Items where Subject is "Q Science > QD Chemistry"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | D | F | G | H | J | K | L | M | N | O | P | R | S | T | V | W | Y
Number of items at this level: 76.

A

Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641

Aeby, P.; Andrey, C.; Mattei, G.; Kupper, Thomas; Reidy, Beat (2017). Auswirkungen auf die Ammoniak-Verluste und den Ertrag von Wiesen UFA-Revue, 10, pp. 22-24. Fenaco

Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5

B

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21.

Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001

Boonstra, M.; Pizzi, A.; Ganne-Chédeville, Christelle; Properzi, M.; Leban, J. M.; Pichelin, Frédéric (2006). Vibration welding of heat-treated wood Journal of Adhesion Science and Technology, 20(4), pp. 359-369. 10.1163/156856106776381758

D

Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020

F

Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Moisture content and moisture-induced stresses of large glulam members: laboratory tests, in-situ measurements and modelling Wood Material Science & Engineering, 14(4), pp. 243-252. Taylor & Francis 10.1080/17480272.2018.1551930

G

Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148

Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.

Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419

Grosse, C.; Noël, Marion; Thevenon, M.; Gérardin, P. (2018). FTIR-ATR monitoring of chemical changes of thermo-chemically modified beech wood degraded by brown-rot fungus In: IRG49 - International Research Group on Wood Protection. Johannesburg, South Africa. 29.04-03.05.2018.

Grosse, Charlotte; Noël, Marion; Rautkari, Lauri; Gerardin, Philippe (2017). Influence of hygro-thermal treatment temperature and duration on dimensional stabilisation of wood modified with poly (butylene succinate) In: Scientific Conference on Wood Protection. Ghent, Belgium. 04.-08.06.2017.

Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035

Grosse, Charlotte; Thévenon, Marie France; Noël, Marion; Gerardin, Philippe (2016). Optimising wood chemical modification with lactic acid oligomers by screening of processing conditions and chemical additives In: 47th IRG Annual Meeting. Lisbon, Portugal. 15.-19.05.2016.

H

Mayer, Ingo; Hinterleitner, Christina (2018). Décontaminer les biens culturels spirit biel/bienne, 1, pp. 18-19.

J

Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839

K

Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444

Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003

L

Landowski, Christopher P.; Kopf, Katrin Annika; Suzuki, Yoshiro; Hediger, Matthias A. (2011). Chemical Inhibitors of the Calcium Entry Channel TRPV6 Pharmaceutical Research, 28(2), pp. 322-330. Springer 10.1007/s11095-010-0249-9

Lehmann, Martin; Clerc, Gaspard; Lehringer, C.; Strahm, T.; Volkmer, Thomas; ; (2018). Investigation of the bond quality and the finger joint strength of beech glulam In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.

Lehmann, Martin; Volkmer, Thomas (2014). Investigation of the bond quality of hardwoods with micro structured surfaces In: 68th FPS International Convention. Quebec City, Canada. 10.-13.08.2014.

Lehmann, Martin; Volkmer, Thomas (2014). Influence of micro structured surface on the bond quality of hardwood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001

Lüdin, Petra; Von Ah, Ueli; Rollier, Deborah; Roetschi, Alexandra; Eugster, Elisabeth (2016). Lactic Acid Bacteria as Markers for the Authentication of Swiss Cheeses CHIMIA International Journal for Chemistry, 70(5), pp. 349-353. Schweizerische Chemische Gesellschaft 10.2533/chimia.2016.349

M

Mayer, Ingo (2019). VOC-Emissionen aus mehrschichtigen Wand- und Deckenelementen in Holz-Rahmenbauweise HolzBauSpezial Bauphysik & Gebäudetechnik, 10, pp. 421-431. Forum Holzbau

Mayer, Ingo (2014). Gerüche und Emissionen von Parkett- und Steinbodenölen In: 16th Workshop "Geruch und Emissionen bei Kunststoffen". Kassel, Germany. 24.-25.03.2014.

