Items where Subject is "Q Science > Q Science (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | F | G | H | J | K | L | M | N | O | P | Q | R | S | T | V | W | Z
Number of items at this level: 182.

A

Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641

Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5

Albaba, Adel; Lambert, Stéphane; Faug, Thierry (2018). Dry granular avalanche impact force on a rigid wall: Analytic shock solution versus discrete element simulations Physical Review E, 97(5) APS 10.1103/PhysRevE.97.052903

Güntekin, Ergün; Aydın, Tuğba Yılmaz; Niemz, Peter (2015). Prediction of compression properties in three orthotropic directions for some important Turkish wood species using ultrasound BioResources, 10(4), pp. 7252-7262.

B

Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee

Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press

Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346

Bereuter, Lukas; Niederhauser, Thomas; Kucera, Martin; Loosli, Dominic; Steib, Immanuel; Schildknecht, Marcel; Zurbuchen, Adrian; Noti, Fabian; Tanner, Hildegard; Reichlin, Tobias; Haeberlin, Andreas (2019). Leadless cardiac resynchronization therapy: An in vivo proof-of-concept study of wireless pacemaker synchronization Heart Rhythm, 16(6), pp. 936-942. Elsevier http://dx.doi.org/10.1016/j.hrthm.2019.01.010

Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21.

Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105

Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279

Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001

Brethauer Studer, Simone; Studer, Michael Hans-Peter; Yang, Bin; Wyman, Charles E. (2011). The effect of bovine serum albumin on batch and continuous enzymatic cellulose hydrolysis mixed by stirring or shaking Bioresource Technology, 102(10), pp. 6295-6298. Elsevier 10.1016/j.biortech.2011.02.016

Brunner, Maurice Yaw; Donzé, Marc (2008). GLULAM REBORN : A flexible adhesive interface to increase the bending resistance of glulam Applied Sciences, p. 2008.

Brunner, Maurice Yaw (2006). On the increasing importance of tensile loading perpendicular to the grain in some new timber products In: World Conference on Timber Engineering. Portland, USA. 06.-10.08.2006.

Lehmann, Martin; Brunner, Maurice Yaw; Kraft, Sebastian (2010). Higher load bearing capabilities with elastic glue lines for glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.

Brunner, Maurice Yaw; Schnueriger, M. (2004). Strengthening of timber beams with prestressed artificial fibers: development of a suitable adhesive technology In: International Symposium on Advanced Timber and Timber-composites Elements for Building (pp. 45-50). San Michele all'Andige, Italy: CNR-Ivalsa

Brunner, Maurice Yaw; Schnueriger, M.; Lehmann, Martin (2008). Strengthening glulam beams with prestressed multilayer FRP carbon laminates In: Final Conference COST E34 Bonding of Timber (2008). Sopron, Hungary. 06.-07.05.2008.

Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari

Bäschlin, Nathalie; Läuchli, Matthias; Fankhauser, Thomas; Palmbach, Cornelius; Hoess, Anita (November 2011). Backing boards and glazing on paintings: Their damping capacity in relation to shock impact and vibration In: ICOM-CC 16th Triennial Conference. Lisbon, Portugal. 19. - 23.9.2011.

Bäschlin, Nathalie; Läuchli, Matthias; Palmbach, Cornelius; Hoess, Anita; Ryser, Marcel; Fankhauser, Thomas; Sautter, Katharina (2015). Der Teufel steckt im Detail – Zur Praxisanwendung der Forschungsergebnisse Transport fragiler Gemälde Zeitschrift für Kunsttechnologie und Konservierung, 29(2), pp. 211-222.

C

Canoine, Benoît (2019). Le bois densifié, un bois «exotique» local spirit biel/bienne, 2, p. 23.

