Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | Q | R | S | T | V | W | Z
Number of items at this level: 301.

A

Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641

Albaba, Adel; Lambert, Stéphane; Faug, Thierry; Radjai, F.; Nezamabadi, S.; Luding, S.; Delenne, J.Y. (2017). Dry granular avalanche impact force on a rigid wall of semi-infinite height EPJ Web of Conferences, 140, 03054. EDP Science 10.1051/epjconf/201714003054

Albaba, Adel; Lambert, Stéphane; Kneib, François; Chareyre, Bruno; Nicot, François (2017). DEM Modeling of a Flexible Barrier Impacted by a Dry Granular Flow Rock Mechanics and Rock Engineering, 50(11), pp. 3029-3048. Springer 10.1007/s00603-017-1286-z

Ardö, Ylva; Berthier, Françoise; Hartmann, Katja; Eugster, Elisabeth; Fröhlich-Wyder, Marie-Therese; Jakob, Ernst; Wechsler, Daniel (2018). Bacterial Surface-Ripened (Smear) Cheeses In: Papademas, Photis; Bintsis, Thomas (eds.) Global cheesemaking technology : cheese quality and characteristics (pp. 397-414). Hoboken: Wiley 10.1002/9781119046165.ch10

Güntekin, Ergün; Aydın, Tuğba Yılmaz; Niemz, Peter (2015). Prediction of compression properties in three orthotropic directions for some important Turkish wood species using ultrasound BioResources, 10(4), pp. 7252-7262.

B

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

Lueg, Christopher; Banks, Bridgette; Michalek, Josephine; Dimsey, Jack; Oswin, Dominic (2019). Close Encounters of the Fifth Kind: Recognizing System-Initiated Engagement as Interaction Type The Journal of the Association for Information Science and Technology, 70(6), pp. 634-637. Wiley 10.1002/asi.24136

Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee

Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press

Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346

Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21.

Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105

Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279

Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001

Brethauer Studer, Simone; Shahab, Robert; Studer, Michael Hans-Peter (2017). Enhanced simultaneous saccharification and fermentation of pretreated beech wood by in situ treatment with the white rot fungus Irpex lacteus in a membrane aerated biofilm reactor Bioresource Technology, 237(Elsevi), pp. 135-138. 10.1016/j.biortech.2017.03.050

Brethauer Studer, Simone; Studer, Michael Hans-Peter (2015). Biochemical Conversion Processes of Lignocellulosic Biomass to Fuels and Chemicals – A Review Chimia, 69(10), pp. 572-581. Schweizerische Chemische Gesellschaft 10.2533/chimia.2015.572

Brethauer Studer, Simone; Studer, Michael Hans-Peter (2014). Consolidated bioprocessing of lignocellulose by a microbial consortium Energy & Environmental Science, 7(4), pp. 1446-1453. Royal Society of Chemistry 10.1039/C3EE41753K

Brethauer Studer, Simone; Studer, Michael Hans-Peter; Wyman, Charles E. (2014). Application of a slurry feeder to 1 and 3 stage continuous simultaneous saccharification and fermentation of dilute acid pretreated corn stover Bioresource Technology, 170, pp. 470-476. Elsevier 10.1016/j.biortech.2014.07.049

Donzé, Marc; Brunner, Maurice Yaw (2009). Elastisch nachgiebige Klebefuge für Brettschichtholz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 819-824). Biberach, Deutschland: Institut für Holzbau Hochschule Biberach

Brunner, Maurice Yaw; Donzé, Marc (2008). GLULAM REBORN : A flexible adhesive interface to increase the bending resistance of glulam Applied Sciences, p. 2008.

Brunner, Maurice Yaw (2006). On the increasing importance of tensile loading perpendicular to the grain in some new timber products In: World Conference on Timber Engineering. Portland, USA. 06.-10.08.2006.

GEISTLICH & SOEHNE AG (2009). Glued laminated beam (EP2090413 (A1))

Brunner, Maurice Yaw; Engels, Isabel (2007). The search for an adhesive to grant glulam ductile behaviour In: SEMC International Conference. 10-12 Sep 2007.

Lehmann, Martin; Brunner, Maurice Yaw; Kraft, Sebastian (2010). Higher load bearing capabilities with elastic glue lines for glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.

Brunner, Maurice Yaw; Lehmann, Martin (2009). Frp-prestressed timber : losses in prestressing force due to elastic , creep and shrinkage deformations of the timber In: FRPRCS. Sydney, Australia. 13-15 Jul 2009.

Brunner, Maurice Yaw; Schnueriger, M. (2004). Strengthening of timber beams with prestressed artificial fibers: development of a suitable adhesive technology In: International Symposium on Advanced Timber and Timber-composites Elements for Building (pp. 45-50). San Michele all'Andige, Italy: CNR-Ivalsa

Brunner, Maurice Yaw; Schnueriger, M.; Lehmann, Martin (2008). Strengthening glulam beams with prestressed multilayer FRP carbon laminates In: Final Conference COST E34 Bonding of Timber (2008). Sopron, Hungary. 06.-07.05.2008.

Brunner, Maurice Yaw; Schnüriger, Marco; Roemer, Michael (2009). Holz-Beton-Platten mit Klebeverbund In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 705-710). Biberach: Institut für Holzbau Hochschule

Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari

Brunner, Maurice Yaw; Zürcher, Ernst (2009). Holzbrückenbau in Afrika: Neue Wege für Ghana Schweizer Holzbau, pp. 19-21.

Delley, Mathilde; Brunner, Thomas (2020). A segmentation of Swiss fluid milk consumers and suggestions for target product concepts Journal of Dairy Science, 103(4), pp. 3095-3106. Elsevier 10.3168/jds.2019-17325

Brunner, Thomas; Delley, Mathilde; Denkel, Christoph (2018). Consumers’ attitudes and change of attitude toward 3D-printed food Food Quality and Preference, 68, pp. 389-396. Elsevier 10.1016/j.foodqual.2017.12.010

Sütterlin, Bernadette; Brunner, Thomas; Siegrist, Michael (2011). Who puts the most energy into energy conservation? A segmentation of energy consumers based on energy-related behavioral characteristics Energy Policy, 39(12), pp. 8137-8152. Elsevier 10.1016/j.enpol.2011.10.008

Bäschlin, Nathalie; Läuchli, Matthias; Palmbach, Cornelius; Hoess, Anita; Ryser, Marcel; Fankhauser, Thomas; Sautter, Katharina (2015). Der Teufel steckt im Detail – Zur Praxisanwendung der Forschungsergebnisse Transport fragiler Gemälde Zeitschrift für Kunsttechnologie und Konservierung, 29(2), pp. 211-222.

