Andreas; Sauser, Flavien (2016). Beech Glulam - Investigations of surface preparation and gluing In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Schiere, Marcus Jacob; Franke, Bettina; Scharmacher, Florian (5 June 2019). Leistungsfähigkeit der Klebefuge in Brettschichtholz In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Scharmacher, Florian; Müller, Andreas; Schollmayer, M. (2015). Tragverhalten barockisierter Kirchendachstühle - Am Beispiel der Stadtkirche St. Katharina in Kaiserstuhl, Schweiz In: 4. Kolloquium "Erhaltung von Bauwerken". Technische Akademie Esslingen. Esslingen, Germany. 27.-28.01.2015.
Scharmacher, Florian; Müller, Andreas (2015). Zustandserfassung von Holztragwerken - Stand der Technik In: 4. Kolloquium "Erhaltung von Bauwerken". Technische Akademie Esslingen. Esslingen, Germany. 27.-28.01.2015.
Scharmacher, Florian; Müller, Andreas; Brunner, Maurice Yaw (2014). Asphalt surfacing on timber bridges In: COST Timber bridge conference. Biel/Bienne, Switzerland. 25.-26.09.2014.
Müller, Andreas; Franke, Bettina; Scharmacher, Florian (2014). Zustandserfassung von Holztragwerken - Stand der Technik In: 1. Brückenkolloquium: Beurteilung u. Ertüchtigung und Instandsetzung von Brücken. Ostfildern, Germany. 24.-25.06.2014.
Scharmacher, Florian; Müller, Andreas (2014). Asphaltbeläge auf Strassenbrücken mit Holztragwerk - technische Spezifiationen In: HolzBauSpezial. 3. Internationale Holzbrückentage. Bad-Wörishofen, Germany. 03.-04.04.2014.
Scharmacher, Florian; Müller, Andreas; Brunner, Maurice Yaw (2014). Timber Bridges with asphalt - surfacing technical specifications In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Brombacher, Volker; Michel, Franco; Scheiding, Wolfram; Torres Uribe, Marco; Niemz, Peter (2017). Untersuchungen zum Einfluss einer nachträglichen Wärmebehandlung auf das Dämmverhalten von Holzfaserplatten. Bauphysik, 39(2), pp. 130-134. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201710005
Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen; Müller, Andreas (5 June 2019). Bewertung der Holzfeuchte und deren Auswirkungen In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Schiere, Marcus Jacob; Franke, Bettina; Scharmacher, Florian (5 June 2019). Leistungsfähigkeit der Klebefuge in Brettschichtholz In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (5 June 2019). Einsatz der Pressverklebung - Forschungsergebnisse In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Moisture content and moisture-induced stresses of large glulam members: laboratory tests, in-situ measurements and modelling Wood Material Science & Engineering, 14(4), pp. 243-252. Taylor & Francis 10.1080/17480272.2018.1551930
Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen (2018). Stress developments in large timber cross sections in relation to geometry and encountered climate In: 2018 World Conference on Timber Engineering. Seoul / Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (2018). Pressverklebung aus der Sicht der Forschung In: S-Win-Tagung 2018, Von der Forschung zur Praxis. Biel/Bienne, Switzerland. 16.05.2018.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (2018). Press glued connections: research results for discussion and standardization In: International Network on Timber Engineering Research (INTER 2018). Tallinn, Estonia. 13.-16.08.2018.
Schiere, Marcus Jacob; Franke, Bettina; Franke, Steffen (2018). Antworten zur Tragfähigkeit infolge dynamischer Klimawechsel In: S-Win-Tagung 2018, Von der Forschung zur Praxis. Biel/Bienne, Switzerland. 16.05.2018.
Schiere, Marcus Jacob; Franke, Bettina; Franke, Steffen; Müller, Andreas (2018). Comparison between local versus regional climate using monitoring data of timber structures In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Schiere, Marcus Jacob; Franke, Steffen (2018). Quality of press glued connections manufactured with different fasteners and production techniques In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Schiere, Marcus Jacob; Franke, Steffen (2018). Adhesive curing pressure for press gluing apllications established through different fastener types In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (September 2017). Development of FBGS-systems for monitoring purposes of large timber structures In: SMAR 2017 - Fourth Conference on Smart Monitoring. Assessment and Rehabilitation of Civil Structures. Zürich, Schweiz. 13.-15.09.2017.
Müller, Andreas; Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen (June 2017). Advantages of moisture content monitoring in timber bridges In: 3rd International Conference on Timber Bridges. Skellefteå, Sweden. 26.-29.06.2017.
Franke, Bettina; Franke, Steffen; Müller, Andreas; Schiere, Marcus Jacob (2017). Long-term behaviour of moisture content in timber constructions: relation to service classes and crack initiation. In: European workshop: possible appearance of cracks during the life of glulam components in service class 1 and 2. Paris, France. 16.06.2017.
Franke, Steffen; Franke, Bettina; Schiere, Marcus Jacob; Müller, Andreas (2017). Timber bridges: load carrying behaviour according to climate changes In: 39th IABSE Symposium - Engineering the Future. Vancouver, Canada. 21.-23.09.2017.
Franke, Steffen; Hausammann, Roman; Schiere, Marcus Jacob (October 2016). Development of a span wood based self-supported compact façade system for non-residential buildings In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Franke, Bettina; Franke, Steffen; Müller, Andreas; Schiere, Marcus Jacob (August 2016). Long-term behaviour of moisture content in timber constructions: relation to service classes In: INTER. Graz, Österreich. 16.-19.08.2016.
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (August 2016). Moisture diffusion in wood: experimental and numerical investigations In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Hausammann, Roman; Franke, Steffen; Schiere, Marcus Jacob; Giordano, Nicolàs (2016). Development of a long span self-supporting compact façade system for industrial buildings In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management
Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2
Zürcher, Ernst; Schlaepfer, R.; Giudici, F. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste
Zürcher, Ernst; Schlaepfer, Rodolphe (2014). Lunar Rhythmicities in the Biology of Trees, Especially in the Germination of European Spruce (Picea abies Karst.): A New Statistical Analysis of Previously Published Data Journal of Plant Studies, 3(1), pp. 103-113. 10.5539/jps.v3n1p103
Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Geyer, Christoph; Schlegel, Stefan; Harder, Ralf (2017). Bauphysiker legen beim Schallschutz den Finger auf die wunde Stelle Schweizer Holzrevue(10/11), pp. 2-5.
Ammann, Samuel; Schlegel, Sven; Beyer, Mario; Aehlig, Karsten; Lehmann, Martin; Jung, Heiko; Niemz, Peter (2016). Quality assessment of glued ash wood for construction engineering. European Journal of Wood and Wood Products, 74(1), pp. 67-74. Springer 10.1007/s00107-015-0981-2
Hebel, Dirk E.; Heisel, Felix; Javadian, Alireza; Müller, Philipp; Lee, Simon; Aigner, Nikita; Schlesier, Karsten (2017). Construction with engineered bamboo In: Cultivated building materials: industrialized natural resources for architecture and construction (pp. 32-39). Basel: De Gruyter
Nyffenegger, Franziska; Yavuz, V.; Akçar, N.; Ivy-Ochs, S.; Fredin, O.; Schlunegger, F. (2015). Rearward landsliding in sensitive clays: February 2011 massive failures at the Cöllolar coalfields, eastern Turkey (Unpublished). In: 13th Swiss Geoscience Meeting. Basel. 20.-21.11.2015.
