Department of Engineering and Information Technology > Institute for Applied Laser, Photonics and Surface Technologies

Bern University of Applied Sciences (4472)
- Department of Engineering and Information Technology (685)
  - Institute for Applied Laser, Photonics and Surface Technologies (159)

Group by: Date | Name | Item Type | Refereed | No Grouping

Number of items at this level: 898.

Abukawa, T.

Osterwalder, J.; Aebi, P.; Fasel, R.; Naumovic, D.; Schwaller, Patrick; Kreutz, T.; Schlapbach, L.; Abukawa, T.; Kono, S. (1995). Angle-scanned photoelectron diffraction Surface Science, 331-33, pp. 1002-1014. Elsevier 10.1016/0039-6028(95)00076-3

Adusumalli, Ramesh-Babu

Adusumalli, Ramesh-Babu; Mook, William M.; Passas, Raphael; Schwaller, Patrick; Michler, Johann (2010). Nanoindentation of single pulp fibre cell walls Journal of Materials Science, 45(10), pp. 2558-2563. Springer Science+Business Media B.V. 10.1007/s10853-010-4226-9

Aeberhard, M.

Schwaller, Patrick; Aeberhard, M.; Nelis, Thomas; Fischer, A.; Thapliyal, R.; Michler, J. (2006). Rapid depth profiling of lead zirconate titanate (PZT) thin films by pulsed glow-discharge optical emission spectroscopy Surface and Interface Analysis, 38(4), pp. 757-760. Wiley 10.1002/sia.2264

Schwaller, Patrick; Fischer, A.; Thapliyal, R.; Aeberhard, M.; Michler, J.; Hug, H.J. (2005). Single-target DC-pulsed deposition of lead zirconate titanate thin films: Investigation of the chemical and mechanical properties by glow-discharge optical emission spectroscopy and nanoindentation Surface and Coatings Technology, 200(5-6), pp. 1566-1571. Elsevier 10.1016/j.surfcoat.2005.08.036

Aebi, P.

Schwaller, Patrick; Greber, T.; Aebi, P.; Singer, J.M.; Berger, H.; Forró, L.; Osterwalder, J. (2000). Doping-dependent electronic structure of cuprates studied using angle-scanned photoemission The European Physical Journal B, 18(2), pp. 215-225. Springer 10.1007/s100510070051

Aebi, P.; Kreutz, T. J.; Osterwalder, J.; Fasel, R.; Schwaller, Patrick; Schlapbach, L. (1996). k -Space Mapping of Majority and Minority Bands on the Fermi Surface of Nickel below and above the Curie Temperature Physical Review Letters, 76(7), pp. 1150-1153. 10.1103/PhysRevLett.76.1150

Osterwalder, J.; Aebi, P.; Schwaller, Patrick; Schlapbach, L.; Shimoda, M.; Mochiku, T.; Kadowaki, K. (1995). Angle-resolved photoemission experiments on Bi2Sr2CaCu2O8+?(001) Applied Physics A Materials Science & Processing, 60(3), pp. 247-254. Springer 10.1007/BF01538399

Aebi, P.; Osterwalder, J.; Schwaller, Patrick; Berger, H.; Beeli, C.; Schlapbach, L. (1995). Complete Fermi surface mapping of Bi-cuprates Journal of Physics and Chemistry of Solids, 56(12), pp. 1845-1847. Elsevier 10.1016/0022-3697(95)00223-5

Schwaller, Patrick; Aebi, P.; Berger, H.; Beeli, C.; Osterwalder, J.; Schlapbach, L. (1995). Structure and Fermi Surface Mapping of a Modulation-Free Pb-Bi-Sr-Ca-Cu-O High- Temperature Superconductor Journal of Electron Spectroscopy and Related Phenomena, 76, pp. 127-132. Elsevier 10.1016/0368-2048(95)02415-8

Aebi, P.; Osterwalder, J.; Schwaller, P.; Schlapbach, L.; Shimoda, M.; Mochiku, T.; Kadowaki, K. (1994). Complete Fermi surface mapping of Bi2Sr2CaCu2O8+x(001) : Coexistence of short range antiferromagnetic correlations and metallicity in the same phase Physical Review Letters, 72(17), pp. 2757-2760. American Physical Society (APS) 10.1103/PhysRevLett.72.2757