Cao, Shilin; Pu, Yunqiao; Studer, Michael Hans-Peter; Wyman, Charles; Ragauskas, Arthur J. (2012). Chemical transformations of Populus trichocarpa during dilute acid pretreatment RSC Advances, 2(29), p. 10925. Royal Society of Chemistry 10.1039/c2ra22045h

Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008

Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung

Zürcher, Ernst; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH

D

DeMartini, Jaclyn D.; Studer, Michael Hans-Peter; Wyman, Charles E. (2010). Small-scale and automatable high-throughput compositional analysis of biomass Biotechnology and Bioengineering, 108(2), pp. 306-312. John Wiley & Sons 10.1002/bit.22937

Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020

Denecke, Kerstin (2020). Biomedical Standards and Open Health Data In: Reference Module in Biomedical Sciences (pp. 521-531). Elsevier 10.1016/b978-0-12-801238-3.11527-2

F

Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.

Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735

Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013

G

Ganne-Chédeville, Christelle (2019). Observer et imiter la nature spirit biel/bienne, 2, p. 19.

Ganne-Chédeville, Christelle (2008). Wood welding by linear friction: investigations and understanding of the physical and chemical modifications and development of an innovative technology. (Dissertation, Université Henri Poincaré - Nancy I)

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939

Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).

Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148

Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6

Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).

Ganne-Chédeville, Christelle; Pichelin, Frédéric (2007). Holzschweißen : Holz verbinden, schnell und ohne Leim Holz-Zentralblatt(40), pp. 1109-1110.

Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.

Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037

Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392

Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9

Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.

Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068

Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.

Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard (2010). Nachhaltige Reinigung von unbehandelten Holzfassaden – Ergebnisse aus laufenden Forschungsprojekten In: 42. SAH Fortbildungskurs. SAH

Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002

Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.

Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648

Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419

Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007

Thömen, Heiko; Gonin, Marc-André (2010). European master programs in wood science and technology In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-7). United Nations Economic Commission for Europe – Timber Committee

Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035

H

Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.

Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1

Hengl, Tomislav; Nussbaum, Madlene; Wright, Marvin N.; Heuvelink, Gerard B.M.; Gräler, Benedikt (2018). Random forest as a generic framework for predictive modeling of spatial and spatio-temporal variables PeerJ, 6, e5518. 10.7717/peerj.5518

Henne, Paul D.; Bigalke, Moritz; Büntgen, Ulf; Colombaroli, Daniele; Conedera, Marco; Feller, Urs; Frank, David; Fuhrer, Jürg; Grosjean, Martin; Heiri, Oliver; Luterbacher, Jürg; Mestrot, Adrien; Rigling, Andreas; Rössler, Ole; Rohr, Christian; Rutishauser, This; Schwikowski, Margit; Stampfli, Andreas; Szidat, Sönke; Theurillat, Jean-Paul; ... (2018). An empirical perspective for understanding climate change impacts in Switzerland Regional Environmental Change, 18(1), pp. 205-221. Springer 10.1007/s10113-017-1182-9

Mayer, Ingo; Hinterleitner, Christina (2018). Décontaminer les biens culturels spirit biel/bienne, 1, pp. 18-19.

Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.

Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.

Hurst, Andreas (2008). Holzhausbau in anderen Klimaregionen In: 40. Fortbildungskurs der Schweizerische Arbeitsgemeinschaft für Holzforschung (pp. 255-264). Zürich: SAH

Häni, Christoph; Flechard, Christophe; Neftel, Albrecht; Sintermann, Jörg; Kupper, Thomas (2018). Accounting for Field-Scale Dry Deposition in Backward Lagrangian Stochastic Dispersion Modelling of NH3 Emissions Atmosphere, 9(4), p. 146. MDPI 10.3390/atmos9040146

Höckel, Michael (2019). Brennstoffzellen für mobile Anwendungen Aqua&Gas, 99(7/8), pp. 31-36. SVGW

Höckel, Michael; Meyer, Jan (2019). Flächendeckende Netzimpedanzmessungen in der Schweiz Bulletin.ch |b Fachzeitschrift und Verbandsinformationen von electrosuisse und VSE = revue spécialisée et informations des associations electrosuisse et AES(5), pp. 56-60. SEV/VSE

Hümbelin, Oliver (2019). Software Options for Data Visualization In: Science Communication Series 2019. Bern: Berner Fachhochschule BFH, Soziale Arbeit

J

Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839

K

Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444

Kolb, Hanspeter; Volkmer, Thomas (2019). Pour du bois résistant mieux au feu et à la lumière spirit biel/bienne, 2, pp. 8-9.

Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002

Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag

Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003

Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST

L

Lamon, Inès; Herholz, Cornelia; Erb, Svetlana (13 July 2020). Le cheval de rente est-il amené à disparaître de Suisse? Bulletin – Pferdesport und Pferdezucht(07), pp. 28-34. Schweizerischer Verband für Pferdesport

Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2

Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310

Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8

Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.

Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759

Richter, Klaus; Lehmann, Martin; Properzi, Milena (2004). Long-term behaviour of pre-stressed timber-CFRP composites In: Enhancing bondline performance : proceedings of the final conference in COSTE 34 "Bonding of timber" (pp. 80-88). Lövér-Print Nyomdaipari

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2010). Reinigung von unbehandelten Holzfassaden Holzbaumarktschweiz : Fachmagazin für Holzbau, Architektur, Innenausbau, Produktion, 5, pp. 12-14.

Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001

Läuchli, Matthias; Bäschlin, Nathalie; Hoess, Anita; Fankhauser, Thomas; Palmbach, Cornelius; Ryser, Marcel (2014). Packing systems for paintings: Damping capacity in relation to transport-induced shock and vibration In: ICOM-CC 17th Triennial Conference. Melbourne, Australia. 15.-17.9.2014.

Läuchli, Matthias; Bäschlin, Nathalie; Palmbach, Cornelius; Fankhauser, Thomas; Ryser, Marcel; Sautter, Katharina (2017). Strategy of measurement and data analysis for monitoring during the transportation of paintings (Unpublished). In: Eastern Analytical Symposium (EAS). Plainsboro Township, NJ. 13. - 15.11.2017.

Läuchli, Matthias; Bäschlin, Nathalie; Palmbach, Cornelius; Ryser, Marcel; Fankhauser, Thomas; Hoess, Anita (2015). Vibrationen – kleine Erschütterungen millionenfach Zeitschrift für Kunsttechnologie und Konservierung, 29(2), pp. 223-236.

M

Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088

Markantonatou, Stella; Donig, Simon; Pavlidis, George; Gees, Thomas; Koumpis, Adamantios (2020). Ten Challenges for Digital Humanities and the Way Forward: Revisited From the Social Context In: Applying Innovative Technologies in Heritage Science. IGI Global 10.4018/978-1-7998-2871-6

Mayer, Ingo (2019). VOC-Emissionen aus mehrschichtigen Wand- und Deckenelementen in Holz-Rahmenbauweise HolzBauSpezial Bauphysik & Gebäudetechnik, 10, pp. 421-431. Forum Holzbau

Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27.

Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).

Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.

Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21.

Mayer, Ingo; Selbmann, Karl-Heinz (2019). 3D drucken mit Holz Spirit biel/bienne, 1, p. 16.

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Monteverde, Settimio; Bischofberger, Iren (2020). Forschung, Pflege und Ethik. In: Monteverde, Settimio (ed.) Handbuch Pflegeethik: ethisch denken und handeln in den Praxisfeldern der Pflege (pp. 176-194). Stuttgart: Kohlhammer

Moos, Christine; Thomas, Mélanie; Pauli, Bernhard; Bergkamp, Ger; Stoffel, Markus; Dorren, Luuk (2019). Economic valuation of ecosystem-based rockfall risk reduction considering disturbances and comparison to structural measures Science of The Total Environment, 697, p. 134077. Elsevier 10.1016/j.scitotenv.2019.134077

N

Navi, Parviz; Pichelin, Frédéric (2008). Difficulties of the modelling of wood forming processes In: Dresdner Werkzeugmaschinen-Fachseminar (2008). Dresden, Germany. 11.-12.12.2008.

Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.

Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH

Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press

Niemz, Peter; Sonderegger, Walter (2017). Holzphysik München, Deutschland: Carl Hanser Verlag GmbH & Co. KG 10.3139/9783446445468

Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034

Näher, Thomas; Thömen, Heiko; Burgert, Ingo (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft Zürich: Swiss Wood Innovation Network S-Win

O

Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1

P

Palmbach, Cornelius; Becker, Thomas (April 2017). Aktive Thermografie - Visualisierung von Schäden und verborgenen Strukturen an Malschichten und anderen beschichteten Oberflächen (Unpublished). In: 5. Workshop „Zerstörungsfreie Prüf- und Analysemethoden in der Restaurierung und Oberflächentechnik“ des Forums Inn-O-Kultur. Deutschen Historischen Museum, Berlin. 26.04.2017.

Palmbach, Cornelius; Bäschlin, Nathalie; Läuchli, Matthias; Fankhauser, Thomas; Hoess, Anita (2013). Transportmonitoring bei Gemäldetransporten – Neue Datensammlung zur Charakterisierung der Schock- und Vibrationsimmissionen In: 23. Tagung des Österreichischen Restauratorenverbandes 2012. Konservieren, Restaurieren: Vol. 14 (pp. 30-41). Wien: Österreichischer Restauratorenverband

Properzi, Milena; Pattis, Reto; Pichelin, Frédéric (2008). Wood ash as a resource for the production of innovative composite materials In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 2.-5.06.2008.

Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832

Pichelin, Frédéric (2016). «Cocoboard» panneaux biosourcés à base de fibres de coco spirit biel/bienne, 2, p. 22. BFH

Ammann AG (2004). Connecting element (EP 1 437 040 A1)

JP (2006). Unfolding anchor (JP2006153277 (A))

Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305

Placencia, Maria Inés; Pizzi, Antonio; Pichelin, Frédéric (June 2011). Linear friction welding for wood, a parameters study for up-scaled assemblies In: CIMAD 11 – 1º Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal. 7-9 Jun 2011.

Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA

Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services

Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004

Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001

Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric (2008). Strengthening of timber structures using pre-stressed carbon fibre lamellas In: MEDACHS Conference (2008). Lisbon, Portugal. 20.-23.01.2008.

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0

Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.

Q

Zürcher, Ernst; Quartey, G.A (2008). Durability investigations of lesser-known Ghanaian wood species In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.

R

Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.

Reidy, Beat; Dämmgen, U.; Döhler, H.; Eurich-Menden, B.; van Evert, F.K.; Hutchings, N.J.; Luesink, H.H.; Menzi, H.; Misselbrook, T.H.; Monteny, G.-J.; Webb, J. (2008). Comparison of models used for national agricultural ammonia emission inventories in Europe: Liquid manure systems Atmospheric Environment, 42(14), pp. 3452-3464. Elsevier 10.1016/j.atmosenv.2007.04.009

Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.

Rivera-Romero, Octavio; Stathis, Konstantinidis; Denecke, Kerstin; Gabarrón, Elia; Petersen, Carolyn; Househ, Mowafa; Merolli, Mark; Mayer, Miguel Ángel (2020). Ethical Considerations for Participatory Health through Social Media: Healthcare Workforce and Policy Maker Perspectives Yearbook of Medical Informatics, 29(01), 071-076. Thieme 10.1055/s-0040-1701981

Zürcher, Ernst; Rogenmoser, C. (2008). Exploring biodiversity at the wood level – Timber identification and structure-properties relationships In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.

Zürcher, Ernst; Rogenmoser, Christian (2010). Considering reversible variations in wood properties : possible applications in the choice of the tree-felling date ? In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.

