Department of Architecture, Wood and Civil Engineering > Bereich Forschung & Entwicklung, Dienstleistungen und Weiterbildung

Bern University of Applied Sciences (4472)
- Department of Architecture, Wood and Civil Engineering (500)
  - Bereich Forschung & Entwicklung, Dienstleistungen und Weiterbildung (375)
    - Institut für Holzbau, Tragwerke und Architektur (107)
    - Institut für Siedlungsentwicklung und Infrastruktur (17)
    - Institut für Werkstoffe und Holztechnologie (235)
    - Institut für digitale Holz- und Bauwirtschaft (9)

Group by: Date | Name | Item Type | Refereed | No Grouping

Number of items at this level: 1024.

Abegg, Daniel

Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641

Abela, R.

Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society

Adibekian, Alexander

Aeh, K.

Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.

Affolter, B.

Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5

Aghaegbusi Mgbemene, C.

Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.

Akçar, N.

Stolz, Martin; Schlüchter, C.; Akçar, N.; Ivy-Ochs, S. (2015). Relevance of Quaternary alpine paleoglaciations for present day geoengineering projects (Unpublished). In: XIX INQUA Congress. Nagoya, Japan. 26.07.-02.08.2015.

Nyffenegger, Franziska; Yavuz, V.; Akçar, N.; Ivy-Ochs, S.; Fredin, O.; Schlunegger, F. (2015). Rearward landsliding in sensitive clays: February 2011 massive failures at the Cöllolar coalfields, eastern Turkey (Unpublished). In: 13th Swiss Geoscience Meeting. Basel. 20.-21.11.2015.

Akçar, Naki

Nyffenegger, Franziska; Akçar, Naki; Yavuz, Vural; Ivy-Ochs, Susan; Fredin, Ola; Korkut, Mehmet; Margreth, Annina; Gylland, Anders Samstad; Schlunegger, Fritz (2019). Liquefaction of freshwater carbonates led to the February 10, 2011, landslide at the Çöllolar coalfield, eastern Turkey Geomorphology, 347, p. 106859. Elsevier 10.1016/j.geomorph.2019.106859

Amen, Carlos

Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH

Ammann, Paul

Ammann AG (2004). Connecting element (EP 1 437 040 A1)

Ammann, S.

Ammann, Samuel

Ammann, Samuel; Niemz, Peter (2015). Specific fracture energy at glue joints in European beech wood International Journal of Adhesion and Adhesives, 60, pp. 47-53. Elsevier 10.1016/j.ijadhadh.2015.03.007

Ammann, Samuel D.

Niemz, Peter; Ammann, Samuel D. (2016). Mechanical performance of glue joints in structural hardwood elements In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.

Amstutz Hugi, Corinne

Müller, Andreas; Amstutz Hugi, Corinne (1 May 2019). Methoden der Zustandserfassung Wir Holzbauer, 4, pp. 30-33.

Müller, Andreas (1 March 2019). Zustandserfassung von Holzkonstruktionen Wir Holzbauer, 3, pp. 30-33.

Andrew, Akwasi

Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST

Anheuser, Kilian

Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.

Appiah-Kubi, Emmanuel

Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.

Arietano, L.

Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019

Attaf, B.

Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034

Aydın, Tuğba Yılmaz

Güntekin, Ergün; Aydın, Tuğba Yılmaz; Niemz, Peter (2015). Prediction of compression properties in three orthotropic directions for some important Turkish wood species using ultrasound BioResources, 10(4), pp. 7252-7262.

Ayrilmis, Nadir

Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346

Bachmann, Eduard

Schaller, M.; Bachmann, Eduard; Pauli, Bernhard; Berli, C.; von Fehrn, H.; Müller, Alexandra; Markovic, Jelena (2015). Computertomographie für Rundholz: Blick ins Stamminnere Wald und Holz, 96(10), pp. 21-24. Waldwirtschaft Schweiz

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Bachmann, Eduard (2014). Fensterwerkzeuge - Dünne Schicht - Grosse Wirkung In: Fensterbau/frontale 2014: Innovationen aus der Schweiz. Nürnberg, Germany. 27.03.2014.

Bachmann, Eduard (2014). Auf Messers Schneide: Werkzeuge mit dünnen Schichten In: Fenster-Türen-Treff 2014. Schadmin, Austria. 13.-14.03.2014.

Bachtiar, Erik V.

Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104

Badoux, François

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

Baensch, Franziska

Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072

Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152

Brunner, Andreas J.; Baensch, Franziska; Sause, Markus G. R.; Zauner, Michaela; Niemz, Peter (2015). Schallemissionsanalyse und Synchrotron- basierte Mikrotomografie an verklebten Miniatur-Zugprüfkörpern aus Fichtenholz In: 20. Kolloquium Schallenemission. Garmisch-Partenkirchen, Germany. 18.-19.06.2015.

Balazs, Fonyo

Büttner, Daniel; Stolz, Martin; Balazs, Fonyo (2014). Forschungsprojekt über Geokunststoffe als Schutz der Abdichtung geotchnischer Bauwerke. Strasse und Verkehr, 9, pp. 30-32.

Barbu, Marius

Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee

Barbu, Marius C.

Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press

Baumann, J. M.

Beetschen, Mirko

Kolb, Hanspeter; Beetschen, Mirko (2019). Vielfalt im Holzbau Die schönsten Seiten des Kantons Bern: Vol. 26. Bern: Stämpfli Verlag AG

Benthien, Jan T.

Benthien, Jan T.; Thömen, Heiko (2013). Effects of agglomeration and pressing process on the properties of flat pressed WPC panels Journal of Applied Polymer Science, 129(6), pp. 3710-3717. John Wiley & Sons, Ltd 10.1002/app.39155

Schmidt, Henrik; Benthien, Jan T.; Thömen, Heiko (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels European Journal of Wood and Wood Products, 71(5), pp. 591-597. Springer 10.1007/s00107-013-0719-y

Berli, C.

Beyer, M.

Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279

Beyer, Mario

Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001

Bianchi, Sauro

Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832

Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27.

Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105

Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21.

Bieri, N.

Bockel, S.

Bockel, Stefan

Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1

Bocquet, J.-F.

Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.

Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services

Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037

Brodard, P.

Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.

Brombacher, Volker

Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002

Bruderer, B.

Donzé, Marc; Uehlinger, Urs; Bühlmann, Urs; Bruderer, B. (2016). Replacing blocks for glazing windows with liquid filler In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.

Brunner, A. J.

Niemz, Peter; Zauner, M.; Brunner, A. J. (2015). In - situ Synchrotron based micro - tomography and acoustic emission measurement of Norway spruce samples under tensile load In: 19th. International Symposium on Nondestructive Testing and Evaluation of wood. Rio de Janeiro, Brazil. 22.-25.09.2015.

Brunner, A.J.