Mayer, Ingo (February 2020). Des animaux sains grâce aux tanins du bois suisse spirit biel/bienne : das Magazin der technischen Disziplinen der Berner Fachhochschule = le magazine des disciplines techniques de la Haute école spécialisée bernoise(1) Biel/Bienne: Berner Fachhochschule BFH, Departement Architektur, Holz und Bau, Departement Technik und Informatik

Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27.

Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.

Mayer, Ingo; Nie, Yunyun (2015). Fully automated, on-line micro-scale chamber method for determination of volatile organic compound emissions from building products In: 17th Workshop “Geruch und Emissionen bei Kunststoffen“. Kassel, Germany. 16.-17.03.2015.

Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21.

Metzger, Christoph; Sanahuja, Solange; Behrends, Lisa; Sängerlaub, Sven; Lindner, Martina; Briesen, Heiko (2018). Efficiently Extracted Cellulose Nanocrystals and Starch Nanoparticles and Techno-Functional Properties of Films Made Thereof Coatings, 8(4), p. 142. MDPI 10.3390/coatings8040142

Miesbauer, Oliver; Kiese, Sandra; Hellstern, Sabrina; Sharma, Kyra; Sanahuja, Solange; Kücükpinar, Esra; Noller, Klaus (2012). Kombination von Barrierelacken mit anorganischen Schichten zur Anwendung in flexiblen Verkapselungsmaterialien für Vakuumisolationspaneele In: Thementage Grenz- und Oberflächentechnik: ThGOT 2012 und 3. Optik-Kolloquium Dünne Schichten in der Optik (pp. 42-46). Freising: Fraunhofer IVV

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

N

Shalbafan, Ali; Nadali, Amin; Thömen, Heiko (2020). A Multifunctional Mineral Binder for Plywood Production: The Effect of Manufacturing Parameters on Bonding Quality Materials, 13(10), p. 2360. 10.3390/ma13102360

Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.

Niemz, Peter (2016). Einfluss von Feuchteschwankungen bei Verklebungen Holz-Zentralblatt, pp. 1219-1221.

Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH

Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034

O

Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1

P

Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832

Pichelin, Frédéric (2016). «Cocoboard» panneaux biosourcés à base de fibres de coco spirit biel/bienne, 2, p. 22. BFH

Pielhop, Thomas; Amgarten, Janick; von Rohr, Philipp Rudolf; Studer, Michael Hans-Peter (2016). Steam explosion pretreatment of softwood: the effect of the explosive decompression on enzymatic digestibility Biotechnology for Biofuels, 9(1) BioMed Central 10.1186/s13068-016-0567-1

Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305

Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004

Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001

R

Rehm, Klaus (2018). Verfahren zur Pulverbeschichtung In: Hänsel, Andreas; Prieto, Jorge (eds.) Industrielle Beschichtung von Holz und Holzwerkstoffen im Möbelbau (pp. 264-271). München: Cark Hanser Verlag

Reidy, Beat; Menzi, H. (2007). Assessment of the ammonia abatement potential of different geographical regions and altitudinal zones based on a large-scale farm and manure management survey Biosystems Engineering, 97(4), pp. 520-531. Academic Press 10.1016/j.biosystemseng.2007.03.034

Reidy, Beat; Webb, J.; Misselbrook, T.H.; Menzi, H.; Luesink, H.H.; Hutchings, N.J.; Eurich-Menden, B.; Döhler, H.; Dämmgen, U. (2009). Comparison of models used for national agricultural ammonia emission inventories in Europe: Litter-based manure systems Atmospheric Environment, 43(9), pp. 1632-1640. Elsevier 10.1016/j.atmosenv.2008.12.015

Rist, Armin; Zmeeva, Natalia (June 2019). Sonne und Poren für saubere Luft spirit biel/bienne, 2019(2), pp. 28-29. Berner Fachhochschule BFH

Rozmysłowicz, Bartosz; Yeap, Jher Hau; Elkhaiary, Ahmed M. I.; Talebi Amiri, Masoud; Shahab, Robert; Questell-Santiago, Ydna M.; Xiros, Charilaos; Le Monnier, Benjamin P.; Studer, Michael Hans-Peter; Luterbacher, Jeremy S. (2019). Catalytic valorization of the acetate fraction of biomass to aromatics and its integration into the carboxylate platform Green Chemistry, 21(10), pp. 2801-2809. Royal Society of Chemistry 10.1039/c9gc00513g