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Zürcher, Ernst; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Schlüchter, C.; Nyffenegger, Franziska (2015). Wechselvolle Entstehung der Val Ftur Cratschla : Informationen aus dem Schweizerischen Nationalpark(2) Eidgenössische Nationalparkkommission
Stolz, Martin; Schlüchter, C.; Akçar, N.; Ivy-Ochs, S. (2015). Relevance of Quaternary alpine paleoglaciations for present day geoengineering projects (Unpublished). In: XIX INQUA Congress. Nagoya, Japan. 26.07.-02.08.2015.
Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104
Schmidt, Henrik; Benthien, Jan T.; Thömen, Heiko (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels European Journal of Wood and Wood Products, 71(5), pp. 591-597. Springer 10.1007/s00107-013-0719-y
Schnell, Dieter (October 2018). Städtebau auf dem Dorf: Alt und Neu in Cressier FR von VVPH architectes werk, bauen + wohnen, 10, pp. 17-22.
Schnell, Dieter (2017). Sanierung oder Neubau? Rathausprojekte am Ende des 18. und Anfang des 19. Jahrhunderts Berner Zeitschrift für Geschichte, 79(3), pp. 49-60.
Schnell, Dieter (2017). Zur Architekturkrise in Bern. In: Flückiger, G.; Krethlow, M.; Tobler, K. (eds.) Bern 70 (pp. 111-124). Bern: Edition Atelier
Schnell, Dieter (2016). Raum schaffen, Würde zeigen, Vorreiter sein. Verwaltung. In: Bundesbauten: Die Architektur der offiziellen Schweiz (pp. 418-431). Zürich: Hochparterre
Schnell, Dieter (2016). Zur Diskrepanz von Planung und Realität im 20. Jahrhundert. Berner Zeitschrift für Geschichte, Heft 1, pp. 32-50.
Schnell, Dieter (2016). "Zurückweisung jeder Ansprüche auf Luxus und eiteln Aufwand…" Bauen in Bern um 1815.. In: Kaestli, Tobias (ed.) Nach Napoleon. Die Restauration, der Wiener Kongress und die Zukunft der Schweiz 1813-1815. Archiv des Historischen Vereins des Kantons Bern AHVB Band 91. 2 (pp. 235-252). Baden: Hier und Jetzt
Schnell, Dieter (2015). Zur Wiederentdeckung der historischen Stadt in den 1970er Jahren In: Falser, M.; Lipp, W. (eds.) Eine Zukunft für unsere Vergangenheit. Zum 40. Jubiläum des Europäischen Denkmalschutzjahres (1975-2015) (pp. 63-72). Berlin: Hendrik Blässler Verlag
Schnell, Dieter (2014). Les objets dans l'espace et dans le temps. In: Conserver ou démolir? le patrimoine bâti à l'aune de l'éthique (pp. 99-137). Gollion: Infolio
Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002
Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003
Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1
Brunner, Maurice Yaw; Schnueriger, M.; Lehmann, Martin (2008). Strengthening glulam beams with prestressed multilayer FRP carbon laminates In: Final Conference COST E34 Bonding of Timber (2008). Sopron, Hungary. 06.-07.05.2008.
Brunner, Maurice Yaw; Schnueriger, M. (2004). Strengthening of timber beams with prestressed artificial fibers: development of a suitable adhesive technology In: International Symposium on Advanced Timber and Timber-composites Elements for Building (pp. 45-50). San Michele all'Andige, Italy: CNR-Ivalsa
Brunner, Maurice Yaw; Schnüriger, Marco; Roemer, Michael (2009). Holz-Beton-Platten mit Klebeverbund In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 705-710). Biberach: Institut für Holzbau Hochschule
Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari
Kliger, Robert; Haghani, Reza; Brunner, Maurice Yaw; Harte, Annette M.; Schober, Kay-Uwe (2016). Wood-based beams strengthened with FRP laminates: improved performance with pre-stressed systems European Journal of Wood and Wood Products, 74(3), pp. 319-330. Springer 10.1007/s00107-015-0970-5
Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1
Baraniak, P.; Stolz, Martin; Schoevaerts, B.; Wendeler, C. (May 2016). New results of high-tensile steel meshes tested in first large scale field test application In: 1st Southern African Geotechnical Conference. Sun City / South Africa. 5 - 6 May 2016.
Scharmacher, Florian; Müller, Andreas; Schollmayer, M. (2015). Tragverhalten barockisierter Kirchendachstühle - Am Beispiel der Stadtkirche St. Katharina in Kaiserstuhl, Schweiz In: 4. Kolloquium "Erhaltung von Bauwerken". Technische Akademie Esslingen. Esslingen, Germany. 27.-28.01.2015.
Rehm, Christiane; Sukumaran, S. P.; Kisselbach, A.; Scholz, F. (2017). Investigation of machinability of klein dried oil palm wood with regard to production of solid wood products In: 23rd International Wood Machining Seminar. Warsaw, Poland. 28.-31.05.2017.
Sukumaran, Sunil P.; Kisselbach, Andreas; Scholz, Frieder; Rehm, Christiane (2018). Investigation of machinability of kiln dried oil palm wood with regard to production of solid wood products Holztechnologie, 59(3), pp. 19-31.
Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))
Franke, Bettina; Schusser, A.; Müller, Andreas (2014). Analysis of finger joints from beech wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Volkmer, Thomas; Franke, Bettina; Schusser, Anna (2014). Analysis of the Penetration of Adhesives at Finger-Joints in Beech Wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Künzi Hummel, Katrin (2014). Wandlungsfähig, leistungsstark und nachhaltig: heutige Attribute des Holzes im Spiegel der Tradition In: Rinke, Mario; Schwartz, Joseph (eds.) Holz : Stoff oder Form. Transformationen einer Konstruktionslogik (pp. 307-319). Zürich: Niggli Verlag
Schwarz-Platzer, Katharina; Wendeler, Corinna; Braendle, Rico; Stolz, Martin (2019). Experimental investigation of forces along anchors subjected to dynamic loading under tension and compression in field tests Canadian Geotechnical Journal, 57(5), pp. 770-782. 10.1139/cgj-2018-0144
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: 6th Canadian Geohazards Conference. Kingston, Canada. 15.-18.06.2014.
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: Queen’s University, Kingston, ON. Canada. 17 June 2014.
Schwarz-Platzer, Katharina; Stolz, Martin; Rist, Armin (2014). How to Adapt the Swiss Risk Management to Mountain Developing Countries In: International Conference on Technologies for Development. EPFL. 4. - 6.6.2014.
Schwarz-Platzer, Katharina (2013). Force measurements along anchors during dynamic loading Mitteilungen der Geotechnik Schweiz, 166, pp. 121-129.
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21.
Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013
Mantovani, Camilla; Seidlitz, Nicolas; Wiederkehr, Martin; Uehlinger, Urs (2017). Quantitative evaluation of beech and locust dowels in contemporary window systems In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Mayer, Ingo; Selbmann, Karl-Heinz (2019). 3D drucken mit Holz Spirit biel/bienne, 1, p. 16.
Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004
Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press
Shalbafan, Ali; Thömen, Heiko (2020). Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features Applied Sciences, 10(2), p. 593. MDPI 10.3390/app10020593
Khojasteh-Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products European Journal of Wood and Wood Products, 78(3), pp. 593-603. Springer 10.1007/s00107-020-01519-8
Shalbafan, Ali; Nadali, Amin; Thömen, Heiko (2020). A Multifunctional Mineral Binder for Plywood Production: The Effect of Manufacturing Parameters on Bonding Quality Materials, 13(10), p. 2360. 10.3390/ma13102360
Shalbafan, Ali; Rheme, M.; Thoemen, H. (2016). Ultra-light particleboard: characterization of foam core layer by digital image correlation. European Journal of Wood and Wood Products, 75(1), pp. 43-53. Springer 10.1007/s00107-016-1088-0
Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: 6th Canadian Geohazards Conference. Kingston, Canada. 15.-18.06.2014.
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: Queen’s University, Kingston, ON. Canada. 17 June 2014.
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Sigrist, Christophe (2018). Testing and evaluation – A: General motivation, comments and overview In: Cost Action FP1402 / WG2, September 13-14 2018. Munich, Germany. 13.-14.09.2018.
Sigrist, Christophe; Lehmann, Martin (2016). Mechanical properties of glulam produced from visually graded boards. In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Sigrist, Christophe (2015). Mechanische Eigenschaften von Brettschichtholz hergestellt aus visuell sortierten Fichtenbrettern In: Neue Erkenntnisse zur Zuverlässigkeit von Brettschichtholz. SIA Dokumentation: Vol. 0251 (pp. 9-22). Zürich: SIA Schweizerischer Ingenieur und Architektenverein
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Bachmann, Eduard; Sigrist, Christophe (2014). Complex timber structures In: Gramazio, F.; Kohler, M.; Willmann, J. (eds.) The robotic touch: how robots change architecture (pp. 364-377). Zürich: Park Books
Zock, P.; Bachmann, Eduard; Sitzmann, S.; Sigrist, Christophe (2014). Neue Verbindung für komplexe, robotergefertigte Holzstrukture In: S-Win Tagung. 46. Fortbildungskurs - Holzverbindungen mit Klebstoffen für die Bauanwendung. Weinfelden, Switzerland. 21.-22.10.2014.
Sigrist, Christophe; Lehmann, Martin (2014). Potential of CLT produced from non-structural grade Australian Pinus Radiata In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Franke, Bettina; Müller, Andreas; Simon, Antje (2016). Holzbrücken - Erkenntnisse zum Feuchteverhalten in den Tragquerschnitten aus Langzeitmessungen Bautechnik, 93(11), pp. 801-806. Wiley-Blackwell - STM 10.1002/bate.201600062
Doerfel, Marion; Sinclair, M.; Zyryanov, V.; Gerlach, J. (2015). Education, science and practice: international student workshops focus on successful infrastructure solutions to improve VRUs' safety In: Internationale Konferenz. Seoul, Southkorea. 01.11.2015.
Zock, P.; Bachmann, Eduard; Sitzmann, S.; Sigrist, Christophe (2014). Neue Verbindung für komplexe, robotergefertigte Holzstrukture In: S-Win Tagung. 46. Fortbildungskurs - Holzverbindungen mit Klebstoffen für die Bauanwendung. Weinfelden, Switzerland. 21.-22.10.2014.
Sitzmann, Stefan (2016). Robotergestützt gebaut Robotergestützt gebaut, pp. 16-18.
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Rehm, Christiane; Bachmann, Eduard; Sitzmann, Stefan (2014). Fensterwerkzeuge – Dünne Schicht, grosse Wirkung In: 16. Holztechnologisches Kolloquium. Dresden, Germany. 03.-04.04.2014.
Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2017). The orthotropic behaviour of the physical‐mechanical properties of European beech wood Bautechnik, 92(1), pp. 174-183. Wiley-Blackwell - STM 10.1002/bate.201400079
Niemz, Peter; Sonderegger, Walter (2017). Holzphysik München, Deutschland: Carl Hanser Verlag GmbH & Co. KG 10.3139/9783446445468
Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002
Sonderegger, Walter; Glaunsinger, Martin; Mannes, David; Volkmer, Thomas; Niemz, Peter (2015). Investigations into the influence of two different wood coatings on water diffusion determined by means of neutron imaging European Journal of Wood and Wood Products, 73(6), pp. 793-799. Springer 10.1007/s00107-015-0951-8
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter; Sonderegger, Walter (2015). Investigations on water vapour permeability of wood coatings for exterior use. Bauphysik, 37(3), pp. 186-195. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201510020
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions Pro Ligno, 11(4), pp. 37-42. Fundatia PRO Ligno
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: Proceedings of the IAWPS 2015. Tokyo, Japan. 15.-17.03.2015.
Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: International Conference "Wood Science and Engineering in the Third Millennium" - ICWSE 2015. Brasov, Romania. 05.-07.11.2015.
Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.
Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Stalder, Urs (2019). Einbruchhemmung bei Fenstern - was wichtig ist Sicherheitsforum, 6, pp. 10-16.
Stalder, Urs (2015). (Einbruch)sichere Türen und Fenster Sicherheitsforum, 3, pp. 16-19.
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Schwarz-Platzer, Katharina; Wendeler, Corinna; Braendle, Rico; Stolz, Martin (2019). Experimental investigation of forces along anchors subjected to dynamic loading under tension and compression in field tests Canadian Geotechnical Journal, 57(5), pp. 770-782. 10.1139/cgj-2018-0144
Heintzmann, Philipp; Stolz, Martin (June 2019). Lawinenverbauungen, die auch vor Steinschlag schützen spirit biel/bienne, 2019(2), pp. 24-25. Berner Fachhochschule BFH
Schneider Feldmann AG (2018). Ankervorrichtung (00301/18)
Rentsch Partner AG (2018). Stützwerk zum Schutz vor Lawinen, Steinschlägen und Erdrutschen (00547/18)
Baraniak, P.; Stolz, Martin; Schoevaerts, B.; Wendeler, C. (May 2016). New results of high-tensile steel meshes tested in first large scale field test application In: 1st Southern African Geotechnical Conference. Sun City / South Africa. 5 - 6 May 2016.
Rist, Armin; Stolz, Martin; Heintzmann, P.; Tigges, F.; Gander, C. (2015). Machbarkeitsstudie zur Reduktion von Feinstaub oder seiner Vorläufergase mittels spezieller Strassenbeläge Schweizerischer Verband der Strassen- und Verkehrsfachleute
Roduner, A.; Flum, D.; Stolz, Martin; Gröner, E. (2015). Large-scale field tests with flexible slope stabilization systems In: XVI European conference on soil mechanics and geotechnical engineering. Edinburgh, Scotland. 13.-17.09.2015.
Stolz, Martin; Schlüchter, C.; Akçar, N.; Ivy-Ochs, S. (2015). Relevance of Quaternary alpine paleoglaciations for present day geoengineering projects (Unpublished). In: XIX INQUA Congress. Nagoya, Japan. 26.07.-02.08.2015.
Stolz, Martin; Büttner, Daniel (2015). Grundlagen für die Anforderungen an Schutzgeokunststoffe auf der Basis von neuen EN-Prüfmethoden Schweizerischer Verband der Strassen- und Verkehrsfachleute
Büttner, Daniel; Stolz, Martin; Balazs, Fonyo (2014). Forschungsprojekt über Geokunststoffe als Schutz der Abdichtung geotchnischer Bauwerke. Strasse und Verkehr, 9, pp. 30-32.
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: 6th Canadian Geohazards Conference. Kingston, Canada. 15.-18.06.2014.