Brunner, A.J.; Clerc, Gaspard; Niemz, Peter (2018). Acoustic emission monitoring of adhesively bonded wood joints under quasistatic and cyclic fatigue mode II flexure loads using end-notch-flexure specimens In: 33rd European Conference on Acoustic Emission Testing. Senlis, France. 12-14.09.2018.

Brunner, Andreas J

Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung

Brunner, Andreas J.

Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008

Brunner, Maurice Yaw

Donzé, Marc; Brunner, Maurice Yaw; Uehlinger, Urs (2016). Reinforced, insulated glazing for large windows In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.

Scharmacher, Florian; Müller, Andreas; Brunner, Maurice Yaw (2014). Timber Bridges with asphalt - surfacing technical specifications In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759

Lehmann, Martin; Brunner, Maurice Yaw; Kraft, Sebastian (2010). Higher load bearing capabilities with elastic glue lines for glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.

Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.

Vallée, T.; Tannert, T.; Lehmann, Martin; Brunner, Maurice Yaw (July 2009). Probabilistic strength prediction of adhesively bonded joints composed of wooden adherends In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.

Brunner, Maurice Yaw; Lehmann, Martin (2009). Frp-prestressed timber : losses in prestressing force due to elastic , creep and shrinkage deformations of the timber In: FRPRCS. Sydney, Australia. 13-15 Jul 2009.

Brunner, Maurice Yaw; Schnüriger, Marco; Roemer, Michael (2009). Holz-Beton-Platten mit Klebeverbund In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 705-710). Biberach: Institut für Holzbau Hochschule

Brunner, Maurice Yaw; Zürcher, Ernst (2009). Holzbrückenbau in Afrika: Neue Wege für Ghana Schweizer Holzbau, pp. 19-21.

Donzé, Marc; Brunner, Maurice Yaw (2009). Elastisch nachgiebige Klebefuge für Brettschichtholz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 819-824). Biberach, Deutschland: Institut für Holzbau Hochschule Biberach

Lehmann, Martin; Vallée, T.; Tannert, T.; Brunner, Maurice Yaw (2009). Adhesively bonded joints composed of wooden load-bearing elements In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.

GEISTLICH & SOEHNE AG (2009). Glued laminated beam (EP2090413 (A1))

Brunner, Maurice Yaw; Donzé, Marc (2008). GLULAM REBORN : A flexible adhesive interface to increase the bending resistance of glulam Applied Sciences, p. 2008.

Brunner, Maurice Yaw; Schnueriger, M.; Lehmann, Martin (2008). Strengthening glulam beams with prestressed multilayer FRP carbon laminates In: Final Conference COST E34 Bonding of Timber (2008). Sopron, Hungary. 06.-07.05.2008.

Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari

Brunner, Maurice Yaw; Engels, Isabel (2007). The search for an adhesive to grant glulam ductile behaviour In: SEMC International Conference. 10-12 Sep 2007.

Brunner, Maurice Yaw (2006). On the increasing importance of tensile loading perpendicular to the grain in some new timber products In: World Conference on Timber Engineering. Portland, USA. 06.-10.08.2006.

Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))

Brunner, Maurice Yaw; Schnueriger, M. (2004). Strengthening of timber beams with prestressed artificial fibers: development of a suitable adhesive technology In: International Symposium on Advanced Timber and Timber-composites Elements for Building (pp. 45-50). San Michele all'Andige, Italy: CNR-Ivalsa

Bueche, Nicolas

Bueche, Nicolas; Dumont, A.-G. (2016). Paquet de recherche PLANET : RS-5: Modèle global d'évaluation. In: contribution. Bericht 1595 (pp. 1-137). Bern: Bundesamt für Strassen ASTRA

Bueche, Nicolas; Dumont, A.-G.; Ould Henia, M. (2016). Paquet de recherche PLANET : RS-3: Formulation et optimisation des performances. In: contribution (pp. 1-109). Bern: Bundesamt für Strassen ASTRA

Bues, Claus-Thomas

Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002

Buividé, Indre

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Burgert, Ingo

Näher, Thomas; Thömen, Heiko; Burgert, Ingo (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft Zürich: Swiss Wood Innovation Network S-Win

Burud, I.

Noël, Marion; Grosse, Charlotte; Burud, I.; Gérardin, Philippe (2018). Biopolyesters for wood modification : technical validation towards implementation In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.

Bühlmann, Urs

Rädle, Wolfgang; Bühlmann, Urs; Tröbs, Hans-Martin; Zemp, Armin; Uehlinger, Urs (2016). Noise management through automated window systems In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.

Uehlinger, Urs; Bühlmann, Urs; Kümmin, P. (2015). An ecological solution for wooden window frame enlargements In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.

Donzé, Marc; Uehlinger, Urs; Rellstab, Christoph; Bühlmann, Urs (2015). Structural Sealant Glazing (SSG) – reinventing the wooden window In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.

Büttner, Daniel

Stolz, Martin; Büttner, Daniel (2015). Grundlagen für die Anforderungen an Schutzgeokunststoffe auf der Basis von neuen EN-Prüfmethoden Schweizerischer Verband der Strassen- und Verkehrsfachleute

Büttner, Daniel; Stolz, Martin; Balazs, Fonyo (2014). Forschungsprojekt über Geokunststoffe als Schutz der Abdichtung geotchnischer Bauwerke. Strasse und Verkehr, 9, pp. 30-32.

Campbell, J.M.

Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839

Canoine, Benoît

Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.

Canoine, Benoît (2019). Le bois densifié, un bois «exotique» local spirit biel/bienne, 2, p. 23.

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Carrillo-Parra, Artemio

Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.

Centre, Collections

Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.

Cerato, Luca

Clenin, Reto

Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus

Clerc, Gaspard

Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Lehmann, Martin; Clerc, Gaspard; Lehringer, C.; Strahm, T.; Volkmer, Thomas; ; (2018). Investigation of the bond quality and the finger joint strength of beech glulam In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.

Volkmer, Thomas; Lehmann, Martin; Clerc, Gaspard (2017). Brettschichtholz aus Buche: Keilzinkenverbindung und Flächenverklebung In: 23. Internationales Holzbau-Forum. Garmisch-Partenkirchen, Deutschland. 06.-08.12.2017.

Clénin, Reto

Lehmann, Martin; Clénin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Baublatt : aktuelle Informationen für die Schweizer Baubranche(41), pp. 28-30. Docu Media Schweiz

Conedera, M.

Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2

Zürcher, Ernst; Schlaepfer, R.; Giudici, F. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste

Zürcher, Ernst; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH

Conzett, Jürg

Cremonini, Corrado

Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.

Curling, Simon F.

Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.

Delmotte, L.

Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088

Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020

Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444

Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.

Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648

Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419

Delmotte, Luc

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007

Depnering, Tobias

Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1

Despres, A.

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097

Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.

Donzé, Marc

Donzé, Marc; Brunner, Maurice Yaw; Uehlinger, Urs (2016). Reinforced, insulated glazing for large windows In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.

Donzé, Marc; Kammer, D.; Uehlinger, Urs (2015). Optimal characteristics and dimensions of glazing components in building skins In: International Conference of Advanced Building Skins. Bern, Switzerland. 03.-04.11.2015.

GEISTLICH & SOEHNE AG (2009). Glued laminated beam (EP2090413 (A1))

Brunner, Maurice Yaw; Donzé, Marc (2008). GLULAM REBORN : A flexible adhesive interface to increase the bending resistance of glulam Applied Sciences, p. 2008.

Duchanois, G.

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939

Duchanois, Gilles

Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).

Dumont, A.-G.

Bueche, Nicolas; Dumont, A.-G. (2016). Paquet de recherche PLANET : RS-5: Modèle global d'évaluation. In: contribution. Bericht 1595 (pp. 1-137). Bern: Bundesamt für Strassen ASTRA

Ehrhart, Thomas

Ehrhart, Thomas; Lehmann, Martin; Frangi, Andrea (2019). European beech ( Fagus sylvatica L .) glued laminated timber : Lamination strength grading , production and mechanical properties In: International Scientific Conference on Hardwood Processing, ISCHP 19 (pp. 252-267). TU Delft

Engels, Isabel

Brunner, Maurice Yaw; Engels, Isabel (2007). The search for an adhesive to grant glulam ductile behaviour In: SEMC International Conference. 10-12 Sep 2007.

Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))

Enlund, Nils

Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries

Ettlin, Toni

Ammann AG (2004). Connecting element (EP 1 437 040 A1)

Fankhause, Urs

Fankhauser, Urs

Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))

Felder, R.

Fischer, Kurt

Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management

Flum, D.

Roduner, A.; Flum, D.; Stolz, Martin; Gröner, E. (2015). Large-scale field tests with flexible slope stabilization systems In: XVI European conference on soil mechanics and geotechnical engineering. Edinburgh, Scotland. 13.-17.09.2015.

Flum, Daniel

Stolz, Martin; Flum, Daniel; Roduner, Armin (2014). Grossfeldversuche mit flexiblen Böschungsstabilisierungssystemen. Österreichische Ingenieur- und Architekten-Zeitschrift, 159(1–12), pp. 28-31.

Foroughbakhch, Rahim

Frangi, Andrea

Franke, Bettina

Franke, Steffen; Franke, Bettina; Müller, Andreas; Heubuch, Sebastian Pascal (4 December 2019). Stabdübelverbindungen und eingeklebte Gewindestangen in Buchen-BSH In: 25. Internationales Holzbau-Forum (IHF 2019). Congress Innsbruck Österreich. 4. - 6.12.2019.

Heubuch, Sebastian Pascal; Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Eingeklebte Gewindestangen in Buchen BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.

Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Stabdübelverbindungen in Buchen-BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoff. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.

Franke, Steffen; Franke, Bettina (22 October 2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektpartner In: 51. Fortbildungskurs S-WIN: Hochleistungs werkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.

Müller, Andreas; Franke, Bettina (2019). Prüfung von geklebten Vollholzprodukten Wir Holzbauer, 5, pp. 26-29.

Müller, Andreas; Franke, Bettina (5 June 2019). Zustandserfassung - Einführung und Methodik In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen; Müller, Andreas (5 June 2019). Bewertung der Holzfeuchte und deren Auswirkungen In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Steffen; Franke, Bettina (5 June 2019). Technische Methoden der Zustandserfassung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Schiere, Marcus Jacob; Franke, Bettina; Scharmacher, Florian (5 June 2019). Leistungsfähigkeit der Klebefuge in Brettschichtholz In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (5 June 2019). Einsatz der Pressverklebung - Forschungsergebnisse In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences

Franke, Steffen; Franke, Bettina (2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektteam, Ergebnisse In: 51. Fortbildungskurs S-WIN: Laubholz für Hochleistungen im Bauwesen. Weinfelden, Suisse. 22.-23.10.2019.

Franke, Bettina (2017). Holzfeuchte smart kalkuliert für moderne Tragquerschnitte In: 49. S-WIN Fortbildungskurs. Weinfelden, Schweiz. 24.-25.10.2017.

Franke, Steffen; Franke, Bettina (2014). Causes, assessment and impact of cracks in timber elements In: COST FP 1101 Workshop. Biel, Switzerland. 23.-24.09.2014.

Franke, Steffen; Franke, Bettina (2014). X-Ray technology for the assessment of timber structures In: COST FP 1101 Workshop. Biel, Switzerland. 23.-24.09.2014.

Magnière, Noëlie; Franke, Steffen; Franke, Bettina (2014). Investigation on Elements Presenting Cracks in Timber Structures In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Volkmer, Thomas; Franke, Bettina; Schusser, Anna (2014). Analysis of the Penetration of Adhesives at Finger-Joints in Beech Wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Franke, Steffen

Franke, Steffen; Franke, Bettina (5 June 2019). Technische Methoden der Zustandserfassung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (5 June 2019). Einsatz der Pressverklebung - Forschungsergebnisse In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences

Franke, Steffen; Franke, Bettina (2014). Causes, assessment and impact of cracks in timber elements In: COST FP 1101 Workshop. Biel, Switzerland. 23.-24.09.2014.

Franke, Steffen; Franke, Bettina (2014). X-Ray technology for the assessment of timber structures In: COST FP 1101 Workshop. Biel, Switzerland. 23.-24.09.2014.

Franke, Steffen; Magnière, Noëlie (2014). Discussion of testing and evaluation methods for the embedment behaviour of connections In: INTER 2014. Bath, United Kingdom. 01.-04.09.2014.

Franke, Steffen; Marto, João (2014). Investigation of Eucalyptus Globulus Wood for the Use as an Engineered Material In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Hausammann, Roman; Franke, Steffen (2014). A Modular Timber Construction System of Hollow-Box Elements In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Franke, Tom

Franke, Tom; Volkmer, Thomas (2018). Mineralization of wood with calcium oxalate In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17-18.09.2018.

Fredin, O.

Fredin, Ola

Fredon, Emmanuel

Frei, Reto

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

Frei, Reto (2017). Un pas en avant vers des matériaux renouvelables efficaces spirit biel/bienne, 1, pp. 16-17.

Froidevaux, Julien

Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148

Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735

Furrer, Roman

Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013

Ganne-Chédeville, Christelle

Ganne-Chédeville, Christelle (2019). Observer et imiter la nature spirit biel/bienne, 2, p. 19.