Zürcher, Ernst; Rogenmoser, Christian; Quartney, Gladys A. (November 2009). Wenig bekannte Holzarten Westafrikas Holzforschung Schweiz, 2, pp. 12-14. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH

S

Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004

Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072

Schaller, M.; Bachmann, Eduard; Pauli, Bernhard; Berli, C.; von Fehrn, H.; Müller, Alexandra; Markovic, Jelena (2015). Computertomographie für Rundholz: Blick ins Stamminnere Wald und Holz, 96(10), pp. 21-24. Waldwirtschaft Schweiz

Scherrer, Nadim; Zumbühl, Stefan; Ferreira, Ester S. B.; Cato, Eleanor (1 February 2018). Surfaces and interfaces in multilayered paint systems – analytical challenges in art conservation sciences In: Ernst, Karl-Heinz (ed.) 34th SAOG Meeting: Science of Surfaces, Interfaces and Nanostructures. HEIA Haute école d'ingénierie et d'architecture, Fribourg, Switzerland. 1 February 2018.

Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2

Zürcher, Ernst; Schlaepfer, R.; Giudici, F. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste

Schmid, Michael; Muri, Jonathan; Melidis, Damianos; Varadarajan, Adithi R.; Somerville, Vincent; Wicki, Adrian; Moser, Aline; Bourqui, Marc; Wenzel, Claudia; Eugster, Elisabeth; Frey, Juerg E.; Irmler, Stefan; Ahrens, Christian H. (2018). Comparative Genomics of Completely Sequenced Lactobacillus helveticus Genomes Provides Insights into Strain-Specific Genes and Resolves Metagenomics Data Down to the Strain Level Frontiers in Microbiology, 9(63), pp. 1-20. Frontiers Media 10.3389/fmicb.2018.00063

Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1

Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003

Schwarz-Platzer, Katharina; Wendeler, Corinna; Braendle, Rico; Stolz, Martin (2019). Experimental investigation of forces along anchors subjected to dynamic loading under tension and compression in field tests Canadian Geotechnical Journal, 57(5), pp. 770-782. 10.1139/cgj-2018-0144

Seidel, Christoph-M.; Pielhop, Thomas; Studer, Michael Hans-Peter; Rudolf von Rohr, Philipp (2017). The influence of the explosive decompression in steam-explosion pretreatment on the enzymatic digestibility of different biomasses Faraday Discussions, 202, pp. 269-280. Royal Society of Chemistry 10.1039/c7fd00066a

Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.

Stettler, Judith; Heer, Ines (2019). Schweizer Landwirtschaft: Anpassungsstrategien In: Nachhaltige Unternehmensführung (pp. 57-80). Wiesbaden: Springer Gabler 10.1007/978-3-658-22101-0_3

Studer, Michael Hans-Peter; Brethauer Studer, Simone; DeMartini, Jaclyn D; McKenzie, Heather L; Wyman, Charles E (2011). Co-hydrolysis of hydrothermal and dilute acid pretreated populus slurries to support development of a high-throughput pretreatment system Biotechnology for Biofuels, 4(1), p. 19. BioMed Central 10.1186/1754-6834-4-19

Studer, Michael Hans-Peter; DeMartini, J. D.; Davis, M. F.; Sykes, R. W.; Davison, B.; Keller, M.; Tuskan, G. A.; Wyman, C. E. (2011). Lignin content in natural Populus variants affects sugar release Proceedings of the National Academy of Sciences, 108(15), pp. 6300-6305. National Academy of Sciences 10.1073/pnas.1009252108

Studer, Michael Hans-Peter; DeMartini, Jaclyn D.; Brethauer Studer, Simone; McKenzie, Heather L.; Wyman, Charles E. (2010). Engineering of a high-throughput screening system to identify cellulosic biomass, pretreatments, and enzyme formulations that enhance sugar release Biotechnology and Bioengineering, 105(2), pp. 231-238. John Wiley & Sons 10.1002/bit.22527

Studer, Michael Hans-Peter; Rudolf von Rohr, Philipp (2007). Novel membrane bioreactor: Able to cope with fluctuating loads, poorly water soluble VOCs, and biomass accumulation Biotechnology and Bioengineering, 99(1), pp. 38-48. John Wiley & Sons 10.1002/bit.21532

T

Thömen, Heiko (2019). Rohstoffe effizienter einsetzen - das Modell dazu spirit biel/bienne, 1, pp. 14-15.