Stolz, Martin; Flum, Daniel; Roduner, Armin (2014). Grossfeldversuche mit flexiblen Böschungsstabilisierungssystemen. Österreichische Ingenieur- und Architekten-Zeitschrift, 159(1–12), pp. 28-31.
Stolz, Martin (2014). Es besteht die Gefahr, dass die Technik versagt. Kommunalmagazin, 4, pp. 28-30.
Stolz, Martin (2014). Es besteht die Gefahr, dass die Technik versagt. Baublatt : aktuelle Informationen für die Schweizer Baubranche, 41, pp. 12-14. Docu Media Schweiz
Baraniak, P.; Schwarz-Platzer, Katharina; Stolz, Martin; Shevlin, T.; Roduner, A. (2014). Large-scale experiments on deformation of flexible facings used for slope stabilization In: Queen’s University, Kingston, ON. Canada. 17 June 2014.
Schwarz-Platzer, Katharina; Stolz, Martin; Rist, Armin (2014). How to Adapt the Swiss Risk Management to Mountain Developing Countries In: International Conference on Technologies for Development. EPFL. 4. - 6.6.2014.
Cala, M.; Stolz, Martin; Baraniak, P.; Rist, Armin; Roduner, A. (2013). Large scale field tests for slope stabilizations made with flexible facings (Unpublished). In: EUROCK 2013 International Symposium on Rock Mechanics for Resources, Energy and Environment. Wroclaw, Polen. 21.-26.09.2013.
Lehmann, Martin; Clerc, Gaspard; Lehringer, C.; Strahm, T.; Volkmer, Thomas; ; (2018). Investigation of the bond quality and the finger joint strength of beech glulam In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH
Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Strahm, Thomas; Niemz, Peter (2018). Improvement of ash (Fraxinus excelsior L.) bonding quality with one-component polyurethane adhesive and hydrophilic primer for load-bearing application. International Journal of Adhesion and Adhesives, 85, pp. 303-307. Elsevier 10.1016/J.IJADHADH.2018.06.017
Volkmer, Thomas; Noël, Marion; Arnold, M.; Strautmann, J. (2016). Analysis of lignin degradation on wood surfaces to create a UV-protecting cellulose rich layer. International Wood Products Journal, 7(3), pp. 156-164. Taylor & Francis 10.1080/20426445.2016.1200826
Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019
Strautmann, Jean; Noël, Marion; Volkmer, Thomas (October 2013). Surface qualification of weathered wood In: Joint COST FP0904 & FP1006 International Proceeding of the Workshop on characterization of modified wood in relation to wood bonding and coating performance. Rogla, Slovenia. 16-18 Oct 2013.
Pichelin, Frédéric (2016). Holz-Bedeutung und Verwendung In: Stuber, Thomas (ed.) Technik und Design (pp. 103-113). Bern: HEP Verlag
Ghazi Wakili, Karim; Stöckli, Thomas (4 September 2019). Slim building envelopes using vacuum glazing and high-performance insulation Journal of Physics: Conference Series, 1343, 012193. 10.1088/1742-6596/1343/1/012193
Rehm, Christiane; Sukumaran, S. P.; Kisselbach, A.; Scholz, F. (2017). Investigation of machinability of klein dried oil palm wood with regard to production of solid wood products In: 23rd International Wood Machining Seminar. Warsaw, Poland. 28.-31.05.2017.
Sukumaran, Sunil P.; Kisselbach, Andreas; Scholz, Frieder; Rehm, Christiane (2018). Investigation of machinability of kiln dried oil palm wood with regard to production of solid wood products Holztechnologie, 59(3), pp. 19-31.
Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4
Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Vallée, T.; Tannert, T.; Lehmann, Martin; Brunner, Maurice Yaw (July 2009). Probabilistic strength prediction of adhesively bonded joints composed of wooden adherends In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Lehmann, Martin; Vallée, T.; Tannert, T.; Brunner, Maurice Yaw (2009). Adhesively bonded joints composed of wooden load-bearing elements In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
Teibinger, Martin; Kolb, Hanspeter; Winter, Stefan (2015). Ein gemeinsamer Blick über die Grenzen : Anforderungen und Detaillösungen Holzbau: Die neue Quadriga, 2, pp. 13-26. Kastner AG - das medienhaus
Tellnes, Lars GF; Ganne-Chédeville, Christelle; Dias, Ana; Dolezal, Franz; Hill, Callum; Zea Escamilla, Edwin (2017). Comparative assessment for biogenic carbon accounting methods in carbon footprint of products : a review study for construction materials based on forest products. iForest : Biogeosciences and Forestry, 10(5), pp. 815-823. Italian Society of Silviculture and Forest Ecology 10.3832/ifor2386-010
Zoellig, S; Muster, M; Themessl, Adam Maximilian (September 2019). Butt-joint bonding of timber as a key technology for point-supported, biaxial load bearing flat slabs made of cross-laminated timber IOP Conference Series: Earth and Environmental Science, 323, 012144. 10.1088/1755-1315/323/1/012144
Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of cross laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20-23.08.2018.
Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of bross laminated timber In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.
Grosse, C.; Noël, Marion; Thevenon, M.; Gérardin, P. (2018). FTIR-ATR monitoring of chemical changes of thermo-chemically modified beech wood degraded by brown-rot fungus In: IRG49 - International Research Group on Wood Protection. Johannesburg, South Africa. 29.04-03.05.2018.
Shalbafan, Ali; Rheme, M.; Thoemen, H. (2016). Ultra-light particleboard: characterization of foam core layer by digital image correlation. European Journal of Wood and Wood Products, 75(1), pp. 43-53. Springer 10.1007/s00107-016-1088-0
Yoon, Yonghoon; Plummer, Christopher JG; Thoemen, Heiko; Manson, Jan-Anders E (2016). Liquid CO2 processing of solid polylactide foam precursors. Journal of Cellular Plastics, 52(2), pp. 153-174. Sage Publications 10.1177/0021955X14537662
Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037
Grosse, Charlotte; Thévenon, Marie France; Noël, Marion; Gerardin, Philippe (2016). Optimising wood chemical modification with lactic acid oligomers by screening of processing conditions and chemical additives In: 47th IRG Annual Meeting. Lisbon, Portugal. 15.-19.05.2016.
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Rautkari, Lauri; Gérardin, Philippe (2017). Influence of Water and Humidity on Wood Modification with Lactic Acid Journal of Renewable Materials, 6(3), pp. 259-269. Scrivener Publishing
Shalbafan, Ali; Thömen, Heiko (2020). Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features Applied Sciences, 10(2), p. 593. MDPI 10.3390/app10020593
Näher, Thomas; Thömen, Heiko; Burgert, Ingo (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft Zürich: Swiss Wood Innovation Network S-Win
Khojasteh-Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products European Journal of Wood and Wood Products, 78(3), pp. 593-603. Springer 10.1007/s00107-020-01519-8
Shalbafan, Ali; Nadali, Amin; Thömen, Heiko (2020). A Multifunctional Mineral Binder for Plywood Production: The Effect of Manufacturing Parameters on Bonding Quality Materials, 13(10), p. 2360. 10.3390/ma13102360
Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1
Bianchi, Sauro; Thömen, Heiko; Junginger, S.; Pichelin, Frédéric (2019). Medium density boards made of groundwood fibres: an analysis of their mechanical and physical properties European Journal of Wood and Wood Products, 77(1), pp. 71-77. Springer 10.1007/s00107-018-1367-z
Thömen, Heiko (2019). Rohstoffe effizienter einsetzen - das Modell dazu spirit biel/bienne, 1, pp. 14-15.