Bühler, Marcel; Häni, Christoph; Kupper, Thomas; Schrade, S.; Zähner, M.; Wyss, S.A.; Mohn, J.; Ammann, C.; Brönimann, S. (7 April 2019). Assessment of methane emissions from a dairy farm using an inverse dispersion technique In: EGU General Assembly 2019. Geophysical Research Abstracts: Vol. 21. Göttingen: Copernicus Gesellschaft

C

Cam, Peter; Sivillica, Fabio; Hänni, Simon; Orlando, Fabrizio; Ohr, Steffen; Schoelkopf, Joachim; Schwaller, Patrick (27 June 2019). Cleaning surfaces from food residues with pulsed laser In: World of Photonics Congress 2019. München. 23. - 27. Juni 2019.

Canoine, Benoît (2019). Le bois densifié, un bois «exotique» local spirit biel/bienne, 2, p. 23.

Chervet, A.; Sturny, W.; Gut, S.; Sommer, M.; Stettler, Matthias; Weisskopf, P.; Keller, Th. (2016). Die maximal tragbare Radlast – eine zweckmässige Kenngrösse für die Praxis Agrarforschung Schweiz, 7(7-8), pp. 330-337. Agroscope Liebefeld-Posieux ALP

Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008

Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung

Zürcher, Ernst; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH

Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.

D

Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020

Denecke, Kerstin (2020). Biomedical Standards and Open Health Data (In Press). In: Reference Module in Biomedical Sciences. Elsevier 10.1016/b978-0-12-801238-3.11527-2

Denecke, Kerstin; Vaaheesan, Sayan; Arulnathan, Aaganya (2020). A Mental Health Chatbot for Regulating Emotions (SERMO) - Concept and Usability Test IEEE Transactions on Emerging Topics in Computing, 14(8), p. 1. IEEE 10.1109/TETC.2020.2974478

Dungga Winterleitner, Angelina; Weissenfeld, Katinka; Riesch, Markus (2018). Barrierefrei hilft allen Kommunalmagazin(5), pp. 40-41. Docu Media Schweiz GmbH

E

Eugster, Elisabeth; Fröhlich-Wyder, Marie-Therese; Jakob, Ernst; Wechsler, Daniel; Morales, Maria Belén López; Licitra, Giuseppe; Berthier, Françoise; Papademas, Photis; Ardö, Ylva; Tavares, Tânia G.; Xavier Malcata, F.; Radulovic, Zorica; Miocinovic, Jelena (2018). Semi-hard Cheeses In: Global cheesemaking technology : cheese quality and characteristics (pp. 247-300). Hoboken: Wiley 10.1002/9781119046165.ch3

Eugster, Elisabeth; Fuchsmann, Pascal; Schlichtherle-Cerny, Hedwig; Bütikofer, Ueli; Irmler, Stefan (2019). Formation of alanine, α-aminobutyrate, acetate, and 2-butanol during cheese ripening by Pediococcus acidilactici FAM18098 International Dairy Journal, 96, pp. 21-28. Elsevier 10.1016/j.idairyj.2019.04.001

Eugster, Elisabeth; Jakob, Ernst (2019). Pre-treatments of Milk and their Effect on the Food Safety of Cheese Milk Science International: journal of nutrition research and food science, 72(8), pp. 45-52. AVA-Agrar Verlag Allgaeu

F

Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))

Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences

Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen; Müller, Andreas (5 June 2019). Bewertung der Holzfeuchte und deren Auswirkungen In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Steffen; Franke, Bettina (22 October 2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektpartner In: 51. Fortbildungskurs S-WIN: Hochleistungs werkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.

Franke, Steffen; Franke, Bettina (2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektteam, Ergebnisse In: 51. Fortbildungskurs S-WIN: Laubholz für Hochleistungen im Bauwesen. Weinfelden, Suisse. 22.-23.10.2019.

Franke, Steffen; Franke, Bettina (5 June 2019). Technische Methoden der Zustandserfassung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Stabdübelverbindungen in Buchen-BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoff. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.

Franke, Steffen; Franke, Bettina; Müller, Andreas; Heubuch, Sebastian Pascal (4 December 2019). Stabdübelverbindungen und eingeklebte Gewindestangen in Buchen-BSH In: 25. Internationales Holzbau-Forum (IHF 2019). Congress Innsbruck Österreich. 4. - 6.12.2019.

Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (5 June 2019). Einsatz der Pressverklebung - Forschungsergebnisse In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Frischknecht, Mirjam; Bapst, Beat; Seefried, Franz R.; Signer-Hasler, Heidi; Garrick, Dorian; Stricker, Christian; Fries, Ruedi; Russ, Ingolf; Sölkner, Johann; Bieber, Anna; Strillacci, Maria G.; Gredler-Grandl, Birgit; Flury, Christine (2017). Genome-wide association studies of fertility and calving traits in Brown Swiss cattle using imputed whole-genome sequences BMC Genomics, 18(910), pp. 1-13. BioMed Central 10.1186/s12864-017-4308-z

Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.

Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735

Fromm, Ingrid (2013). Organic chocolate for the Swiss market : contract farming in the cocoa sector in Honduras In: Contract farming for inclusive market access (pp. 129-142). Rome: Food and Agriculture Organization of the United Nations

Fuerst, Axel (October 2019). Nutzen schaffen mit Industrie 4.0 Swiss Engineering STZ(10), pp. 25-27.

Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013

G

Ganne-Chédeville, Christelle (2017). Woodenboxspring - sommeil en harmonie avec la nature spirit biel/bienne, 1, pp. 8-9.

Ganne-Chédeville, Christelle (2019). Observer et imiter la nature spirit biel/bienne, 2, p. 19.

Ganne-Chédeville, Christelle (2008). Wood welding by linear friction: investigations and understanding of the physical and chemical modifications and development of an innovative technology. (Dissertation, Université Henri Poincaré - Nancy I)

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939

Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).

Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148

Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6

Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).

Ganne-Chédeville, Christelle; Pichelin, Frédéric (2007). Holzschweißen : Holz verbinden, schnell und ohne Leim Holz-Zentralblatt(40), pp. 1109-1110.

Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.

Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037

Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392

Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9

Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.

Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068

Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.

Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard (2010). Nachhaltige Reinigung von unbehandelten Holzfassaden – Ergebnisse aus laufenden Forschungsprojekten In: 42. SAH Fortbildungskurs. SAH

Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard; Lehmann, Martin (2012). Measures for the maintenance of untreated wood facades In: World Conference on Timber Engineering (WCTE 2012). Auckland, New Zealand. 15-19.07.2012.

Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002

Koumpis, Adamantios; Gees, Thomas (2020). Sex with robots: A not-so-niche market for disabled and older persons Paladyn, Journal of Behavioral Robotics, 11(1), pp. 228-232. De Gruyter doi.org/10.1515/pjbr-2020-0009

Geimer, M.; Renius, K. T.; Stirnimann, Roger (2016). Tractor Engines and Transmission Jahrbuch Agrartechnik, 28, pp. 1-11. Technische Universität Braunschweig

Geimer, M.; Renius, K.Th.; Stirnimann, Roger (2018). Motoren und Getriebe bei Traktoren Jahrbuch Agrartechnik, 30, pp. 1-10. Braunschweig: Technische Universität Braunschweig 10.24355/dbbs.084-201901211131-0

Geimer, M.; Renius, K.Th.; Stirnimann, Roger (2015). Motoren und Getriebe bei Traktoren Jahrbuch Agrartechnik, 27, pp. 1-10. Braunschweig: Technische Universität Braunschweig

Geimer, Marcus; Renius, Karl Theodor; Stirnimann, Roger (2018). Tractor Engines and Transmission Jahrbuch Agrartechnik, 29, pp. 1-11. Technische Universität Braunschweig 10.24355/dbbs.084-201801151435

Geyer, Christoph; Müller, Andreas; Wehle, Barbara (22 January 2019). Feuchteschutz sanierter Bestandswände mit Innendämmung Vergleich von Prognoseberechnung und Messung der Feuchtegehalte und Temperaturprofile In: Kolloquium Erhaltung von Bauwerken. Ostfildern, Deutschland. 22.-23.01.2019.

Geyer, Christoph; Wehle, Barbara; Melian Hernandez, Amabel (12 March 2019). Ein neues Verfahren zur Berechnung der dynamischen Wärmekapazität von Holzbalkendecken In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 151-160). Biel: FORUM HOLZBAU

Geyer, Christoph; Wehle, Barbara; Müller, Andreas (5 April 2019). Monitoring of water contents and temperatures of historical Walls with interior Insulation in Switzerland In: International WTA - PRECOM³OS symposium. Leuven, Belgium.

Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.

Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648

Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007

Gfeller, Monika; Keller, Thomas; Weisskopf, Peter; Lamandé, Mathieu; Lassen, Poul; Schjønning, Per (2014). Terranimo® – ein webbasiertes Modell zur Abschätzung des Bodenverdichtungsrisikos Landtechnik, 69(3), pp. 132-138. Landwirtschaftsverlag 10.15150/lt.2014.181

Ghazi Wakili, Karim; Stöckli, Thomas (4 September 2019). Slim building envelopes using vacuum glazing and high-performance insulation Journal of Physics: Conference Series, 1343, 012193. 10.1088/1742-6596/1343/1/012193

Giadrossich, Filippo; Cohen, Denis; Schwarz, Massimiliano; Seddaiu, Giovanna; Contran, Nicla; Lubino, Marcello; Valdés-Rodríguez, Ofelia Andrea; Niedda, Marcello (2016). Modeling bio-engineering traits of Jatropha curcas L. Ecological Engineering, 89, pp. 40-48. Elsevier 10.1016/j.ecoleng.2016.01.005

Thömen, Heiko; Gonin, Marc-André (2010). European master programs in wood science and technology In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-7). United Nations Economic Commission for Europe – Timber Committee

Groenestein, C. M.; Hutchings, N.; Haenel, H. D.; Amon, B.; Menzi, H.; Mikkelsen, M. H.; Misselbrook, T.H.; van Bruggen, C.; Kupper, Thomas; Webb, J. (2016). How do NH3 emissions relate to nitrogen use efficiency of livestock production? In: Solutions to improve nitrogen use efficiency for the world : 7th International Nitrogen Initiative Conference (INI2016). Melbourne, Australia. 4.-8. Dezember 2016.

Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035

Gut, S.; Chervet, A.; Stettler, Matthias; Weisskopf, P.; Sturny, W. G.; Lamandé, M.; Schjønning, P.; Keller, T. (2014). Seasonal dynamics in wheel load-carrying capacity of a loam soil in the Swiss Plateau Soil Use and Management, 31(1), pp. 132-141. Wiley-Blackwell 10.1111/sum.12148

Götze, Franziska; Delley, Mathilde; Denkel, Christoph; Brunner, Thomas (18 October 2018). Consumers’ acceptance of the 3D-printing technology in food (Submitted). In: FTAL Conference on Industrial Applied Data Science. Lugano. 18.-19.10.2018.

Götze, Franziska; Denkel, Christoph; Brunner, Thomas (28 July 2019). Being informed of technology when eating a supposedly 3D-printed waffle biscuit improves consumers’ attitudes towards the 3D-printing technology in food In: 13th Pangborn Sensory Science Symposium. Edinburgh. 28.07.-01.08.2019.

H

Hafner, Sasha D.; Pacholski, Andreas; Bittman, Shabtai; Burchill, William; Bussink, Wim; Chantigny, Martin; Carozzi, Marco; Génermont, Sophie; Häni, Christoph; Hansen, Martin N.; Huijsmans, Jan; Hunt, Derek; Kupper, Thomas; Lanigan, Gary; Loubet, Benjamin; Misselbrook, Tom; Meisinger, John J.; Neftel, Albrecht; Nyord, Tavs; Pedersen, Simon V.; ... (2018). The ALFAM2 database on ammonia emission from field-applied manure: Description and illustrative analysis Agricultural and Forest Meteorology, 258, pp. 66-79. Elsevier 10.1016/j.agrformet.2017.11.027

Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.

Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1

Hartmann, Katja; Eugster, Elisabeth; Fröhlich-Wyder, Marie-Therese; Jakob, Ernst; Wechsler, Daniel; Ardö, Ylva; Düsterhöft, Eva-Maria; Engels, Wim; Huppertz, Thom; Hynes, Erica R.; Cristina Perotti, Maria; Bergamini, Carina V. (2018). Swiss-Type Cheeses (Propionic Acid Cheeses) In: Global cheesemaking technology : cheese quality and characteristics (pp. 336-348). Hoboken: John Wiley & Sons 10.1002/9781119046165.ch6

Hartmann, Katja; Licitra, Giuseppe; Eugster, Elisabeth; Fröhlich-Wyder, Marie-Therese; Jakob, Ernst; Wechsler, Daniel; Maubois, Jean L.; Karatzas, Kimon-Andreas G.; Bintsis, Thomas; Alichanidis, Efstathios; Morales, Maria Belén López; Berthier, Françoise; Uzunsoy, İrem; Özer, Barbaros; Ardö, Ylva (2018). Hard Cheeses In: Global cheesemaking technology: cheese quality and characteristics (pp. 204-246). Hoboken: John Wiley & Sons 10.1002/9781119046165.ch2

Held, Michael; Schwaller, Patrick; Vaihinger, Markus; Denkel, Christoph (2017). Local Impedance Spectroscopy: A Potential Tool to Characterize the Evolution of Emulsions and Foams Journal of Food Science and Engineering, 7(5), pp. 249-261. David Publishing Co. 10.17265/2159-5828/2017.05.003