Ganne-Chédeville, Christelle (2017). Woodenboxspring - sommeil en harmonie avec la nature spirit biel/bienne, 1, pp. 8-9.

Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4

Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard; Lehmann, Martin (2012). Measures for the maintenance of untreated wood facades In: World Conference on Timber Engineering (WCTE 2012). Auckland, New Zealand. 15-19.07.2012.

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.

Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).

Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).

Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard (2010). Nachhaltige Reinigung von unbehandelten Holzfassaden – Ergebnisse aus laufenden Forschungsprojekten In: 42. SAH Fortbildungskurs. SAH

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2010). Reinigung von unbehandelten Holzfassaden Holzbaumarktschweiz : Fachmagazin für Holzbau, Architektur, Innenausbau, Produktion, 5, pp. 12-14.

Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.

Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.

Ganne-Chédeville, Christelle (2009). Schweißen von Holz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 1-6). Biberach, Deutschland: Institut für Holzbau, Hochschule Biberach

Ganne-Chédeville, Christelle (2008). Wood welding by linear friction: investigations and understanding of the physical and chemical modifications and development of an innovative technology. (Dissertation, Université Henri Poincaré - Nancy I)

Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392

Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA

Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9

Ganne-Chédeville, Christelle; Pichelin, Frédéric (2007). Holzschweißen : Holz verbinden, schnell und ohne Leim Holz-Zentralblatt(40), pp. 1109-1110.

Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068

Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.

Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6

Garbiel, Joseph

Gariglio, Federico

Geers, C.

Geiser, Martin

Geiser, Martin (2018). Neue Lösungen für den Holzbau. Erdbeben und Qualitätssicherung In: S-Win-Tagung 2018, Von der Forschung zur Praxis. Biel/Bienne, Switzerland. 16.05.2018.

Gelhaye, Pierre

Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305

Gerardin, Philippe

Grosse, Charlotte; Noël, Marion; Rautkari, Lauri; Gerardin, Philippe (2017). Influence of hygro-thermal treatment temperature and duration on dimensional stabilisation of wood modified with poly (butylene succinate) In: Scientific Conference on Wood Protection. Ghent, Belgium. 04.-08.06.2017.

Grosse, Charlotte; Thévenon, Marie France; Noël, Marion; Gerardin, Philippe (2016). Optimising wood chemical modification with lactic acid oligomers by screening of processing conditions and chemical additives In: 47th IRG Annual Meeting. Lisbon, Portugal. 15.-19.05.2016.

Gereke, Thomas

Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1

Geyer, Christoph

Geyer, Christoph; Wehle, Barbara; Müller, Andreas (5 April 2019). Monitoring of water contents and temperatures of historical Walls with interior Insulation in Switzerland In: International WTA - PRECOM³OS symposium. Leuven, Belgium.

Wehle, Barbara; Geyer, Christoph; Melian Hernandez, Amabel (12 March 2019). Schall- und Luftdichthe¡t von Fenstern in der Renovation In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 377-388). Biel: FORUM HOLZBAU

Geyer, Christoph; Wehle, Barbara; Melian Hernandez, Amabel (12 March 2019). Ein neues Verfahren zur Berechnung der dynamischen Wärmekapazität von Holzbalkendecken In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 151-160). Biel: FORUM HOLZBAU

Geyer, Christoph; Müller, Andreas; Wehle, Barbara (22 January 2019). Feuchteschutz sanierter Bestandswände mit Innendämmung Vergleich von Prognoseberechnung und Messung der Feuchtegehalte und Temperaturprofile In: Kolloquium Erhaltung von Bauwerken. Ostfildern, Deutschland. 22.-23.01.2019.

Gfeller, B.

JP (2006). Unfolding anchor (JP2006153277 (A))

Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa

Gfeller, Balz

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.

Wieland, Stefanie; Properzi, Milena; Pichelin, Frédéric; Gfeller, Balz (2005). Einsatz des linearen Vibrationsschweissens in der Holzindustrie In: Frauenhofer WKI Workshop: Klebstoffe für Holzprodukte. Braunschweig, Germany. 10-11 Nov 2005.

Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))

Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.

Ghazi Wakili, Karim

Ghazi Wakili, Karim; Stöckli, Thomas (4 September 2019). Slim building envelopes using vacuum glazing and high-performance insulation Journal of Physics: Conference Series, 1343, 012193. 10.1088/1742-6596/1343/1/012193

Ghorbani, Masoumeh

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

Giudici, F.

Goli, Giacomo

Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press

Gonin, Marc-André

Thömen, Heiko; Gonin, Marc-André (2010). European master programs in wood science and technology In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-7). United Nations Economic Commission for Europe – Timber Committee

Graf, René

JP (2006). Unfolding anchor (JP2006153277 (A))

Gramazio, Fabio

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Grigsby, W.

Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757

Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679

Gril, Joseph

Grosse, C.

Grosse, C.; Noël, Marion; Thevenon, M.; Gérardin, P. (2018). FTIR-ATR monitoring of chemical changes of thermo-chemically modified beech wood degraded by brown-rot fungus In: IRG49 - International Research Group on Wood Protection. Johannesburg, South Africa. 29.04-03.05.2018.

Grosse, Charlotte

Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035

Gröner, E.

Grönquist, P.

Gylland, Anders Samstad

Gyr, R.

Volkmer, Thomas; Gyr, R.; Kaiser, P. (2017). Methoden der Holzmodifikation zur Verbesserung der Dauerhaftigkeit und des Brandschutzes In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient, geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.

Gérardin, P.

Gérardin, Philippe

Güntekin, Ergün

Hagman, Olle

Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4

Halaburt, Ellen Isabell

Hapla, Frantisek

Harling, S.

Harling, Steffen

Hausammann, Roman

Hausammann, Roman; Franke, Steffen (2014). A Modular Timber Construction System of Hollow-Box Elements In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Heintzmann, Philipp

Heintzmann, Philipp; Stolz, Martin (June 2019). Lawinenverbauungen, die auch vor Steinschlag schützen spirit biel/bienne, 2019(2), pp. 24-25. Berner Fachhochschule BFH

Helm, Volker

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Hering, Stefan

Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: Proceedings of the IAWPS 2015. Tokyo, Japan. 15.-17.03.2015.

Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: International Conference "Wood Science and Engineering in the Third Millennium" - ICWSE 2015. Brasov, Romania. 05.-07.11.2015.

Heubuch, Sebastian Pascal

Hilbers, Ulrich

Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004

Hildbrand, Erwin

Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001

Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644

Hill, S.

Hinterleitner, Christina

Mayer, Ingo; Hinterleitner, Christina (2018). Décontaminer les biens culturels spirit biel/bienne, 1, pp. 18-19.

Hofer, Stephan

Hofer, Stephan; Rudin, Beat; Uehlinger, Urs (2017). System to certify windows/doors with burglary-resistant characteristics In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.