Thömen, Heiko; Wirth, Filipp (2018). Le bien-être – grâce à la réalité virtuelle ? spirit biel/bienne, 3, p. 25.
Thömen, Heiko (2017). Légèreté pour le mobilier spirit biel/bienne, 1, pp. 24-25.
Thömen, Heiko; Homerin, Benoit (2017). Modernste Prozessleittechnik - Integration eines mathematisch-physikalischen Modells in ein industrielles Prozessleitsystem In: 12. Holzwerkstoffkolloquium. Dresden, Germany. 14.-15.12.2017.
Thömen, Heiko; Viemeister, D. (2015). Bestimmung der Klebstoffverteilung im industriellen Holzwerkstoffprozess In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.
Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.
Benthien, Jan T.; Thömen, Heiko (2013). Effects of agglomeration and pressing process on the properties of flat pressed WPC panels Journal of Applied Polymer Science, 129(6), pp. 3710-3717. John Wiley & Sons, Ltd 10.1002/app.39155
Schmidt, Henrik; Benthien, Jan T.; Thömen, Heiko (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels European Journal of Wood and Wood Products, 71(5), pp. 591-597. Springer 10.1007/s00107-013-0719-y
Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004
Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346
Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee
Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press
Thömen, Heiko; Walther, Thomas (2010). Grundlegende Untersuchungen zur Herstellung und Struktur von Holzwerkstoffen [Textbook] . Biel/Bienne, Schweiz: Berner Fachhochschule Architektur, Holz und Bau
Thömen, Heiko; Gonin, Marc-André (2010). European master programs in wood science and technology In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-7). United Nations Economic Commission for Europe – Timber Committee
Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.
Rist, Armin; Stolz, Martin; Heintzmann, P.; Tigges, F.; Gander, C. (2015). Machbarkeitsstudie zur Reduktion von Feinstaub oder seiner Vorläufergase mittels spezieller Strassenbeläge Schweizerischer Verband der Strassen- und Verkehrsfachleute
Schnell, Dieter (2017). Zur Architekturkrise in Bern. In: Flückiger, G.; Krethlow, M.; Tobler, K. (eds.) Bern 70 (pp. 111-124). Bern: Edition Atelier
Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press
Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Brombacher, Volker; Franco, Michel; Krug, Detlef; Torres, Marco U.; Niemz, Peter (2016). Investigations on improving wood fiber insulation boards depending on mechanical pulping conditions Bauphysik, 38(5), pp. 298-308. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201610026
Brombacher, Volker; Michel, Franco; Scheiding, Wolfram; Torres Uribe, Marco; Niemz, Peter (2017). Untersuchungen zum Einfluss einer nachträglichen Wärmebehandlung auf das Dämmverhalten von Holzfaserplatten. Bauphysik, 39(2), pp. 130-134. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201710005
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.
Rädle, Wolfgang; Bühlmann, Urs; Tröbs, Hans-Martin; Zemp, Armin; Uehlinger, Urs (2016). Noise management through automated window systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Franke, Steffen; Franke, Bettina; Tuhkanen, E. (2018). Test methods for determination of design parameters of fasteners In: Cost Action FP1402 / WG3. Zurich, Switzerland. 25.-26.10.2018.
Ghazi Wakili, Karim; Stöckli, Thomas (4 September 2019). Slim building envelopes using vacuum glazing and high-performance insulation Journal of Physics: Conference Series, 1343, 012193. 10.1088/1742-6596/1343/1/012193
Uehlinger, Urs (2018). Innovationen, die die Branche bewegen : MAco zeigt Produktstudien auf der Fensterbau Glaswelt, 5, pp. 68-70. Gentner
Uehlinger, Urs (2018). Mit Erfahrung zu neuen Lizenzen Schreinerzeitung, 19, pp. 12-14.
Uehlinger, Urs; Rellstab, Christoph (2018). Mit Kleben das Holzfenster gerettet Schreinerzeitung, 34, pp. 8-811.
Uehlinger, Urs; Donzé, Marc (2017). Isolierglas flüssig verklotzen Glas+Rahmen, 10, pp. 16-18.
Hofer, Stephan; Rudin, Beat; Uehlinger, Urs (2017). System to certify windows/doors with burglary-resistant characteristics In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Mantovani, Camilla; Seidlitz, Nicolas; Wiederkehr, Martin; Uehlinger, Urs (2017). Quantitative evaluation of beech and locust dowels in contemporary window systems In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Masuch, A.; Uehlinger, Urs; Donzé, Marc (2016). Die Klotzbrücke kommt aus der Tube Glaswelt, 3, pp. 58-60. Gentner
Donzé, Marc; Uehlinger, Urs; Bühlmann, Urs; Bruderer, B. (2016). Replacing blocks for glazing windows with liquid filler In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Raedle, W.; Letsch, Bernhard; Buehlmann, U.; Uehlinger, Urs (2016). Test requirements for testing access control systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Letsch, Bernhard; Bühlmann, Urs; Uehlinger, Urs (2016). Thermal properties of access systems in field trials In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Donzé, Marc; Brunner, Maurice Yaw; Uehlinger, Urs (2016). Reinforced, insulated glazing for large windows In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Bühlmann, Urs; Tröbs, Hans-Martin; Zemp, Armin; Uehlinger, Urs (2016). Noise management through automated window systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Rädle, Wolfgang; Letsch, Bernhard; Kümmin, P.; Uehlinger, Urs; Bühlmann, Urs (2015). Thermal properties of door and window access systems In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Donzé, Marc; Kammer, D.; Uehlinger, Urs (2015). Optimal characteristics and dimensions of glazing components in building skins In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Uehlinger, Urs; Bühlmann, Urs; Kümmin, P. (2015). An ecological solution for wooden window frame enlargements In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Donzé, Marc; Uehlinger, Urs; Rellstab, Christoph; Bühlmann, Urs (2015). Structural Sealant Glazing (SSG) – reinventing the wooden window In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.
Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Greiner, Martin; Urech, P. (2017). Evaluation of in-situ measurement methods for air permeability of windows In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Vallée, T.; Tannert, T.; Lehmann, Martin; Brunner, Maurice Yaw (July 2009). Probabilistic strength prediction of adhesively bonded joints composed of wooden adherends In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Lehmann, Martin; Vallée, T.; Tannert, T.; Brunner, Maurice Yaw (2009). Adhesively bonded joints composed of wooden load-bearing elements In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4
Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.
Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008
Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung
Farajzadeh Moshtaghin, A.; Franke, Steffen; Keller, T.; Vassilopoulos, A. (June 2016). Quantification of spatial variability for transverse elastic modulus of spruce wood In: ECCOMAS Congress 2016. Kreta, Griechenland. 05.-10.06.2016.
Moshtaghin, Alireza F.; Franke, Steffen; Keller, Thomas; Vassilopoulos, Anastasios P. (2016). Random field-based modeling of size effect on the longitudinal tensile strength of clear timber Structural Safety, 58, pp. 60-68.
Moshtaghin, Alireza Farajzadeh; Franke, Steffen; Keller, Thomas; Vassilopoulos, Anastasios P. (May 2015). Spatial variability in longitudinal elastic modulus of clear timber In: EUROMECH-Colloquium 556 on Wood Mechanics. Dresden, Germany. 27-29.05.2015.
Thömen, Heiko; Viemeister, D. (2015). Bestimmung der Klebstoffverteilung im industriellen Holzwerkstoffprozess In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.
Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.
Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105
Noël, Marion; Grigsby, W.; Vitkeviciute, I.; Volkmer, Thomas (2015). Modifying wood with bio-polyesters: analysis and performance International Wood Products Journal, 6(1), pp. 14-20. Taylor & Francis 10.1179/2042645314Y.0000000086
Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.
Kolb, Hanspeter; Volkmer, Thomas (2019). Pour du bois résistant mieux au feu et à la lumière spirit biel/bienne, 2, pp. 8-9.
OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))
Franke, Tom; Volkmer, Thomas (2018). Mineralization of wood with calcium oxalate In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17-18.09.2018.
Lehmann, Martin; Clerc, Gaspard; Lehringer, C.; Strahm, T.; Volkmer, Thomas; ; (2018). Investigation of the bond quality and the finger joint strength of beech glulam In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.
Volkmer, Thomas (2018). Funktionaler Oberflächenschutz von Holzfassaden In: 24. Internationales Holzbau-Forum IHF. Garmisch-Partenkirchen, Germany. 05-07.12.2018.
Clerc, Gaspard; Brülisauer, Martina; Affolter, Samuel; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2017). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive. International Journal of Adhesion and Adhesives, 72, pp. 130-138. Elsevier 10.1016/j.ijadhadh.2016.09.008
Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15.
Volkmer, Thomas (2017). Le bois, résistant au feu et durable, grâce aux minéraux cristallisés spirit biel/bienne, 2, p. 26.
Volkmer, Thomas; Lehmann, Martin; Clerc, Gaspard (2017). Brettschichtholz aus Buche: Keilzinkenverbindung und Flächenverklebung In: 23. Internationales Holzbau-Forum. Garmisch-Partenkirchen, Deutschland. 06.-08.12.2017.
Volkmer, Thomas; Gyr, R.; Kaiser, P. (2017). Methoden der Holzmodifikation zur Verbesserung der Dauerhaftigkeit und des Brandschutzes In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient, geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.
Volkmer, Thomas; Noël, Marion; Arnold, M.; Strautmann, J. (2016). Analysis of lignin degradation on wood surfaces to create a UV-protecting cellulose rich layer. International Wood Products Journal, 7(3), pp. 156-164. Taylor & Francis 10.1080/20426445.2016.1200826
Clerc, Gaspard; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2016). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.
Noël, Marion; Grigsby, W.; Vitkeviciute, I.; Volkmer, Thomas (2015). Modifying wood with bio-polyesters: analysis and performance International Wood Products Journal, 6(1), pp. 14-20. Taylor & Francis 10.1179/2042645314Y.0000000086
Sonderegger, Walter; Glaunsinger, Martin; Mannes, David; Volkmer, Thomas; Niemz, Peter (2015). Investigations into the influence of two different wood coatings on water diffusion determined by means of neutron imaging European Journal of Wood and Wood Products, 73(6), pp. 793-799. Springer 10.1007/s00107-015-0951-8
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M. I.; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2015). Distribution of Silica-Coated Silver/Gold Nanostars in Soft- and Hardwood Applying SERS-Based Imaging Langmuir, 32(1), pp. 274-283. American Chemical Society (ACS) 10.1021/acs.langmuir.5b03617
Noël, Marion; Grigsby, Warren J.; Volkmer, Thomas (2015). Evaluating The Extent of Bio-Polyester Polymerization in Solid Wood by Thermogravimetric Analysis Journal of Wood Chemistry and Technology, 35(5), pp. 325-336. Taylor & Francis 10.1080/02773813.2014.962154
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter; Sonderegger, Walter (2015). Investigations on water vapour permeability of wood coatings for exterior use. Bauphysik, 37(3), pp. 186-195. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201510020
Campiche, Sophie; Ganne-Chédeville, Christelle; Volkmer, Thomas; Grand, Emilie; Werner, Inge; Ferrari, Benoit J.-D. (2015). Current knowledge and evaluation of potential toxicity for soil organisms Lausanne: Centre Ecotox
Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.
Volkmer, Thomas; Lorenz, T.; Hass, P.; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the mechanical and physical properties of common oak wood. European Journal of Wood and Wood Products, 72(2), pp. 249-259. Springer 10.1007/s00107-014-0777-9
Noël, Marion; Grigsby, Warren; Volkmer, Thomas (2014). Investigating the Viscoelastic Properties and Mechanical Performance of Wood Modifi ed by Biopolyester Treatments. Journal of Renewable Materials, 2(4), pp. 291-305. Scrivener Publishing 10.7569/JRM.2014.634118
Volkmer, Thomas; von Arx, Urs; Moser, Regula; Hass, Philipp; Lorenz, Thomas; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the optical appearance and the emission behaviour of oak wood Bauphysik, 36(2), pp. 80-86. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410021
Volkmer, Thomas; Glaunsinger, Martin; Mannes, David; Niemz, Peter (2014). Investigations on the influence of moisture on the adhesion strength of surface coating of wood Bauphysik, 36(6), pp. 337-342. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410041
Volkmer, Thomas; Franke, Bettina; Schusser, Anna (2014). Analysis of the Penetration of Adhesives at Finger-Joints in Beech Wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.
Lehmann, Martin; Volkmer, Thomas (2014). Investigation of the bond quality of hardwoods with micro structured surfaces In: 68th FPS International Convention. Quebec City, Canada. 10.-13.08.2014.
Lehmann, Martin; Volkmer, Thomas (2014). Influence of micro structured surface on the bond quality of hardwood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.
Strautmann, Jean; Noël, Marion; Volkmer, Thomas (October 2013). Surface qualification of weathered wood In: Joint COST FP0904 & FP1006 International Proceeding of the Workshop on characterization of modified wood in relation to wood bonding and coating performance. Rogla, Slovenia. 16-18 Oct 2013.
Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019
Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard; Lehmann, Martin (2012). Measures for the maintenance of untreated wood facades In: World Conference on Timber Engineering (WCTE 2012). Auckland, New Zealand. 15-19.07.2012.
Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.
Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard (2010). Nachhaltige Reinigung von unbehandelten Holzfassaden – Ergebnisse aus laufenden Forschungsprojekten In: 42. SAH Fortbildungskurs. SAH
Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2010). Reinigung von unbehandelten Holzfassaden Holzbaumarktschweiz : Fachmagazin für Holzbau, Architektur, Innenausbau, Produktion, 5, pp. 12-14.