Aebi, P.; Osterwalder, J.; Schwaller, Patrick; Schlapbach, L.; Shimoda, M.; Mochiku, T.; Kadowaki, K.; Berger, H.; Lévy, F. (1994). Complete Fermi surface mapping of Bi2Sr2Can−1CunO2n+4(001) with n=1,2 Physica C: Superconductivity, 235-24, pp. 949-950. Elsevier 10.1016/0921-4534(94)91699-3

Naumović, D.; Aebi, P.; Stuck, A.; Schwaller, Patrick; Osterwalder, J.; Schlapbach, L. (1994). Ag on Cu(001) and other noble-metal films studied by full-hemispherical photoelectron diffraction Surface Science, 307-30, pp. 483-489. 10.1016/0039-6028(94)90441-3

Schwaller, Patrick; Aebi, P.; Osterwalder, J.; Schlapbach, L.; Shimoda, M.; Mochiku, T.; Kadowaki, K. (1993). Local epitaxy of Ag on Bi2Sr2CaCu2O8+x(001) Physical Review B, 48(9), pp. 6732-6735. American Physical Society (APS) 10.1103/PhysRevB.48.6732

Aksöz, E. A.

Aksöz, E. A.; Luder, M. A.; Laubacher, M.; Riener, R.; Binder-Macleod, S. A.; Hunt, Kenneth James (2018). Stochastically-modulated inter-pulse intervals to increase the efficiency of functional electrical stimulation cycling Journal of Rehabilitation and Assistive Technologies Engineering, 5, p. 205566831876736. SAGE 10.1177/2055668318767364

Alander, Pasi

Bouillaguet, Serge; Schütt, Andrea; Alander, Pasi; Schwaller, Patrick; Buerki, Gerhard; Michler, Johann; Cattani-Lorente, Maria; Vallittu, Pekka K.; Krejci, Ivo (2005). Hydrothermal and mechanical stresses degrade fiber-matrix interfacial bond strength in dental fiber-reinforced composites Journal of Biomedical Materials Research Part B: Applied Biomaterials, 76B(1), pp. 98-105. Wiley-Blackwell - STM 10.1002/jbm.b.30349

Alexander, Duncan T. L.

El Sayed, Ali; Pilz, Sönke; Najafi, Hossein; Alexander, Duncan T. L.; Hochstrasser, Martin; Romano, Valerio (2018). Fabrication and Characteristics of Yb-Doped Silica Fibers Produced by the Sol-Gel Based Granulated Silica Method Fibers, 6(4), pp. 82-96. MDPI 10.3390/fib6040082

Ammann, A.

Oehler, A.E.H.; Ammann, A.; Benetti, M.; Wassermann, D.; Jäggi, Beat; Remund, Stefan Marco; Neuenschwander, Beat (2018). How a new random trigger-feature for ultrashort-pulsed lasers increases Throughput, quality and accuracy in micromachining applications In: 19th International Symposium on Laser Precision Microfabrication. Edinburgh / UK. 25.-28.06.2018.

Ammann, Hubert

Oehler, Andreas; Ammann, Hubert; Benetti, Marco; Wassermann, Dominique; Jaeggi, Beat; Remund, Stefan Marco; Neuenschwander, Beat (2017). New random trigger-feature for ultrashort-pulsed laser increases throughput, accuracy and quality in micromachining applications In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII (100910I). SPIE 10.1117/12.2252599

Antonin, Olivier

Latrasse, Louis; Radoiu, Marilena; Nelis, Thomas; Antonin, Olivier (2017). Self-matching plasma sources using 2.45 GHz solid-state generators: microwave design and operating performance Journal of Microwave Power and Electromagnetic Energy, 51(4), pp. 237-258. Taylor & Francis 10.1080/08327823.2017.1388338

Appert, Christoph

Cam, Peter; Neuenschwander, Beat; Schwaller, Patrick; Köhli, Benjamin; Lüscher, Beat; Senn, Florian; Kounga, Alain; Appert, Christoph (2015). A novel laser-based method for controlled crystallization in dental prosthesis materials In: SPIE BiOS: Lasers in Dentistry XXI. San Francisco, United States. 24.02.2015. 10.1117/12.2076567

Arutyunyan, N. R.

Neuenschwander, Beat; Jaeggi, Beat; Zavedeev, E.V.; Arutyunyan, N. R.; Pimenov, S. M. (2019). Heat accumulation effects in laser processing of diamond-like nanocomposite films with bursts of femtosecond pulses Journal of Applied Physics, 126(11), p. 115301. AIP publishing 10.1063/1.5121424

Arutyunyan, N.R.