Hellwig, Niels; Graefe, Ulfert; Tatti, Dylan; Sartori, Giacomo; Anschlag, Kerstin; Beylich, Anneke; Gobat, Jean-Michel; Broll, Gabriele (2017). Upscaling the spatial distribution of enchytraeids and humus forms in a high mountain environment on the basis of GIS and fuzzy logic European Journal of Soil Biology, 79, pp. 1-13. Elsevier 10.1016/j.ejsobi.2017.01.001

Hengl, Tomislav; Nussbaum, Madlene; Wright, Marvin N.; Heuvelink, Gerard B.M.; Gräler, Benedikt (2018). Random forest as a generic framework for predictive modeling of spatial and spatio-temporal variables PeerJ, 6, e5518. 10.7717/peerj.5518

Herholz, Cornelia; Flisch, M.; Rinaldi, D.; Dreier, M.; Ammann, A.; Kopp, C. (2019). Metal analysis of horse bits using X-ray fluorescence (XRF) Pferdeheilkunde Equine Medicine, 35(3), pp. 234-239. Hippiatrika Verlag 10.21836/PEM20190304

Heubuch, Sebastian Pascal; Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Eingeklebte Gewindestangen in Buchen BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.

Hofstetter, Matthias; Gees, Thomas; Riedl, Reinhard; Koumpis, Adamantios (2019). Sustainable ICT equals not ICT for sustainability Sustainable Futures, 2, p. 100007. Elsevier 10.1016/j.sftr.2019.100007

Hofstetter, Matthias; Gees, Thomas; Riedl, Reinhard; Koumpis, Adamantios (2 May 2020). Teaching Business Information Systems in 2020s: Pitfalls, Challenges and Some Methodological Ideas for Testing In: CSEDU 2020 - 12th International Conference on Computer Supported Education 1 (pp. 510-517). Portugal: SCITEPRESS

Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.

Hudson, Lawrence N.; Newbold, Tim; Contu, Sara; Hill, Samantha L. L.; Lysenko, Igor; De Palma, Adriana; Phillips, Helen R. P.; Alhusseini, Tamera I.; Bedford, Felicity E.; Bennett, Dominic J.; Booth, Hollie; Burton, Victoria J.; Chng, Charlotte W. T.; Choimes, Argyrios; Correia, David L. P.; Day, Julie; Echeverría-Londoño, Susy; Emerson, Susan R.; Gao, Di; Garon, Morgan; ... (2016). The database of the PREDICTS (Projecting Responses of Ecological Diversity In Changing Terrestrial Systems) project Ecology and Evolution, 7(1), pp. 145-188. Wiley 10.1002/ece3.2579

Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.

Hurst, Andreas (2008). Holzhausbau in anderen Klimaregionen In: 40. Fortbildungskurs der Schweizerische Arbeitsgemeinschaft für Holzforschung (pp. 255-264). Zürich: SAH

Häni, Christoph (8 April 2018). Evaluation of including ammonia dry deposition in backward Lagrangian stochastic modelling Geophysical Research Abstracts, 20(19731).

Häni, Christoph; Sintermann, Jörg; Kupper, Thomas; Neftel, Albrecht (2015). Ammonia emission after slurry application to grassland In: RAMIRAN 2015 : 16th International Conference Rural-Urban Symbiosis (pp. 293-296). Hamburg: TuTech Verlag

Volkmer, Thomas; Höltschi, Christoph (2009). Holzfassaden verändern ihre Farbe Applica : Die Zeitschrift für das Maler- und Gipsergewerbe, 5, pp. 12-16. Schweizerischer Maler- und Gipserunternehmer-Verband ; Schweizerischer Maler- und Gipsermeister-Verband

J

Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839

K

Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444

Keller, T.; Ruiz, S.; Stettler, Matthias; Berli, M. (2016). Determining Soil Stress beneath a Tire: Measurements and Simulations Soil Science Society of America Journal, 80(3), pp. 541-553. Soil Science Society of America 10.2136/sssaj2015.07.0252

Khojasteh-Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products European Journal of Wood and Wood Products, 78(3), pp. 593-603. Springer 10.1007/s00107-020-01519-8

Klingemann, Harald; Flückiger, Michael; Bongard, Thierry; Büchi, Marlen Eva; Carrara, Marco (2020). Design and Content Quality of Alcohol-Related German, French and Italian Self-Tracking Applications Substance Use & Misuse, 55(5), pp. 851-859. Taylor & Francis 10.1080/10826084.2019.1708117

Kolb, Hanspeter; Beetschen, Mirko (2019). Vielfalt im Holzbau Die schönsten Seiten des Kantons Bern: Vol. 26. Bern: Stämpfli Verlag AG

Kolb, Hanspeter; Volkmer, Thomas (2019). Pour du bois résistant mieux au feu et à la lumière spirit biel/bienne, 2, pp. 8-9.

Kopf, Katrin Annika (2018). Adjusting Bioactive Functions of Dairy Products via Processing In: Koca, Nurcan (ed.) Technological Approaches for Novel Applications in Dairy Processing (pp. 109-126). London: IntechOpen 10.5772/intechopen.72927

Kopf, Katrin Annika; Eugster, Elisabeth (2019). Vergleich der Nährstoffgehalte von Kuhmilch mit Schaf- und Ziegenmilch sowie pflanzenbasierten Getränken Schweizer Zeitschrift für Ernährungsmedizin, 17(3), pp. 15-19. Rosenfluh Publikationen

Kopf, Katrin Annika; Schwander, Flurina; Gijs, Martin; Vergères, Guy; Portmann, Reto; Egger, Lotti (2014). Impact of milk processing on the generation of peptides during digestion International Dairy Journal, 35(2), pp. 130-138. Elsevier 10.1016/j.idairyj.2013.10.012

Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002

Kuhn, Fabienne; Spichiger, Andreas; Riedl, Reinhard (2013). Sensor data meets social networks reflecting on benefits in the case of a patient room In: CD-ARES 2013 : availability, reliability, and security in information systems and HCI : IFIP WG 8.4, 8.9, TC 5 International Cross-Domain Conference. Lecture Notes in Computer Sciencebook series (LNCS): Vol. 8127 (pp. 1-15). Heidelberg: Springer 10.1007/978-3-642-40511-2_1

Kupper, Thomas (31 October 2018). Bei windstillem, kühlem Wetter güllen. Ammoniak (1/8): Emissionen reduzieren bei der Hofdüngerausbringung Schweizer Bauer, 172(86), p. 18. Schweizer Bauer

Kupper, Thomas (12 December 2018). Für Schwimmschicht brauchts genug Gülle. Ammoniak (7/8): Emissionen reduzieren mit einer natürlichen Schwimmschicht im Güllelager Schweizer Bauer, 172(98), p. 18. Schweizer Bauer