Holmes, Christopher

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

Homerin, Benoit

Thömen, Heiko; Homerin, Benoit (2017). Modernste Prozessleittechnik - Integration eines mathematisch-physikalischen Modells in ein industrielles Prozessleitsystem In: 12. Holzwerkstoffkolloquium. Dresden, Germany. 14.-15.12.2017.

Hubert, V.

Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.

Hubert, Vera

Hughes, Mark

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0

Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.

Hunger, K.

Hunger, Katja

Hurst, Andreas

Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.

Hurst, Andreas (2008). Holzhausbau in anderen Klimaregionen In: 40. Fortbildungskurs der Schweizerische Arbeitsgemeinschaft für Holzforschung (pp. 255-264). Zürich: SAH

Hänninen, Toumas

Höltschi, Christoph

Volkmer, Thomas; Höltschi, Christoph (2009). Holzfassaden verändern ihre Farbe Applica : Die Zeitschrift für das Maler- und Gipsergewerbe, 5, pp. 12-16. Schweizerischer Maler- und Gipserunternehmer-Verband ; Schweizerischer Maler- und Gipsermeister-Verband

Volkmer, Thomas; Höltschi, Christoph (2009). Zahn der Zeit Immobilia : Zeitschrift für die Immobilienwirtschaft(6), pp. 37-38. SVIT Verlag AG

Irle, Mark

Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press

Ivy-Ochs, S.

Ivy-Ochs, Susan

Job, Charles

Thömen, Heiko; Job, Charles (2019). Hochflexible Beleuchtungslösungen in Möbeln spirit biel/bienne, 2, pp. 16-17.

Johansson, Leena-Sisko

Jones, Dennis

Josset, Sébastien

Jung, H.

Jääskeläinen, Anna-Stiina

Kaiser, P.

Kaliske, Michael

Kammer, D.

Kanazawa, F.

Kankam, Charles K.

Keunecke, Daniel

Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.

Khojasteh-Khosro, Saeed

Khojasteh-Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products European Journal of Wood and Wood Products, 78(3), pp. 593-603. Springer 10.1007/s00107-020-01519-8

Knauss, Michael

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Koch, G.

Koch, Gerald

Kohler, Matthias

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Kohlhammer, Thomas

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Kolb, Hanspeter

Kolb, Hanspeter; Beetschen, Mirko (2019). Vielfalt im Holzbau Die schönsten Seiten des Kantons Bern: Vol. 26. Bern: Stämpfli Verlag AG

Kolb, Hanspeter; Volkmer, Thomas (2019). Pour du bois résistant mieux au feu et à la lumière spirit biel/bienne, 2, pp. 8-9.

Kolb, Hanspeter (2018). Holzfassaden - Eine Frage der Konstruktion In: 9. Internationaler Holz(Bau)Physik-Kongress. Leipzig, Germany. 15.-16.02.2018.

Kolb, Hanspeter (2017). Hinterlüftete und nicht hinterlüftete Aussenwandbekleidung - ein Überblick In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient, geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.

Konnerth, J.

Konnerth, Johannes

Konopka, Daniel

Korkut, Mehmet

Krackler, Verena

Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.

Kraft, Sebastian

Kranitz, Katalin

Krawielitzki, Stefan

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

Kroslakova, Ivana

Krug, Detlef

Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD

Kunz, J.

JP (2006). Unfolding anchor (JP2006153277 (A))

Kümmin, P.

Kümmin, Peter

Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag

Künniger, Tina

Lagel, Marie-Christine

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

Laine, Janne

Landmesser, H.

Volkmer, Thomas; Landmesser, H. (2007). Pilze auf Holzfassaden Berner Fachhochschule Architektur, Holz und Bau

Lanvermann, C.

Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2

Leban, J M

Leban, J-M.

Leban, J. M.

Leban, J.-M.

Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8

Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310

Leban, J.M.

Leban, Jean-Michel

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004

Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001

Lehmann, E.

Lehmann, Eberhard

Lehmann, Mario

Lehmann, Martin

Lehmann, Martin (October 2019). Keilzinkung und Flächenverklebung von Buchenlamellen In: S-Win 51. Fortbildungkurs - Hochleistungswerkstoffe im Holzbau. S-Win

Lehmann, Martin; Volkmer, Thomas (2014). Investigation of the bond quality of hardwoods with micro structured surfaces In: 68th FPS International Convention. Quebec City, Canada. 10.-13.08.2014.

Lehmann, Martin; Volkmer, Thomas (2014). Influence of micro structured surface on the bond quality of hardwood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.

Lehmann, Martin (2009). Verstärkung von Holz mittels vorgespannten CFK-Lamellen In: Fortbildungskurs der SAH: Werkstoffkombinationen – ein Mehrwert für Holz (pp. 1-12). SAH

Lehmann, Martin (2008). Ductile adhesive interface for glulam In: Holzbau Forschung und Praxis (2008). Stuttgart, Germany. 05.-06.03.2008.

Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric (2008). Strengthening of timber structures using pre-stressed carbon fibre lamellas In: MEDACHS Conference (2008). Lisbon, Portugal. 20.-23.01.2008.

Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus

JP (2006). Unfolding anchor (JP2006153277 (A))

Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.

Richter, Klaus; Lehmann, Martin; Properzi, Milena (2004). Long-term behaviour of pre-stressed timber-CFRP composites In: Enhancing bondline performance : proceedings of the final conference in COSTE 34 "Bonding of timber" (pp. 80-88). Lövér-Print Nyomdaipari

Lehmann, Roland

Lehringer, C.

Letsch, Bernhard

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.

Letsch, Bernhard (2009). Forschungsprojekt Fassaden Holzbaumarktschweiz(1), pp. 12-13. FS Media

Lombardo, Tiziana

Lovrecek, Mladen

Lu, Xiaoning

Ludtke, Jan

Luedtke, Jan

Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.

Maeder, Fritz

Maeder, Fritz (5 June 2019). Überlegungen zur Ausschreibung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Magnière, Noëlie

Franke, Steffen; Magnière, Noëlie (2014). Discussion of testing and evaluation methods for the embedment behaviour of connections In: INTER 2014. Bath, United Kingdom. 01.-04.09.2014.

Mannes, D.

Mansouri, H.

Mansouri, H. R.

Mantovani, Camilla

Mantovani, Camilla; Seidlitz, Nicolas; Wiederkehr, Martin; Uehlinger, Urs (2017). Quantitative evaluation of beech and locust dowels in contemporary window systems In: 12th Conference on Advanced Bulding Skins. Bern, Schweiz. 02.-03.10.2017.