S

Samuel, Reichel; Foston, Marcus; Jaing, Nan; Cao, Shilin; Allison, Lenong; Studer, Michael Hans-Peter; Wyman, Charles; Ragauskas, Arthur J. (2011). HSQC (heteronuclear single quantum coherence) 13C–1H correlation spectra of whole biomass in perdeuterated pyridinium chloride–DMSO system: An effective tool for evaluating pretreatment Fuel, 90(9), pp. 2836-2842. Elsevier 10.1016/j.fuel.2011.04.021

Sanahuja, Solange; Briesen, Heiko (2015). Dynamic Spectral Analysis of Jagged Mechanical Signatures of a Brittle Puffed Snack Journal of Texture Studies, 46(3), pp. 171-186. Wiley-Blackwell 10.1111/jtxs.12109

Sanahuja, Solange; Upadhyay, Rutuja; Briesen, Heiko; Chen, Jianshe (2017). Spectral analysis of the stick-slip phenomenon in “oral” tribological texture evaluation Journal of Texture Studies, 48(4), pp. 318-334. Wiley-Blackwell 10.1111/jtxs.12266

Scherrer, Nadim (2012). Raman analysis of 19th & 20th century synthetic organic colorants In: Infrared & Raman Users Group: Raman Spectroscopy Workshop. Philadelphia Museum of Art, USA. 27-28 September 2012.

Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries

Seidel, Christoph-Maximilian; Brethauer Studer, Simone; Gyenge, László; Rudolf von Rohr, Philipp; Studer, Michael Hans-Peter (2019). Two-stage steam explosion pretreatment of softwood with 2-naphthol as carbocation scavenger Biotechnology for Biofuels, 12(1), pp. 1-12. BioMed Central 10.1186/s13068-019-1373-3

Shahab, Robert L.; Brethauer Studer, Simone; Luterbacher, Jeremy S.; Studer, Michael Hans-Peter (2020). Engineering of ecological niches to create stable artificial consortia for complex biotransformations Current Opinion in Biotechnology, 62, pp. 129-136. Elsevier 10.1016/j.copbio.2019.09.008

Strautmann, Jean; Noël, Marion; Volkmer, Thomas (October 2013). Surface qualification of weathered wood In: Joint COST FP0904 & FP1006 International Proceeding of the Workshop on characterization of modified wood in relation to wood bonding and coating performance. Rogla, Slovenia. 16-18 Oct 2013.

T

Thömen, Heiko; Viemeister, D. (2015). Bestimmung der Klebstoffverteilung im industriellen Holzwerkstoffprozess In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.

V

Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15.

Volkmer, Thomas (2018). Funktionaler Oberflächenschutz von Holzfassaden In: 24. Internationales Holzbau-Forum IHF. Garmisch-Partenkirchen, Germany. 05-07.12.2018.

Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019

Volkmer, Thomas; Gyr, R.; Kaiser, P. (2017). Methoden der Holzmodifikation zur Verbesserung der Dauerhaftigkeit und des Brandschutzes In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient, geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.

Volkmer, Thomas; Lehmann, Martin; Clerc, Gaspard (2017). Brettschichtholz aus Buche: Keilzinkenverbindung und Flächenverklebung In: 23. Internationales Holzbau-Forum. Garmisch-Partenkirchen, Deutschland. 06.-08.12.2017.

Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.

Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12.

W

Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD

Wenger, Alexander; Schmidt, Remo S.; Portmann, Reto; Roetschi, Alexandra; Eugster, Elisabeth; Weisskopf, Laure; Irmler, Stefan (2020). Identification of a species-specific aminotransferase in Pediococcus acidilactici capable of forming α-aminobutyrate AMB Express, 10(1) Springer 10.1186/s13568-020-01034-2

Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757

Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society

Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644

Y

Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.

This list was generated on Tue Aug 11 03:31:12 2020 CEST.
Provide Feedback