Kupper, Thomas (26 May 2018). Leserbriefe: «Ausbringtechnik auch massgebend». Zum Artikel «Nach dem Schnitt 20 bis 30 m3 Gülle» im «Schweizer Bauer» vom 23. Mai Schweizer Bauer, 172(41), p. 3. Schweizer Bauer

Kupper, Thomas (7 November 2018). Sauberes Gras und saubere Luft beim Güllen. Ammoniak (2/8): Die Ausbringtechnik von Gülle optimieren Schweizer Bauer, 172(88), p. 18. Schweizer Bauer

Kupper, Thomas (August 2018). Leserbrief: «Tiefer Einblick in Kompostierungs-Ställe» Die Grüne, 154(8), p. 96. Schweizer Agrarmedien

Kupper, Thomas (5 December 2018). Weitgehend dichte Abdeckung ist am besten. Ammoniak (6/8): Emissionen reduzieren mit der Abdeckung von Güllelagern Schweizer Bauer, 172(96), p. 20. Schweizer Bauer

Kupper, Thomas; Häni, Christoph; Eugster, R.; Sintermann, J. (2017). Ammonia emissions from slurry stores In: EmiLi 2017 : Proceedings of the 3rd International Symposium on Emission of Gas and Dust from Livestock, Saint-Malo, 21-24 May 2017 (pp. 29-32). INRA

Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag

Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST

L

Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2

Laube, Annett; Hassenstein, Gerhard; Kunz, Marc André; Spichiger, Andreas (13 September 2017). eCH-0170 Mode identites electroniques V2.0

Laube, Annett; Koenig, Reto (30 November 2017). Secure Two-Factor Authentication with SwissPass Crypto Card: A Case Study In: Future Technologies Conference (FTC). Vancouver. 2017.

Laube, Annett; Kunz, Marc; Hassenstein, Gerhard; Leimer, Bojan (5 June 2020). eCH-0224 Modèles d’architecture Identity Federation impliquant un Broker In: eCH Standards. eCH Verein

Laube, Annett; Spichiger, Andreas; Kunz, Marc André; Kessler, Thomas; Gruoner, Torsten; Heerkens, Marc (7 February 2019). eCH-0107 Principes de conception pour la gestionde l’identité et de l’accès (IAM), V3.0 eCH Verein

Laube, Annett; Spichiger, Andreas; Kunz, Marc André; Kessler, Thomas; Müller, Adrian (30 November 2018). eCH-0219 Glossaire IAM In: eCH Standards. eCH Verein

Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310

Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8

Lehmann, Martin (2009). Verstärkung von Holz mittels vorgespannten CFK-Lamellen In: Fortbildungskurs der SAH: Werkstoffkombinationen – ein Mehrwert für Holz (pp. 1-12). SAH

Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus

Lehmann, Martin; Clénin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Baublatt : aktuelle Informationen für die Schweizer Baubranche(41), pp. 28-30. Docu Media Schweiz

Ehrhart, Thomas; Lehmann, Martin; Frangi, Andrea (2019). European beech ( Fagus sylvatica L .) glued laminated timber : Lamination strength grading , production and mechanical properties In: International Scientific Conference on Hardwood Processing, ISCHP 19 (pp. 252-267). TU Delft

Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.

Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759

Richter, Klaus; Lehmann, Martin; Properzi, Milena (2004). Long-term behaviour of pre-stressed timber-CFRP composites In: Enhancing bondline performance : proceedings of the final conference in COSTE 34 "Bonding of timber" (pp. 80-88). Lövér-Print Nyomdaipari

Lehmann, Martin; Vallée, T.; Tannert, T.; Brunner, Maurice Yaw (2009). Adhesively bonded joints composed of wooden load-bearing elements In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.

Leimer, Bojan; Hassenstein, Gerhard; Laube, Annett; Kunz, Marc (5 June 2020). eCH-0225 Identity Federations impliquant un Broker – Implémentation avec OIDC In: eCH Standards. eCH Verein

Letsch, Bernhard (2009). Forschungsprojekt Fassaden Holzbaumarktschweiz(1), pp. 12-13. FS Media

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2010). Reinigung von unbehandelten Holzfassaden Holzbaumarktschweiz : Fachmagazin für Holzbau, Architektur, Innenausbau, Produktion, 5, pp. 12-14.

Licitra, Giuseppe; Hynes, Erica R.; Cristina Perotti, Maria; Bergamini, Carina V.; Eugster, Elisabeth; Fröhlich-Wyder, Marie-Therese; Jakob, Ernst; Wechsler, Daniel (2018). Extra-Hard Cheeses In: Global cheesemaking technology: cheese quality and characteristics (pp. 194-203). Hoboken: John Wiley & Sons 10.1002/9781119046165.ch1

Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001

Läuchli, Matthias; Bäschlin, Nathalie; Hoess, Anita; Fankhauser, Thomas; Palmbach, Cornelius; Ryser, Marcel (2014). Packing systems for paintings: Damping capacity in relation to transport-induced shock and vibration In: ICOM-CC 17th Triennial Conference. Melbourne, Australia. 15.-17.9.2014.

Läuchli, Matthias; Bäschlin, Nathalie; Palmbach, Cornelius; Fankhauser, Thomas; Ryser, Marcel; Sautter, Katharina (2017). Strategy of measurement and data analysis for monitoring during the transportation of paintings (Unpublished). In: Eastern Analytical Symposium (EAS). Plainsboro Township, NJ. 13. - 15.11.2017.

Läuchli, Matthias; Bäschlin, Nathalie; Palmbach, Cornelius; Ryser, Marcel; Fankhauser, Thomas; Hoess, Anita (2015). Vibrationen – kleine Erschütterungen millionenfach Zeitschrift für Kunsttechnologie und Konservierung, 29(2), pp. 223-236.

López‐Vázquez, Esperanza; Brunner, Thomas; Siegrist, Michael (2012). Perceived risks and benefits of nanotechnology applied to the food and packaging sector in México British Food Journal, 114(2), pp. 197-205. Emerald Publishing Limited 10.1108/00070701211202386

Lüdin, Petra; Von Ah, Ueli; Rollier, Deborah; Roetschi, Alexandra; Eugster, Elisabeth (2016). Lactic Acid Bacteria as Markers for the Authentication of Swiss Cheeses CHIMIA International Journal for Chemistry, 70(5), pp. 349-353. Schweizerische Chemische Gesellschaft 10.2533/chimia.2016.349

M

Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088

Markantonatou, Stella; Donig, Simon; Pavlidis, George; Gees, Thomas; Koumpis, Adamantios (2020). Ten Challenges for Digital Humanities and the Way Forward: Revisited From the Social Context In: Applying Innovative Technologies in Heritage Science. IGI Global 10.4018/978-1-7998-2871-6

Matter, Philipp; Gees, Thomas; Brechbühler Peskova, Marie; Adriaensen, Benjamin; Riedl, Reinhard; Koumpis, Adamantios (2 May 2020). Enhancing the Digital Learning Experience: The Case of the Digital Lab of the Berner Fachhochschule In: CSEDU 2020 - 12th International Conference on Computer Supported Education 1 (pp. 171-177). Portugal: SCITEPRESS

Mayer, Ingo (2019). VOC-Emissionen aus mehrschichtigen Wand- und Deckenelementen in Holz-Rahmenbauweise HolzBauSpezial Bauphysik & Gebäudetechnik, 10, pp. 421-431. Forum Holzbau

Mayer, Ingo (February 2020). Des animaux sains grâce aux tanins du bois suisse spirit biel/bienne : das Magazin der technischen Disziplinen der Berner Fachhochschule = le magazine des disciplines techniques de la Haute école spécialisée bernoise(1) Biel/Bienne: Berner Fachhochschule BFH, Departement Architektur, Holz und Bau, Departement Technik und Informatik

Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27.

Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).

Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.

Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21.

Mayer, Ingo; Selbmann, Karl-Heinz (2019). 3D drucken mit Holz Spirit biel/bienne, 1, p. 16.

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Moser, Aline; Wüthrich, Daniel; Bruggmann, Rémy; Eugster, Elisabeth; Meile, Leo; Irmler, Stefan (2017). Amplicon Sequencing of the slpH Locus Permits Culture-Independent Strain Typing of Lactobacillus helveticus in Dairy Products Frontiers in Microbiology, 8(1380), pp. 1-11. Frontiers Media 10.3389/fmicb.2017.01380

Müller, Andreas (1 September 2019). Zerstörungsfreie Prüfmethoden Wir Holzbauer, 6, pp. 34-37.

Müller, Andreas (1 March 2019). Zustandserfassung von Holzkonstruktionen Wir Holzbauer, 3, pp. 30-33.

Müller, Andreas; Amstutz Hugi, Corinne (1 May 2019). Methoden der Zustandserfassung Wir Holzbauer, 4, pp. 30-33.

Müller, Andreas; Franke, Bettina (2019). Prüfung von geklebten Vollholzprodukten Wir Holzbauer, 5, pp. 26-29.

Müller, Andreas; Franke, Bettina (5 June 2019). Zustandserfassung - Einführung und Methodik In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

N

Navi, Parviz; Pichelin, Frédéric (2008). Difficulties of the modelling of wood forming processes In: Dresdner Werkzeugmaschinen-Fachseminar (2008). Dresden, Germany. 11.-12.12.2008.

Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.

Ammann, Samuel; Niemz, Peter (2015). Specific fracture energy at glue joints in European beech wood International Journal of Adhesion and Adhesives, 60, pp. 47-53. Elsevier 10.1016/j.ijadhadh.2015.03.007

Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH

Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press

Niemz, Peter; Sonderegger, Walter (2017). Holzphysik München, Deutschland: Carl Hanser Verlag GmbH & Co. KG 10.3139/9783446445468

Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034

Näher, Thomas; Thömen, Heiko; Burgert, Ingo (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft Zürich: Swiss Wood Innovation Network S-Win

O

Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1

P

Pacheco, J.; Pittet, A.; Ampuero Kragten, S.; Arrigo, Y. (2018). Verdaulichkeit der organischen Substanz: Vergleich von In-vivo- und In-vitro-Bestimmungen Agrarforschung Schweiz, 9(3), pp. 92-97. Agroscope Liebefeld-Posieux ALP

Properzi, Milena; Pattis, Reto; Pichelin, Frédéric (2008). Wood ash as a resource for the production of innovative composite materials In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 2.-5.06.2008.

Pfister, Mirjam; Stähli, Roland (2019). Digitale Medien an Berufsfachschulen – Wo steht die Schweiz? B & B Agrar, pp. 1-3. Aid Infodienst - Ernaehrung, Landwirtschaft, Verbraucherschutz e.V.

Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832

Pichelin, Frédéric (2016). «Cocoboard» panneaux biosourcés à base de fibres de coco spirit biel/bienne, 2, p. 22. BFH

Ammann AG (2004). Connecting element (EP 1 437 040 A1)

JP (2006). Unfolding anchor (JP2006153277 (A))

Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.

Pielhop, Thomas; Amgarten, Janick; von Rohr, Philipp Rudolf; Studer, Michael Hans-Peter (2016). Steam explosion pretreatment of softwood: the effect of the explosive decompression on enzymatic digestibility Biotechnology for Biofuels, 9(1) BioMed Central 10.1186/s13068-016-0567-1

Pielhop, Thomas; Reinhard, Claudio; Hecht, Christian; Del Bene, Luca; Studer, Michael Hans-Peter; Rudolf von Rohr, Philipp (2017). Application potential of a carbocation scavenger in autohydrolysis and dilute acid pretreatment to overcome high softwood recalcitrance Biomass and Bioenergy, 105, pp. 164-173. Elsevier 10.1016/j.biombioe.2017.07.005

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.

Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305

Placencia, Maria Inés; Pizzi, Antonio; Pichelin, Frédéric (June 2011). Linear friction welding for wood, a parameters study for up-scaled assemblies In: CIMAD 11 – 1º Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal. 7-9 Jun 2011.

Probst, Stefan; Wasem, Daniela; Kobel, Desirée; Zehetmeier, Monika; Flury, Christine (2019). Treibhausgasemissionen aus der gekoppelten Milch- und Fleischproduktion in der Schweiz Agrarforschung Schweiz, 10(11-12), pp. 440-445. Agroscope Liebefeld-Posieux ALP

Probst, Stefan; Wasem, Daniela; Kobel, Desirée; Zehetmeier, Monika; Flury, Christine (2019). Émissions de gaz à effet de serre de la production combinée de lait et de viande Recherche agronomique suisse, 10(11-12), pp. 440-445. Agroscope

Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA

Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services

Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004

Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001

Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric (2008). Strengthening of timber structures using pre-stressed carbon fibre lamellas In: MEDACHS Conference (2008). Lisbon, Portugal. 20.-23.01.2008.

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0

Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.

Q

Zürcher, Ernst; Quartey, G.A (2008). Durability investigations of lesser-known Ghanaian wood species In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.

R

Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.

Remmele, Edgar; Eckel, Henning; Pickel, Peter; Rathbauer, Josef; Reinhold, Gerd; Stirnimann, Roger; Hörner, Roland; Uppenkamp, Norbert (2020). Alternative Antriebssysteme für Landmaschinen KTBL-Schrift: Vol. 519. Darmstadt: Kuratorium für Technik und Bauwesen in der Landwirtschaft e.V.