Pimenov, S.M.; Zavedeev, E.V.; Arutyunyan, N.R.; Presniakov, M.Yu.; Zilova, O.S.; Shupegin, M.L.; Jaeggi, B; Neuenschwander, Beat (2019). Femtosecond-laser-ablation induced transformations in the structure and surface properties of diamond-like nanocomposite films Applied Surface Science, 509, p. 144907. Elsevier 10.1016/j.apsusc.2019.144907

Zavedeev, E.V.; Zilova, O.S.; Barinov, A.D.; Shupegin, M.L.; Arutyunyan, N.R.; Jäggi, B.; Neuenschwander, Beat; Pimenov, S.M. (2017). Femtosecond laser microstructuring of diamond-like nanocomposite films Diamond related Materials, 74, pp. 45-52. Elsevier 10.1016/j.diamond.2017.02.003

Pimenov, S.M.; Zavedeev, E.V.; Arutyunyan, N.R.; Zilova, O.S.; Shupegin, M.L.; Jäggi, B.; Neuenschwander, Beat (2017). Femtosecond-laser surface modification and micropatterning of diamond-like nanocomposite films to control friction on the micro and nanoscale. Journal of Applied Physics, 122(14), p. 145301. 10.1063/1.4998586

Arutyunyan, Natalia

Pimenov, Sergei; Zavedeev, Evgeny; Arutyunyan, Natalia; Zilova, Olga; Shupegin, Mikhail; Jaeggi, Beat; Neuenschwander, Beat (2017). Femtosecond-laser surface micropatterning of diamond-like nanocomposite coatings to improve friction on the microscale In: WLT-Conference on Lasers in Manufacturing. Munich / Germany. 26.-29.06 2017.

Bacher, C.

Bacher, C.; Scheuner, J.; Pilz, Sönke; El Sayed, Ali; Ryser, M.; Heidt, A.; Romano, Valerio (2017). Spectroscopy of a heated Yb-doped optical fiber with high aluminum content In: Proc. SPIE 10232, Micro-structured and Specialty Optical Fibres V, 102320J 10232 (102320J). SPIE 10.1117/12.2268872

Ryser, M.; Etissa, D.; Pilz, Sönke; Scheuner, J.; Bacher, C.; Najafi, H.; Feuerer, T.; Romano, Valerio (2016). Fabrication and application of graphene oxide doped optical fibers In: Photonics Europe 2016. Brussels / Belgium. 6.04.2016.

Bacher, Christoph

Bacher, Christoph; Heidt, Alexander; Romano, Valerio; Ryser, Manuel (2018). Self-injection linear polarization locking of a fiber laser In: Proc. SPIE 10512, Fiber Lasers XV: Technology and Systems, 105121L (26 February 2018) 10512 (p. 56). SPIE 10.1117/12.2290450

Balogh-Michels, Zoltán

Balogh-Michels, Zoltán; Faeht, Alexander; Kleiner, Simon; Margraf, Patrick; Dommann, Alex; Neels, Antonia (2018). In Situ XRD Experiments on the Growth of Expanded Austenite Using Different Process Gases Defect and Diffusion Forum, 383, pp. 142-146. 10.4028/www.scientific.net/DDF.383.142

Balogh-Michels, Zoltán; Faeht, Alexander; Kleiner, Simon; von Känel, Adrian; Rufer, Jean-Martin; Dommann, Alex; Margraf, Patrick; Tschopp, Gerhard; Neels, Antonia (2017). In-situ kinetics study on the growth of expanded austenite in AISI 316L stainless steels by XRD Journal of Aplied Physics, 122(25111), pp. 1-11. American Institute of Physics (AIP) 10.1063/1.4993189

Bandi, T.

Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc; Dommann, A.; Neels, A.; Bandi, T.; Hennig, Guido (2013). Factors controlling the incubation in the application of ps laser pulses on copper and iron surfaces In: SPIE LASE (86070D). SPIE 10.1117/12.2004136

Barcikowski, Stefan

Jaeggi, Beat; Remund, Stefan Marco; Streubel, Rene; Goekce, Bilal; Barcikowski, Stefan; Neuenschwander, Beat (2017). Laser micromachining of metals with ultra-short pulses: Factors limiting the scale-up process JLMN-Journal of Laser Micro/Nanoengineering, 12(3), pp. 267-273. 10.2961/jlmn.2017.03.0016

Jaeggi, Beat; Remund, Stefan Marco; Streubel, Rene; Goekce, Bilal; Barcikowski, Stefan; Neuenschwander, Beat (2017). Laser micromachining of metals with ultra-short pulses: Factors limiting the scale-up process In: 18t International Symposium on Laser Precision Microfabrication. Toyama / Japan. 05.-08.06.2017.

Barinov, A.D.

Beeli, C.

Bemaud, David

Burn, Andreas; Heger, Christian; Bucheler, Stephan; Bemaud, David; Ziltener, Roger; Krainer, Lukas; Spuehler, Gabriel; Romano, Valerio; Nishiwaki, Shiro (2016). High throughput P2 laser scribing of Cu(In,Ga)Se2 thin-film solar cells In: Proc. SPIE 9735. Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXI. 973504. SPIE Photonics West 2016 9735 (p. 973504). SPIE 10.1117/12.2212496

Benetti, M.

Benetti, Marco

Berger, H.

Berger, S.

Shin, Woojin; Han, S.; Feurer, T.; Ryser, M.; Raisin, P.; Romano, Valerio; Pilz, Sönke; El Sayed, A.; Najafi, H.; Berger, S.; Ouh, C.; Jung, C.H. (2016). New Fiber Fabrication Method Based on the Granulated Silica In: Advanced Photonics 2016 (IPR, NOMA, Sensors, Networks, SPPCom, SOF). Vancouver / Canada. 18–20.06.2016.

Berger, Stefan Karl

Pilz, Sönke; Najafi, Hossein; El Sayed, Ali; Boas, Jolien; Kummer, Dieter; Scheuner, Jonas; Etissa, D.; Raisin, Philippe; Berger, Stefan Karl; Romano, Valerio (2016). Progress in the fabrication of optical fibers by the sol-gel-based granulated silica method In: Proc. SPIE 9886. Micro-Structured and Specialty Optical Fibres IV. 988614. SPIE Photonics West 2016 9886 (p. 988614). SPIE 10.1117/12.2227569

Bielmann, Michael

Bielmann, Michael; Schwaller, Patrick; Ruffieux, Pascal; Gröning, Oliver; Schlapbach, Louis; Gröning, Pierangelo (2002). AgO investigated by photoelectron spectroscopy : Evidence for mixed valence Physical Review B, 65(23), pp. 1-9. American Physical Society 10.1103/PhysRevB.65.235431

Binder-Macleod, S. A.

Binetti, Simona

Binetti, Simona; Le Donne, Alessia; Rolfi, Andrea; Jäggi, Beat; Neuenschwander, Beat; Busto, Chiara; Frigeri, Cesare; Scorticati, Davide; Longoni, Luca; Pellegrino, Sergio (2016). Picosecond laser texturization of mc-silicon for photovoltaics: A comparison between 1064 nm, 532 nm and 355 nm radiation wavelengths Applied Surface Science, 371, pp. 196-202. Elsevier 10.1016/j.apsusc.2016.02.187

Birch, J.

Eklund, P.; Emmerlich, J.; Högberg, H.; Wilhelmsson, O.; Isberg, P.; Birch, J.; Persson, P. O. Å.; Jansson, U.; Hultman, L. (2005). Structural, electrical, and mechanical properties of nc-TiC∕a-SiC nanocomposite thin films Journal of Vacuum Science & Technology B, 23(6), p. 2486. American Vacuum Society (AVS) 10.1116/1.2131081

Blanc, M.

Schwaller, Patrick; Gröning, P.; Schneuwly, A.; Boschung, P.; Müller, E.; Blanc, M.; Schlapbach, L. (2000). Surface and friction characterization by thermoelectric measurements during ultrasonic friction processes Ultrasonics, 38(1-8), pp. 212-214. Elsevier 10.1016/S0041-624X(99)00062-1

Blank, E.