Margreth, Annina

Markovic, Jelena

Marto, João

Matteucci, Giorgio

Mayer, Ingo

Mayer, Ingo (2019). VOC-Emissionen aus mehrschichtigen Wand- und Deckenelementen in Holz-Rahmenbauweise HolzBauSpezial Bauphysik & Gebäudetechnik, 10, pp. 421-431. Forum Holzbau

Mayer, Ingo; Selbmann, Karl-Heinz (2019). 3D drucken mit Holz Spirit biel/bienne, 1, p. 16.

Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21.

Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27.

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Mayer, Ingo; Hinterleitner, Christina (2018). Décontaminer les biens culturels spirit biel/bienne, 1, pp. 18-19.

Mayer, Ingo (2018). Les fins limiers de la BFH au service d’un air ambiant sain spirit biel/bienne, 3, pp. 8-9.

Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21.

Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15.

Mayer, Ingo (2016). Polyvalent et durable – Le tanin issu des forêts suisses spirit biel/bienne, 2, pp. 24-25.

Mayer, Ingo (2016). Qualité de l’air intérieur: Matériaux sans émissions et inodores, question d’actualité spirit biel/bienne, 3, p. 12.

Mayer, Ingo; Nie, Yunyun (2015). Fully automated, on-line micro-scale chamber method for determination of volatile organic compound emissions from building products In: 17th Workshop “Geruch und Emissionen bei Kunststoffen“. Kassel, Germany. 16.-17.03.2015.

Mayer, Ingo (2014). Gerüche und Emissionen von Parkett- und Steinbodenölen In: 16th Workshop "Geruch und Emissionen bei Kunststoffen". Kassel, Germany. 24.-25.03.2014.

Mayer, Ingo (2010). Ist die Luft rein? – Emissionen aus lackierten Oberflächen in die Innenraumluft In: InteriorDays. Biel/Bienne, Switzerland. 16.-17.09.2010.

Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12.

Mayer, Ingo (November 2009). Divergencias de color en Black Cherry aumentan Holz-Zentralblatt, Edición especial en lengua española por la „Fimma-Maderalia“, pp. 20-21.

Mayer, Ingo (2007). Biologische und chemische Untersuchungen über Holzinhaltsstoffe und deren Reaktionsmechanismen bei der wärmetechnischen Behandlung und Wasseraufbereitung in der Furnierindustrie (Dissertation, Universität Hamburg)

McGeehan, Benjamin

Melian Hernandez, Amabel

Michel, F.

Michel Leban, Jean

Mortato, Mariangela

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

Moser, Hansruedi

Mougel, Eric

Museum, Swiss National

Mustapha, S.

Månson, Jan-Anders E.

Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.

Müller, Alexandra

Müller, Andreas

Müller, Andreas (1 September 2019). Zerstörungsfreie Prüfmethoden Wir Holzbauer, 6, pp. 34-37.

Müller, Andreas; Franke, Bettina (2019). Prüfung von geklebten Vollholzprodukten Wir Holzbauer, 5, pp. 26-29.

Müller, Andreas; Franke, Bettina (5 June 2019). Zustandserfassung - Einführung und Methodik In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Müller, Andreas; Amstutz Hugi, Corinne (1 May 2019). Methoden der Zustandserfassung Wir Holzbauer, 4, pp. 30-33.

Müller, Andreas (1 March 2019). Zustandserfassung von Holzkonstruktionen Wir Holzbauer, 3, pp. 30-33.

Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences

Mürau, Elke

Nakatani, M.

Navi, Parviz

Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.

Navi, Parviz; Pichelin, Frédéric (2008). Difficulties of the modelling of wood forming processes In: Dresdner Werkzeugmaschinen-Fachseminar (2008). Dresden, Germany. 11.-12.12.2008.

Nduka, O.

Nedelkoska, Elena

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Negro, Francesco

Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.

Nelis, Thomas

Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.

Neuenschwander, Jürg

Neuenschwander, Peter and Sennhauser

Nie, Yunyun

Niemz, Peter

Niemz, Peter (2017). Zur Orthotropie der physikalisch-mechanischen Eigenschaften von Fichtenholz Annals of Warsaw University of Life Sciences - SGGW Forestry and Wood Technology, 99, pp. 174-183.

Niemz, Peter; Sonderegger, Walter (2017). Holzphysik München, Deutschland: Carl Hanser Verlag GmbH & Co. KG 10.3139/9783446445468

Niemz, Peter (2015). In-situ-Untersuchungen an Holzproben mittels Synchrotron-Tomographie In-situ Synchrotron based micro-tomography on wood samples In: 3. Holzanatomisches Kolloquium. Dresden, Germany. 01-02.10.2015.

Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003

Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.

Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag

Noël, Marion

Noël, Marion (2018). Des pistes vertes pour protéger le bois spirit biel/bienne, 3, pp. 14-15.

Strautmann, Jean; Noël, Marion; Volkmer, Thomas (October 2013). Surface qualification of weathered wood In: Joint COST FP0904 & FP1006 International Proceeding of the Workshop on characterization of modified wood in relation to wood bonding and coating performance. Rogla, Slovenia. 16-18 Oct 2013.

Noël, Marion (2007). Innovative lactic acid biopolymer / wood based composite material elaboration (Dissertation, Université Henri Poincaré - Nancy I)

Nyffenegger, Franziska

Näher, Thomas

Oesch, Christof

Ormarsson, Sigurdur

Ossei Agyekumhene, Isaac

Oteng-Amoako, Andrew

Ould Henia, M.

Ozyhar, Tomasz

Pattis, Reto

Properzi, Milena; Pattis, Reto; Pichelin, Frédéric (2008). Wood ash as a resource for the production of innovative composite materials In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 2.-5.06.2008.

Pauli, Bernhard

Petrak, G.

Petri-Fink, A.

Piccand, Miguel

Pichelin, Frédéric

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Pichelin, Frédéric (2016). «Cocoboard» panneaux biosourcés à base de fibres de coco spirit biel/bienne, 2, p. 22. BFH

Placencia, Maria Inés; Pizzi, Antonio; Pichelin, Frédéric (June 2011). Linear friction welding for wood, a parameters study for up-scaled assemblies In: CIMAD 11 – 1º Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal. 7-9 Jun 2011.

Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.

Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag

Navi, Parviz; Pichelin, Frédéric (2008). Difficulties of the modelling of wood forming processes In: Dresdner Werkzeugmaschinen-Fachseminar (2008). Dresden, Germany. 11.-12.12.2008.

Ganne-Chédeville, Christelle; Pichelin, Frédéric (2007). Holzschweißen : Holz verbinden, schnell und ohne Leim Holz-Zentralblatt(40), pp. 1109-1110.

JP (2006). Unfolding anchor (JP2006153277 (A))

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.

Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))

Ammann AG (2004). Connecting element (EP 1 437 040 A1)

Pinzer, Bernd R.

Pizzi, A.

Pizzi, Antonio

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.