Renius, K.Th.; Geimer, M.; Stirnimann, Roger (2014). Motoren und Getriebe bei Traktoren Jahrbuch Agrartechnik, 26, pp. 1-11. Braunschweig: Technische Universität Braunschweig

Renius, Karl Theodor; Stirnimann, Roger (2017). Gesamtentwicklung Traktoren Jahrbuch Agrartechnik, 29, pp. 1-11. Technische Universität Braunschweig 10.24355/dbbs.084-201801151432

Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.

Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management

Rivera-Romero, Octavio; Stathis, Konstantinidis; Denecke, Kerstin; Gabarrón, Elia; Petersen, Carolyn; Househ, Mowafa; Merolli, Mark; Mayer, Miguel Ángel (2020). Ethical Considerations for Participatory Health through Social Media: Healthcare Workforce and Policy Maker Perspectives Yearbook of Medical Informatics, 29, pp. 203-208. Thieme 10.1055/s-0040-1701981

Zürcher, Ernst; Rogenmoser, C. (2008). Exploring biodiversity at the wood level – Timber identification and structure-properties relationships In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.

Zürcher, Ernst; Rogenmoser, Christian (2010). Considering reversible variations in wood properties : possible applications in the choice of the tree-felling date ? In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.

Zürcher, Ernst; Rogenmoser, Christian; Quartney, Gladys A. (November 2009). Wenig bekannte Holzarten Westafrikas Holzforschung Schweiz, 2, pp. 12-14. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH

Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.

S

Sales, Juliano; Tzafilkou, Katerina; Koumpis, Adamantios; Gees, Thomas; Zimmermann, Heinrich; Protogeros, Nikolaos; Handschuh, Siegfried (8 June 2020). Let the End User in Peace: UX and Usability Aspects Related to the Design of Tutoring Systems (In Press). In: ITS2020 - 16th Intelligent Tutoring Systems Conferences. Springer’s Lecture Notes in Computer Science series (LNCS). Springer

Samuel, Reichel; Foston, Marcus; Jaing, Nan; Cao, Shilin; Allison, Lenong; Studer, Michael Hans-Peter; Wyman, Charles; Ragauskas, Arthur J. (2011). HSQC (heteronuclear single quantum coherence) 13C–1H correlation spectra of whole biomass in perdeuterated pyridinium chloride–DMSO system: An effective tool for evaluating pretreatment Fuel, 90(9), pp. 2836-2842. Elsevier 10.1016/j.fuel.2011.04.021

Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004

Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072

Schiere, Marcus Jacob; Franke, Bettina; Scharmacher, Florian (5 June 2019). Leistungsfähigkeit der Klebefuge in Brettschichtholz In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.

Schjønning, Per; Stettler, Matthias; Keller, Thomas; Lassen, Poul; Lamandé, Mathieu (2015). Predicted tyre–soil interface area and vertical stress distribution based on loading characteristics Soil and Tillage Research, 152, pp. 52-66. Elsevier 10.1016/j.still.2015.03.002

Schjønning, Per; van den Akker, Jan J.H.; Keller, Thomas; Greve, Mogens H.; Lamandé, Mathieu; Simojoki, Asko; Stettler, Matthias; Arvidsson, Johan; Breuning-Madsen, Henrik (2015). Driver-Pressure-State-Impact-Response (DPSIR) Analysis and Risk Assessment for Soil Compaction—A European Perspective In: Advances in Agronomy. Advances in Agronomy: Vol. 133 (pp. 183-237). Elsevier 10.1016/bs.agron.2015.06.001

Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2

Zürcher, Ernst; Schlaepfer, R.; Giudici, F. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste

Schmid, Michael; Muri, Jonathan; Melidis, Damianos; Varadarajan, Adithi R.; Somerville, Vincent; Wicki, Adrian; Moser, Aline; Bourqui, Marc; Wenzel, Claudia; Eugster, Elisabeth; Frey, Juerg E.; Irmler, Stefan; Ahrens, Christian H. (2018). Comparative Genomics of Completely Sequenced Lactobacillus helveticus Genomes Provides Insights into Strain-Specific Genes and Resolves Metagenomics Data Down to the Strain Level Frontiers in Microbiology, 9(63), pp. 1-20. Frontiers Media 10.3389/fmicb.2018.00063

Schmidt, Henrik; Benthien, Jan T.; Thömen, Heiko (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels European Journal of Wood and Wood Products, 71(5), pp. 591-597. Springer 10.1007/s00107-013-0719-y

Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1

Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003

Scholz, Johannes; De Meyer, Annelies; Marques, Alexandra S.; Pinho, Tatiana M.; Boaventura-Cunha, José; Van Orshoven, Jos; Rosset, Christian; Künzi, Julien; Kaarle, Jaakola; Nummila, Kaj (2018). Digital Technologies for Forest Supply Chain Optimization: Existing Solutions and Future Trends Environmental Management, 62(6), pp. 1108-1133. Springer 10.1007/s00267-018-1095-5

Schwander, Flurina; Kopf, Katrin Annika; Buri, Caroline; Portmann, Reto; Egger, Lotti; Chollet, Magali; McTernan, Philip G.; Piya, Milan K.; Gijs, Martin A. M.; Vionnet, Nathalie; Pralong, François; Laederach, Kurt; Vergères, Guy (2014). A Dose-Response Strategy Reveals Differences between Normal-Weight and Obese Men in Their Metabolic and Inflammatory Responses to a High-Fat Meal The Journal of Nutrition, 144(10), pp. 1517-1523. Oxford University Press 10.3945/jn.114.193565

Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries

Shahab, Robert; Luterbacher, Jeremy S.; Brethauer Studer, Simone; Studer, Michael Hans-Peter (2018). Consolidated bioprocessing of lignocellulosic biomass to lactic acid by a synthetic fungal-bacterial consortium Biotechnology and Bioengineering, 115(5), pp. 1207-1215. Wiley 10.1002/bit.26541

Shahab, Robert L.; Brethauer Studer, Simone; Luterbacher, Jeremy S.; Studer, Michael Hans-Peter (2020). Engineering of ecological niches to create stable artificial consortia for complex biotransformations Current Opinion in Biotechnology, 62, pp. 129-136. Elsevier 10.1016/j.copbio.2019.09.008

Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.

Sousa, A.; Eugster, Elisabeth; Kopf, Katrin Annika (2018). Boissons végétales sous la loupe Alimenta : Fachzeitschrift fuer die Lebensmittelwirtschaft(5), pp. 24-26. Publi-Lactis AG

Sousa, Angelica; Kopf, Katrin Annika (2017). Nutritional Implications of an Increasing Consumption of Non-Dairy Plant-Based Beverages Instead of Cow's Milk in Switzerland Advances in Dairy Research, 05(04), pp. 1-7. Longdom Publishing 10.4172/2329-888X.1000197

Stalder, Urs (2019). Einbruchhemmung bei Fenstern - was wichtig ist Sicherheitsforum, 6, pp. 10-16.