Volkmer, Thomas; Höltschi, Christoph (2009). Holzfassaden verändern ihre Farbe Applica : Die Zeitschrift für das Maler- und Gipsergewerbe, 5, pp. 12-16. Schweizerischer Maler- und Gipserunternehmer-Verband ; Schweizerischer Maler- und Gipsermeister-Verband
Volkmer, Thomas; Höltschi, Christoph (2009). Zahn der Zeit Immobilia : Zeitschrift für die Immobilienwirtschaft(6), pp. 37-38. SVIT Verlag AG
Volkmer, Thomas (2007). Schimmelpilze auf beschichteten Holzfassaden: chemische und physikalische Einflussfaktoren (Dissertation, Albert-Ludwigs-Universität Freiburg)
Volkmer, Thomas; Landmesser, H. (2007). Pilze auf Holzfassaden Berner Fachhochschule Architektur, Holz und Bau
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839
Thömen, Heiko; Walther, Thomas (2010). Grundlegende Untersuchungen zur Herstellung und Struktur von Holzwerkstoffen [Textbook] . Biel/Bienne, Schweiz: Berner Fachhochschule Architektur, Holz und Bau
Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4
Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641
Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4
Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757
Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641
Frei, Reto; Courant, Thibaut; Wodrich, Matthew D.; Waser, Jerome (2014). General and Practical Formation of Thiocyanates from Thiols. Chemistry - A European Journal, 21(6), pp. 2662-2668. Wiley-Blackwell - STM 10.1002/chem.201406171
Frei, Reto; Wodrich, Matthew D.; Hari, Durga Prasad; Borin, Pierre-Antoine; Chauvier, Clément; Waser, Jérôme (2014). Fast and Highly Chemoselective Alkynylation of Thiols with Hypervalent Iodine Reagents Enabled through a Low Energy Barrier Concerted Mechanism. Journal of the American Chemical Society, 136(47), pp. 16563-16573. American Chemical Society (ACS) 10.1021/ja5083014
Geyer, Christoph; Wehle, Barbara; Müller, Andreas (5 April 2019). Monitoring of water contents and temperatures of historical Walls with interior Insulation in Switzerland In: International WTA - PRECOM³OS symposium. Leuven, Belgium.
Wehle, Barbara; Geyer, Christoph; Melian Hernandez, Amabel (12 March 2019). Schall- und Luftdichthe¡t von Fenstern in der Renovation In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 377-388). Biel: FORUM HOLZBAU
Geyer, Christoph; Wehle, Barbara; Melian Hernandez, Amabel (12 March 2019). Ein neues Verfahren zur Berechnung der dynamischen Wärmekapazität von Holzbalkendecken In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 151-160). Biel: FORUM HOLZBAU
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (22 January 2019). Feuchteschutz sanierter Bestandswände mit Innendämmung Vergleich von Prognoseberechnung und Messung der Feuchtegehalte und Temperaturprofile In: Kolloquium Erhaltung von Bauwerken. Ostfildern, Deutschland. 22.-23.01.2019.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Gariglio, Federico (2018). Bestimmen, vergleichen, umrechnen : Vor-Ort-Methoden zum Messen des Wasseraufnahmekoeffizienten von Außenputzen B+B Bauen im Bestand, 7, pp. 46-51. Rudolf Müller
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Melian Hernandez, Amabel (2018). In situ measurement results for air permeability and sound insulation of historical windows In: 14th Conference on Advanced Building Skins. Bern, Switzerland. 01.-02.10.2018.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (2017). Messung der Wasseraufnahme historischer Putze. Vergleich verschiedener In-situ-Messerverfahren mit Labormessmethoden. Bauphysik, 39(4), pp. 245-252. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.20170025
Geyer, Christoph; Müller, Andreas; Wehle, Barbara; Greiner, Martin; Urech, P. (2017). Evaluation of in-situ measurement methods for air permeability of windows In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (2017). Was leisten In-situ-Messmethoden der Wasseraufnahmekoeffizienten von Aussenputzen historischer Gebäude? In: 28. Hanseatische Sanierungstage. Heringsdorf, Deutschland. 02.-04.11.2017.
Wehle, Barbara; Geyer, Christoph (2014). Alte Fenster nicht einfach nur austauschen Glaswelt, 3, pp. 84-87. Gentner
Wehle, Barbara; Geyer, Christoph (2014). Den Schutz verbessern, die Schönheit bewahren Bauen im Bestand B + B, 37(3), pp. 58-61.
Wehle, Barbara; Geyer, Christoph (2014). Energetische und schalltechnische Sanierung von Wohngebäuden der 1950er bis 1970er Jahre In: 18. Status-Seminar «Forschen für den Bau im Kontext von Energie und Umwelt». Zürich, Switzerland. 04.-05.09.2014.
Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1
Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee
Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.
Baraniak, P.; Stolz, Martin; Schoevaerts, B.; Wendeler, C. (May 2016). New results of high-tensile steel meshes tested in first large scale field test application In: 1st Southern African Geotechnical Conference. Sun City / South Africa. 5 - 6 May 2016.
Schwarz-Platzer, Katharina; Wendeler, Corinna; Braendle, Rico; Stolz, Martin (2019). Experimental investigation of forces along anchors subjected to dynamic loading under tension and compression in field tests Canadian Geotechnical Journal, 57(5), pp. 770-782. 10.1139/cgj-2018-0144
Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD
Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004
Campiche, Sophie; Ganne-Chédeville, Christelle; Volkmer, Thomas; Grand, Emilie; Werner, Inge; Ferrari, Benoit J.-D. (2015). Current knowledge and evaluation of potential toxicity for soil organisms Lausanne: Centre Ecotox
Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346
Mantovani, Camilla; Seidlitz, Nicolas; Wiederkehr, Martin; Uehlinger, Urs (2017). Quantitative evaluation of beech and locust dowels in contemporary window systems In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.
Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757
Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.
Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679
Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.
Wieland, Stefanie; Properzi, Milena; Pichelin, Frédéric; Gfeller, Balz (2005). Einsatz des linearen Vibrationsschweissens in der Holzindustrie In: Frauenhofer WKI Workshop: Klebstoffe für Holzprodukte. Braunschweig, Germany. 10-11 Nov 2005.
Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004
Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa
Willemin, Stéphane (2018). La façade ventilée In: S-Win-Tagung 2018, Construction en bois: assurer la durabilité. Yverdon-les-Bains, Switzerland. 18.04.2018.
Bachmann, Eduard; Sigrist, Christophe (2014). Complex timber structures In: Gramazio, F.; Kohler, M.; Willmann, J. (eds.) The robotic touch: how robots change architecture (pp. 364-377). Zürich: Park Books
Willmann, Jan; Knauss, Michael; Bonwetsch, Tobias; Apolinarska, Anna Aleksandra; Gramazio, Fabio; Kohler, Matthias (2016). Robotic timber construction : Expanding additive fabrication to new dimensions Automation in construction, 2016(61), pp. 16-23.
Teibinger, Martin; Kolb, Hanspeter; Winter, Stefan (2015). Ein gemeinsamer Blick über die Grenzen : Anforderungen und Detaillösungen Holzbau: Die neue Quadriga, 2, pp. 13-26. Kastner AG - das medienhaus
Dietsch, Philipp; Franke, Steffen; Franke, Bettina; Gamper, Andreas; Winter, Stefan (2014). Methods to determine wood moisture content and their applicability in monitoring concepts. Journal of Civil Structural Health Monitoring, 5(2), pp. 115-127. Springer 10.1007/s13349-014-0082-7
Thömen, Heiko; Wirth, Filipp (2018). Le bien-être – grâce à la réalité virtuelle ? spirit biel/bienne, 3, p. 25.
Frei, Reto; Courant, Thibaut; Wodrich, Matthew D.; Waser, Jerome (2014). General and Practical Formation of Thiocyanates from Thiols. Chemistry - A European Journal, 21(6), pp. 2662-2668. Wiley-Blackwell - STM 10.1002/chem.201406171
Frei, Reto; Wodrich, Matthew D.; Hari, Durga Prasad; Borin, Pierre-Antoine; Chauvier, Clément; Waser, Jérôme (2014). Fast and Highly Chemoselective Alkynylation of Thiols with Hypervalent Iodine Reagents Enabled through a Low Energy Barrier Concerted Mechanism. Journal of the American Chemical Society, 136(47), pp. 16563-16573. American Chemical Society (ACS) 10.1021/ja5083014
Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Nyffenegger, Franziska; Yavuz, V.; Akçar, N.; Ivy-Ochs, S.; Fredin, O.; Schlunegger, F. (2015). Rearward landsliding in sensitive clays: February 2011 massive failures at the Cöllolar coalfields, eastern Turkey (Unpublished). In: 13th Swiss Geoscience Meeting. Basel. 20.-21.11.2015.
Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859
Yoon, Yonghoon; Plummer, Christopher JG; Thoemen, Heiko; Manson, Jan-Anders E (2016). Liquid CO2 processing of solid polylactide foam precursors. Journal of Cellular Plastics, 52(2), pp. 153-174. Sage Publications 10.1177/0021955X14537662
Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.
Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8
Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.
Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648
Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310
Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419
Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007
Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001
Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.
Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.
Niemz, Peter; Zauner, M.; Brunner, A. J. (2015). In - situ Synchrotron based micro - tomography and acoustic emission measurement of Norway spruce samples under tensile load In: 19th. International Symposium on Nondestructive Testing and Evaluation of wood. Rio de Janeiro, Brazil. 22.-25.09.2015.
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Brunner, Andreas J.; Baensch, Franziska; Sause, Markus G. R.; Zauner, Michaela; Niemz, Peter (2015). Schallemissionsanalyse und Synchrotron- basierte Mikrotomografie an verklebten Miniatur-Zugprüfkörpern aus Fichtenholz In: 20. Kolloquium Schallenemission. Garmisch-Partenkirchen, Germany. 18.-19.06.2015.
Tellnes, Lars GF; Ganne-Chédeville, Christelle; Dias, Ana; Dolezal, Franz; Hill, Callum; Zea Escamilla, Edwin (2017). Comparative assessment for biogenic carbon accounting methods in carbon footprint of products : a review study for construction materials based on forest products. iForest : Biogeosciences and Forestry, 10(5), pp. 815-823. Italian Society of Silviculture and Forest Ecology 10.3832/ifor2386-010
Rädle, Wolfgang; Bühlmann, Urs; Tröbs, Hans-Martin; Zemp, Armin; Uehlinger, Urs (2016). Noise management through automated window systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.
Zerbst, David; Baensch, Franziska; Pfriem, Alexander; Niemz, Peter (2016). Visko-elastisches Verhalten von Holz-Klebstoff-Verbindungen unter zyklischer Zug-Druck-Belastung. Bautechnik, 93(11), pp. 795-800. Wiley-Blackwell - STM 10.1002/bate.201500102
Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105
Rist, Armin; Zmeeva, Natalia (June 2019). Sonne und Poren für saubere Luft spirit biel/bienne, 2019(2), pp. 28-29. Berner Fachhochschule BFH
Zock, P.; Bachmann, Eduard; Sitzmann, S.; Sigrist, Christophe (2014). Neue Verbindung für komplexe, robotergefertigte Holzstrukture In: S-Win Tagung. 46. Fortbildungskurs - Holzverbindungen mit Klebstoffen für die Bauanwendung. Weinfelden, Switzerland. 21.-22.10.2014.
Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.
Zoellig, S; Muster, M; Themessl, Adam Maximilian (September 2019). Butt-joint bonding of timber as a key technology for point-supported, biaxial load bearing flat slabs made of cross-laminated timber IOP Conference Series: Earth and Environmental Science, 323, 012144. 10.1088/1755-1315/323/1/012144
Zoellig, Stefan; Frangi, Andrea; Franke, Steffen; Muster, Marcel (August 2016). Timber structures 3.0 - New technology for multi-axial, slim, high performance timber structures In: WCTE 2016. Wien, Österreich. 22.-25.08.2016.
Doerfel, Marion; Sinclair, M.; Zyryanov, V.; Gerlach, J. (2015). Education, science and practice: international student workshops focus on successful infrastructure solutions to improve VRUs' safety In: Internationale Konferenz. Seoul, Southkorea. 01.11.2015.
Zürcher, Ernst (2016). Die Bäume und das Unsichtbare: erstaunliche Erkenntnisse aus der Forschung AT Verlag
Zürcher, Ernst (2016). Les arbres, entre visible et invisible: s'étonner, comprendre, agir Arles: Actes Sud
Mikulecky, Miroslav; Zürcher, Ernst (2014). Old Forestry Traditions and Modern Chronobiological Research: Lunar-Cycle-Related Sowing Time Influences Effectively Initial Plant Growth Global Journal of Botanical Science, 2(1), pp. 32-36. 10.12974/2311-858X.2014.02.01.5
Zürcher, Ernst; Schlaepfer, Rodolphe (2014). Lunar Rhythmicities in the Biology of Trees, Especially in the Germination of European Spruce (Picea abies Karst.): A New Statistical Analysis of Previously Published Data Journal of Plant Studies, 3(1), pp. 103-113. 10.5539/jps.v3n1p103
Zürcher, Ernst (2014). Trees in the Mystery of Space and Time - an Essay Elemente der Naturwissenschaft, 101, pp. 35-63.
Zürcher, Ernst (June 2011). Dufthölzer - Bäume an deren Duft erkennen In: Schweizerische Beiträge zur Dendrologie. Zürich: Schweizerischen Dendrologischen Gesellschaft (SDG)
Zürcher, Ernst (2011). Plants and the moon - Traditions and phenomena HerbalEGram, 8(4), pp. 1-14. American botanical council
Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2
Zürcher, Ernst (2010). Holzgeruch – eine unbeachtete, jedoch wirksame Eigenschaft Bündner Wald, 6, pp. 69-74. Gasser
Zürcher, Ernst; Rogenmoser, Christian (2010). Considering reversible variations in wood properties : possible applications in the choice of the tree-felling date ? In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.
Zürcher, Ernst; Schlaepfer, R.; Giudici, F. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste
Zürcher, Ernst; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Zürcher, Ernst; Rogenmoser, Christian; Quartney, Gladys A. (November 2009). Wenig bekannte Holzarten Westafrikas Holzforschung Schweiz, 2, pp. 12-14. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Brunner, Maurice Yaw; Zürcher, Ernst (2009). Holzbrückenbau in Afrika: Neue Wege für Ghana Schweizer Holzbau, pp. 19-21.
Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.
Zürcher, Ernst; Quartey, G.A (2008). Durability investigations of lesser-known Ghanaian wood species In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.
Zürcher, Ernst; Rogenmoser, C. (2008). Exploring biodiversity at the wood level – Timber identification and structure-properties relationships In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.
Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST
Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST
Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003
Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5
Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Volkmer, Thomas; von Arx, Urs; Moser, Regula; Hass, Philipp; Lorenz, Thomas; Niemz, Peter (2014). Influence of heat pressure steaming (HPS) on the optical appearance and the emission behaviour of oak wood Bauphysik, 36(2), pp. 80-86. Wiley-Blackwell - STM ; Ernst & Sohn 10.1002/bapi.201410021
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003
Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).
Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.
Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12.
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Rautkari, Lauri (2015). Reducing the moisture sensitivity of linear friction welded birch ( Betula pendula L.) wood through thermal modification Journal of Adhesion Science and Technology, 29(22), pp. 2461-2474. Taylor & Francis 10.1080/01694243.2015.1069721
Ruponen, Jussi; Čermák, Petr; Rhême, Martin; Miettinen, Arttu; Rohumaa, Anti; Rautkari, Lauri (2015). Influence of Welding Time on Tensile-Shear Strength of Linear Friction Welded Birch (Betula pendula L.) Wood BioResources, 10(2), pp. 3481-3491. North Carolina State University