Placencia, Maria Inés

Placencia Peña, M.I

Plummer, C.

Plummer, Christopher J.G.

Prasad Hari, Durga

Properzi, M.

Properzi, Milena

Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.

Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.

Quartey, G.A

Zürcher, Ernst; Quartey, G.A (2008). Durability investigations of lesser-known Ghanaian wood species In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.

Quartney, Gladys A.

Zürcher, Ernst; Rogenmoser, Christian; Quartney, Gladys A. (November 2009). Wenig bekannte Holzarten Westafrikas Holzforschung Schweiz, 2, pp. 12-14. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH

Rauscher, R.

Rautenstrauch, Karl

Rautkari, Lauri

Rehm, Klaus

Reinhard, Markus

Rellstab, Christoph

Resch, L.

Rhême, Martin

Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.

Richter, Klaus

Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus

Ridgway, Cathy

Rigolet, S.

Rodríguez-Lorenzo, L.

Roduner, A.

Roduner, Armin

Roemer, Michael

Rogenmoser, C.

Zürcher, Ernst; Rogenmoser, C. (2008). Exploring biodiversity at the wood level – Timber identification and structure-properties relationships In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.

Rogenmoser, Christian

Zürcher, Ernst; Rogenmoser, Christian (2010). Considering reversible variations in wood properties : possible applications in the choice of the tree-felling date ? In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.

Romania, Braşov

Ropp, Julien

Rose, Christophe

Rosenkranz, Andreas

Rosenkranz, F.

JP (2006). Unfolding anchor (JP2006153277 (A))

Rothen-Rutishauser, B.

Rudin, Beat

Rädle, Wolfgang

Rädle, Wolfgang (15 June 2015). Schallschutz für den ungestörten Schlaf Schreiner Zeitung, 26/27, pp. 15-18.

Salzgeber, Dario

Sanabria, S. J.

Sanabria, Sergio J.

Sandberg, Dick

Sanglard, Marion

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

Sause, Markus G. R.

Sause, Markus G.R.

Schaller, M.

Scharmacher, Florian

Schiere, Marcus Jacob; Franke, Bettina; Scharmacher, Florian (5 June 2019). Leistungsfähigkeit der Klebefuge in Brettschichtholz In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Schiere, Marcus Jacob

Schiere, Marcus Jacob; Franke, Bettina; Scharmacher, Florian (5 June 2019). Leistungsfähigkeit der Klebefuge in Brettschichtholz In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (5 June 2019). Einsatz der Pressverklebung - Forschungsergebnisse In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences

Schindler, Liliane

Schlaepfer, R.

Schlegel, S.

Schlunegger, F.

Schlunegger, Fritz

Schläpfer, R.

Schlüchter, C.

Schmidt, Benjamin

Schmidt, Henrik

Schnider, Thomas

Schnueriger, M.

Schnüriger, Marco

Schober, Kay Uwe

Schoelkopf, Joachim

Schröder, David

Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))

Schusser, Anna

Schwarz-Platzer, Katharina

Schwarz-Platzer, Katharina (2013). Force measurements along anchors during dynamic loading Mitteilungen der Geotechnik Schweiz, 166, pp. 121-129.

Schär, M.

Schär, Tobias

Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21.

Schütz, Philipp

Seidlitz, Nicolas

Seifried, Udo

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Selbmann, K.-H.

Selbmann, Karl-Heinz

Mayer, Ingo; Selbmann, Karl-Heinz (2019). 3D drucken mit Holz Spirit biel/bienne, 1, p. 16.

Sennhauser, Urs

Sernek, Milan

Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press

Shalbafan, Ali

Shalbafan, Ali; Thömen, Heiko (2020). Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features Applied Sciences, 10(2), p. 593. MDPI 10.3390/app10020593

Shi, Bozhang

Sigrist, Christophe

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Sitzmann, Stefan

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Smole, Jože

Sonderegger, Walter

Niemz, Peter; Sonderegger, Walter (2017). Holzphysik München, Deutschland: Carl Hanser Verlag GmbH & Co. KG 10.3139/9783446445468

Spang, F.

Spear, Morwenna

Stalder, Urs

Stalder, Urs (2019). Einbruchhemmung bei Fenstern - was wichtig ist Sicherheitsforum, 6, pp. 10-16.

Stampanoni, M.

Stampanoni, Marco

Steiger, Benjamin

Stevanovic, T.

Stolz, Martin

Heintzmann, Philipp; Stolz, Martin (June 2019). Lawinenverbauungen, die auch vor Steinschlag schützen spirit biel/bienne, 2019(2), pp. 24-25. Berner Fachhochschule BFH

Büttner, Daniel; Stolz, Martin; Balazs, Fonyo (2014). Forschungsprojekt über Geokunststoffe als Schutz der Abdichtung geotchnischer Bauwerke. Strasse und Verkehr, 9, pp. 30-32.

Stolz, Martin (2014). Es besteht die Gefahr, dass die Technik versagt. Kommunalmagazin, 4, pp. 28-30.

Stolz, Martin (2014). Es besteht die Gefahr, dass die Technik versagt. Baublatt : aktuelle Informationen für die Schweizer Baubranche, 41, pp. 12-14. Docu Media Schweiz

Strahm, T.

Strahm, Thomas

Strautmann, J.

Strautmann, Jean

Stöckli, Thomas

Sundqvist, Bror

Swaboda, C.

Swaboda, Christiane

Tannert, T.

Tannert, Thomas

Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4

Tata Kimeng, H.

Thevenon, M.

Thomas, A.

Thévenon, Marie France

Thévenon, Marie-France

Thömen, Heiko

Thömen, Heiko (2019). Rohstoffe effizienter einsetzen - das Modell dazu spirit biel/bienne, 1, pp. 14-15.

Thömen, Heiko; Job, Charles (2019). Hochflexible Beleuchtungslösungen in Möbeln spirit biel/bienne, 2, pp. 16-17.

Thömen, Heiko; Wirth, Filipp (2018). Le bien-être – grâce à la réalité virtuelle ? spirit biel/bienne, 3, p. 25.

Thömen, Heiko (2017). Légèreté pour le mobilier spirit biel/bienne, 1, pp. 24-25.

Thömen, Heiko; Viemeister, D. (2015). Bestimmung der Klebstoffverteilung im industriellen Holzwerkstoffprozess In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.

Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press

Thömen, Heiko; Walther, Thomas (2010). Grundlegende Untersuchungen zur Herstellung und Struktur von Holzwerkstoffen [Textbook] . Biel/Bienne, Schweiz: Berner Fachhochschule Architektur, Holz und Bau

Todaro, Luigi

Tondi, Gianluca

Triboulot, Pascal

Tröbs, Hans-Martin

Uehlinger, Urs

Donzé, Marc; Brunner, Maurice Yaw; Uehlinger, Urs (2016). Reinforced, insulated glazing for large windows In: 11th Conference on Advanced Building Skin 2016. Bern, Schweiz. 10.-11.10.2016.