Thömen, Heiko (2017). Légèreté pour le mobilier spirit biel/bienne, 1, pp. 24-25.

Thömen, Heiko; Homerin, Benoît; Bernardy, Gregor; Steffen, Andreas (2019). Dichte von Holzwerkstoffen in Echtzeit vorhersagen Holz-Zentralblatt(21), pp. 446-447.

Thömen, Heiko; Job, Charles (2019). Hochflexible Beleuchtungslösungen in Möbeln spirit biel/bienne, 2, pp. 16-17.

Thömen, Heiko; Walther, Thomas (2010). Grundlegende Untersuchungen zur Herstellung und Struktur von Holzwerkstoffen [Textbook] . Biel/Bienne, Schweiz: Berner Fachhochschule Architektur, Holz und Bau

Trajano, Heather L.; DeMartini, Jaclyn D.; Studer, Michael Hans-Peter; Wyman, Charles E. (2013). Comparison of the Effectiveness of a Fluidized Sand Bath and a Steam Chamber for Reactor Heating Industrial & Engineering Chemistry Research, 52(13), pp. 4932-4938. American Chemical Society 10.1021/ie301869a

Tsiranidou, Elsa; Bernikola, Eirini; Tornari, Vivi; Fankhauser, Thomas; Läuchli, Matthias; Bäschlin, Nathalie; Palmbach, Cornelius (2013). Studying transportation effects on canvas paintings by full field digital holographic techniques In: LACONA IX - Lasers in the conservation of artworks. London. 7. - 10. Sept. 2011.

V

Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4

Voglmeier, Karl; Jocher, Markus; Häni, Christoph; Ammann, Christof (2018). Ammonia emission measurements of an intensively grazed pasture Biogeosciences, 15(14), pp. 4593-4608. Copernicus 10.5194/bg-15-4593-2018

Volkmer, Thomas (2007). Schimmelpilze auf beschichteten Holzfassaden: chemische und physikalische Einflussfaktoren (Dissertation, Albert-Ludwigs-Universität Freiburg)

Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15.

Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019

Volkmer, Thomas; Landmesser, H. (2007). Pilze auf Holzfassaden Berner Fachhochschule Architektur, Holz und Bau

Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.

van der Poel, Joep; Vaca Sanchez, Sara Andrea; Mentler, Axel; Keiblinger, Katharina; Suryatmojo, Hatma; Banyu Risang Hobo, Kristin; Situmorang, Lidia; Ngadisih, Ngadisih; Darmawanti, Rima; Rebernig, Reinhard; Zimmermann, Hermine; Gardi, Oliver; Norgrove, Lindsey (18 September 2019). Taking stock of carbon along a land-use gradient in the Highlands of Java, Indonesia In: Tropentag 2019: Filling gaps and removing traps for sustainable resources management. Kassel, Germany. September 18-20, 2019.

Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12.

W

Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4

Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD

Wenger, Alexander; Schmidt, Remo S.; Portmann, Reto; Roetschi, Alexandra; Eugster, Elisabeth; Weisskopf, Laure; Irmler, Stefan (2020). Identification of a species-specific aminotransferase in Pediococcus acidilactici capable of forming α-aminobutyrate AMB Express, 10(1) Springer 10.1186/s13568-020-01034-2

Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757

Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679

Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097

Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa

Herholz, Cornelia; Wägeli, Salome; Kopp, Christoph; Estermann, André (2020). Was kostet der Huf? In: 10. Leipziger Tierärztekongress: Tagungsband 2: Pferd: 11th International Conference on Equine Reproductive Medicine. Leipziger Blaue Hefte (pp. 112-114). Leipzig: Universität LeipzigVeterinärmedizinische Fakultät

Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644

Z

Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152

Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.

This list was generated on Sat Oct 31 03:31:37 2020 CET.
Provide Feedback