Steich, Kelly; Kamel, Mina; Beardsley, Paul; Obrist, Martin K.; Siegwart, Roland; Lachat, Thibault (2016). Tree cavity inspection using aerial robots In: IROS 2016 : 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (pp. 4856-4862). Piscataway, NJ: IEEE 10.1109/IROS.2016.7759713

Stettler, Matthias (2018). Boden unter Druck durch Landmaschinen: Immer grösser, immer schneller, immer besser? Thurgauer Bauer(8), pp. 20-22. Verband Thurgauer Landwirtschaft

Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.

Strautmann, Jean; Noël, Marion; Volkmer, Thomas (October 2013). Surface qualification of weathered wood In: Joint COST FP0904 & FP1006 International Proceeding of the Workshop on characterization of modified wood in relation to wood bonding and coating performance. Rogla, Slovenia. 16-18 Oct 2013.

T

Thömen, Heiko (2019). Rohstoffe effizienter einsetzen - das Modell dazu spirit biel/bienne, 1, pp. 14-15.

Thömen, Heiko (2017). Légèreté pour le mobilier spirit biel/bienne, 1, pp. 24-25.

Shalbafan, Ali; Thömen, Heiko (2020). Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features Applied Sciences, 10(2), p. 593. MDPI 10.3390/app10020593

Benthien, Jan T.; Thömen, Heiko (2013). Effects of agglomeration and pressing process on the properties of flat pressed WPC panels Journal of Applied Polymer Science, 129(6), pp. 3710-3717. John Wiley & Sons, Ltd 10.1002/app.39155

Thömen, Heiko; Homerin, Benoît; Bernardy, Gregor; Steffen, Andreas (2019). Dichte von Holzwerkstoffen in Echtzeit vorhersagen Holz-Zentralblatt(21), pp. 446-447.

Thömen, Heiko; Job, Charles (2019). Hochflexible Beleuchtungslösungen in Möbeln spirit biel/bienne, 2, pp. 16-17.

Thömen, Heiko; Walther, Thomas (2010). Grundlegende Untersuchungen zur Herstellung und Struktur von Holzwerkstoffen [Textbook] . Biel/Bienne, Schweiz: Berner Fachhochschule Architektur, Holz und Bau

Tsiranidou, Elsa; Bernikola, Eirini; Tornari, Vivi; Fankhauser, Thomas; Läuchli, Matthias; Bäschlin, Nathalie; Palmbach, Cornelius (2013). Studying transportation effects on canvas paintings by full field digital holographic techniques In: LACONA IX - Lasers in the conservation of artworks. London. 7. - 10. Sept. 2011.

Lueg, Christopher; Twidale, Michael (2018). Designing for Humans, Not Robots (or Vulcans) Library Trends, 66(4), pp. 409-421. Johns Hopkins University Press https://doi.org/10.1353/lib.2018.0010

ten Damme, L.; Stettler, Matthias; Pinet, F.; Vervaet, P.; Keller, T.; Munkholm, L. J.; Lamandé, M. (September 2018). The contribution of tyre evolution to the reduction of soil compaction risks In: Proceedings of the 21th ISTRO International Conference (p. 425). Dundee, UK: International Soil Tillage Research Organization (ISTRO)

ten Damme, Loraine; Stettler, Matthias; Pinet, François; Vervaet, Patrick; Keller, Thomas; Munkholm, Lars Juhl; Lamandé, Mathieu (2019). The contribution of tyre evolution to the reduction of soil compaction risks Soil and Tillage Research, 194, p. 104283. Elsevier 10.1016/j.still.2019.05.029

V

Vallée, T.; Tannert, T.; Lehmann, Martin; Brunner, Maurice Yaw (July 2009). Probabilistic strength prediction of adhesively bonded joints composed of wooden adherends In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.

Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4

Vergères, Guy; Bogicevic, Biljana; Buri, Caroline; Carrara, Sandro; Chollet, Magali; Corbino-Giunta, Linda; Egger, Lotti; Gille, Doreen; Kopf, Katrin Annika; Laederach, Kurt; Portmann, Reto; Ramadan, Qasem; Ramsden, Jeremy; Schwander, Flurina; Silacci, Paolo; Walther, Barbara; Gijs, Martin (2012). The NutriChip project – translating technology into nutritional knowledge British Journal of Nutrition, 108(5), pp. 762-768. Cambridge University Press 10.1017/S0007114512002693

Vervaet, P.; Stettler, Matthias; Pinet, F. (September 2018). Evolution of agricultural tire technologies and their Impact on soil compaction In: Proceedings of the 21th ISTRO International Conference (pp. 224-226). Dundee, UK: International Soil Tillage Research Organization (ISTRO)

Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15.

Volkmer, Thomas (2007). Schimmelpilze auf beschichteten Holzfassaden: chemische und physikalische Einflussfaktoren (Dissertation, Albert-Ludwigs-Universität Freiburg)

Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019

Volkmer, Thomas; Höltschi, Christoph (2009). Zahn der Zeit Immobilia : Zeitschrift für die Immobilienwirtschaft(6), pp. 37-38. SVIT Verlag AG

Volkmer, Thomas; Landmesser, H. (2007). Pilze auf Holzfassaden Berner Fachhochschule Architektur, Holz und Bau

Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.

Brunner, Thomas; van der Horst, Klazine; Siegrist, Michael (2010). Convenience food products. Drivers for consumption Appetite, 55(3), pp. 498-506. Elsevier 10.1016/j.appet.2010.08.017

Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12.

von Steiger, Adrian (22 November 2019). Die Klarinette mit Elektromotoren und Computer Anzeiger Bern

W

Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4

Wehle, Barbara; Geyer, Christoph; Melian Hernandez, Amabel (12 March 2019). Schall- und Luftdichthe¡t von Fenstern in der Renovation In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 377-388). Biel: FORUM HOLZBAU

Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD

Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757

Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679

Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097

Wieland, Stefanie; Properzi, Milena; Pichelin, Frédéric; Gfeller, Balz (2005). Einsatz des linearen Vibrationsschweissens in der Holzindustrie In: Frauenhofer WKI Workshop: Klebstoffe für Holzprodukte. Braunschweig, Germany. 10-11 Nov 2005.

Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa

Thömen, Heiko; Wirth, Filipp (2018). Le bien-être – grâce à la réalité virtuelle ? spirit biel/bienne, 3, p. 25.

Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644

Wüthrich, Daniel; Irmler, Stefan; Berthoud, Hélène; Guggenbühl, Barbara; Eugster, Elisabeth; Bruggmann, Rémy (2018). Conversion of Methionine to Cysteine in Lactobacillus paracasei Depends on the Highly Mobile cysK-ctl-cysE Gene Cluster Frontiers in Microbiology, 9 Frontiers 10.3389/fmicb.2018.02415

Z

Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.

Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152

Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.

This list was generated on Wed Jul 8 03:30:49 2020 CEST.
Provide Feedback