Uimonen, Tuuli

Vallée, T.

Vallée, Till

Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4

Van de Kuilen, Jan Willem G.

Van de Kuilen, Jan-Willem G.

Viemeister, D.

Thömen, Heiko; Viemeister, D. (2015). Bestimmung der Klebstoffverteilung im industriellen Holzwerkstoffprozess In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.

Vinciguerra, Vittorio

Volkmer, Thomas

Kolb, Hanspeter; Volkmer, Thomas (2019). Pour du bois résistant mieux au feu et à la lumière spirit biel/bienne, 2, pp. 8-9.

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Franke, Tom; Volkmer, Thomas (2018). Mineralization of wood with calcium oxalate In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17-18.09.2018.

Volkmer, Thomas (2018). Funktionaler Oberflächenschutz von Holzfassaden In: 24. Internationales Holzbau-Forum IHF. Garmisch-Partenkirchen, Germany. 05-07.12.2018.

Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15.

Volkmer, Thomas (2017). Le bois, résistant au feu et durable, grâce aux minéraux cristallisés spirit biel/bienne, 2, p. 26.

Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.

Lehmann, Martin; Volkmer, Thomas (2014). Investigation of the bond quality of hardwoods with micro structured surfaces In: 68th FPS International Convention. Quebec City, Canada. 10.-13.08.2014.

Lehmann, Martin; Volkmer, Thomas (2014). Influence of micro structured surface on the bond quality of hardwood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.

Volkmer, Thomas; Höltschi, Christoph (2009). Zahn der Zeit Immobilia : Zeitschrift für die Immobilienwirtschaft(6), pp. 37-38. SVIT Verlag AG

Volkmer, Thomas (2007). Schimmelpilze auf beschichteten Holzfassaden: chemische und physikalische Einflussfaktoren (Dissertation, Albert-Ludwigs-Universität Freiburg)

Volkmer, Thomas; Landmesser, H. (2007). Pilze auf Holzfassaden Berner Fachhochschule Architektur, Holz und Bau

Vuorinen, Tapani

Walther, Thomas

Wan, Hui

Wang, Chao

Wang, Xiaodong

Warnes, J.

Waser, Jerome

Wehle, Barbara

Weiland, G.

Weiland, Guntram

Welker, Matthias

Welling, Johannes

Wenderdel, Christoph

Wenker, Jan L.

White, Robert H.

Wiederkehr, Martin

Wieland, S.

Wieland, Stefanie

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.

Wieland, Stephanie

Willemin, Stéphane

Willemin, Stéphane (2018). La façade ventilée In: S-Win-Tagung 2018, Construction en bois: assurer la durabilité. Yverdon-les-Bains, Switzerland. 18.04.2018.

Wirth, Filipp

Thömen, Heiko; Wirth, Filipp (2018). Le bien-être – grâce à la réalité virtuelle ? spirit biel/bienne, 3, p. 25.

Wörle, Marie

Yavuz, V.

Yavuz, Vural

Yoon, Yonghoon

Zanetti, M.

Zanetti, Michela

Zanuttini, Roberto

Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.

Zauner, M.

Zauner, Michaela

Zemp, Armin

Zikeli, Florian

Zock, Peter

Helm, Volker; Knauss, Michael (2015). Additive Robotic Fabrication of Complex Timber Structures In: Symposium „Advancing Wood Architecture“. Frankfurt, Germany. 27.03.2015.

Zürcher, Ernst

Zürcher, Ernst (June 2011). Dufthölzer - Bäume an deren Duft erkennen In: Schweizerische Beiträge zur Dendrologie. Zürich: Schweizerischen Dendrologischen Gesellschaft (SDG)

Zürcher, Ernst (2011). Plants and the moon - Traditions and phenomena HerbalEGram, 8(4), pp. 1-14. American botanical council

Zürcher, Ernst (2010). Holzgeruch – eine unbeachtete, jedoch wirksame Eigenschaft Bündner Wald, 6, pp. 69-74. Gasser

Brunner, Maurice Yaw; Zürcher, Ernst (2009). Holzbrückenbau in Afrika: Neue Wege für Ghana Schweizer Holzbau, pp. 19-21.

kwesi, Daniel

van de Kuilen, Jan-Willem G.

von Arx, U.

von Arx, Urs

Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12.

von Fehrn, H.

This list was generated on Sun Aug 16 03:33:50 2020 CEST.

Export as	Atom RSS 1.0 RSS 2.0

ARBOR

Department of Architecture, Wood and Civil Engineering > Bereich Forschung & Entwicklung, Dienstleistungen und Weiterbildung

Abegg, Daniel

Abela, R.

Adibekian, Alexander

Aeh, K.

Affolter, B.

Aghaegbusi Mgbemene, C.

Akçar, N.

Akçar, Naki

Amen, Carlos

Ammann, Paul

Ammann, S.

Ammann, Samuel

Ammann, Samuel D.

Amstutz Hugi, Corinne

Andrew, Akwasi

Anheuser, Kilian

Appiah-Kubi, Emmanuel

Arietano, L.

Attaf, B.

Aydın, Tuğba Yılmaz

Ayrilmis, Nadir

Bachmann, Eduard

Bachtiar, Erik V.

Badoux, François

Baensch, Franziska

Balazs, Fonyo

Barbu, Marius

Barbu, Marius C.

Baumann, J. M.

Beetschen, Mirko

Benthien, Jan T.

Berli, C.

Beyer, M.

Beyer, Mario

Bianchi, Sauro

Bieri, N.

Bockel, S.

Bockel, Stefan

Bocquet, J.-F.

Brodard, P.

Brombacher, Volker

Bruderer, B.

Brunner, A. J.

Brunner, A.J.

Brunner, Andreas J

Brunner, Andreas J.

Brunner, Maurice Yaw

Bueche, Nicolas

Bues, Claus-Thomas

Buividé, Indre

Burgert, Ingo

Burud, I.

Bühlmann, Urs

Büttner, Daniel

Campbell, J.M.

Canoine, Benoît

Carrillo-Parra, Artemio

Centre, Collections

Cerato, Luca

Clenin, Reto

Clerc, Gaspard

Clénin, Reto

Conedera, M.

Conzett, Jürg

Cremonini, Corrado

Curling, Simon F.

Delmotte, L.

Delmotte, Luc

Depnering, Tobias

Despres, A.

Donzé, Marc

Duchanois, G.

Duchanois, Gilles

Dumont, A.-G.

Ehrhart, Thomas

Engels, Isabel

Enlund, Nils

Ettlin, Toni