Stauss, S.; Schwaller, Patrick; Bucaille, J.-L.; Rabe, R.; Rohr, L.; Michler, J.; Blank, E. (2003). Determining the stress–strain behaviour of small devices by nanoindentation in combination with inverse methods Microelectronic Engineering, 67-68, pp. 818-825. Elsevier 10.1016/S0167-9317(03)00192-8

Boas, Jolien

Najafi, Hossein; Pilz, Sönke; El Sayed, A.; Boas, Jolien; Kummer, Dieter; Romano, Valerio (2016). Atomic-scale imaging of dopant atoms and clusters in Yb-doped optical fibers In: Proc. SPIE 9886. Micro-Structured and Specialty Optical Fibres IV. 98860Z. SPIE Photonics West 2016 9886 (98860Z). SPIE 10.1117/12.2230566

Boeckler, Ernst W.

Jaggi, Beat; Neuenschwander, Beat; Zimmermann, Markus; Zecherle, Markus; Boeckler, Ernst W. (2016). Time-optimized laser micro machining by using a new high dynamic and high precision galvo scanner Proc. SPIE, 9735, p. 973513. SPIE 10.1117/12.2210791

Bonderer, L.

Haug, F.-J.; Bonderer, L.; Schwaller, Patrick; Patscheider, J.; Tobler, M.; Karimi, A. (2005). Control of the nitrogen content in nanocomposite TiN/SiN coatings deposited by an arc-sputter hybrid process Composites Science and Technology, 65(5), pp. 799-803. Elsevier 10.1016/j.compscitech.2004.10.013

Boschung, P.

Bouillaguet, Serge

Breguet, J.-M.

Chudoba, Thomas; Schwaller, Patrick; Rabe, R.; Breguet, J.-M.; Michler, Johann (2006). Comparison of nanoindentation results obtained with Berkovich and cube-corner indenters Philosophical Magazine, 86(33-35), pp. 5265-5283. Taylor & Francis 10.1080/14786430600746424

Michler, J.; Rabe, R.; Bucaille, J.-L.; Moser, B.; Schwaller, Patrick; Breguet, J.-M. (2005). Investigation of wear mechanisms through in situ observation during microscratching inside the scanning electron microscope Wear, 259(1-6), pp. 18-26. Elsevier 10.1016/j.wear.2005.02.111

Rabe, R.; Breguet, J.-M.; Schwaller, Patrick; Stauss, S.; Haug, F.-J.; Patscheider, J.; Michler, J. (2004). Observation of fracture and plastic deformation during indentation and scratching inside the scanning electron microscope Thin Solid Films, 469-47, pp. 206-213. Elsevier Science 10.1016/j.tsf.2004.08.096

Bruening, Stephan

Hennig, Guido; Bruening, Stephan; Jäggi, Beat; Stirnimann, Adrian; Neuenschwander, Beat (2018). Beam delivery methods for highly efficient USP-laser micro structuring of large cylindrical surfaces for printing and embossing Proc. SPIE, 10519, p. 7. 10.1117/12.2290356

Bruneel, D.

Jaeggi, B.; Cangueiro, L.; Bruneel, D.; Ramos de Campos, J.A.; Hairaye, C.; Neuenschwander, Beat (2018). Micromachining using pulse bursts: Influence of the pulse duration and the number of pulses in the burst on the specific removal rate Proc. SPIE, 10519. https://doi.org/10.1117/12.2289549

Brüning, Stephan

Hennig, Guido; Resing, Markus; Mattheus, Stefan; Neuenschwander, Beat; Brüning, Stephan (2011). Laser Microstructuring and Processing in Printing Industry In: CLEO: Applications and Technology (AMD4). Washington, D.C.: OSA 10.1364/CLEO_AT.2011.AMD4

Bucaille, J.-L.

Bucaille, Jean-Luc

Bucaille, Jean-Luc; Stauss, Sven; Schwaller, Patrick; Michler, Johann (2004). A new technique to determine the elastoplastic properties of thin metallic films using sharp indenters Thin Solid Films, 447-44, pp. 239-245. Elsevier Science 10.1016/S0040-6090(03)01100-3

Bucheler, Stephan

Bucher, Guido

Zehnder, S.; Schwaller, Patrick; von Arx, U.; Bucher, Guido; Neuenschwander, Beat (2011). Micro structuring of transparent materials with NIR ns-laser pulses Physics Procedia, 12, pp. 195-200. Elsevier 10.1016/j.phpro.2011.03.122

Neuenschwander, Beat; Bucher, Guido; Hennig, Guido; Nussbaum, Christian; Joss, Benjamin; Muralt, Martin; Zehnder, Sarah; Hunziker, Urs; Schütz, Peter (26 September 2010). Processing of Dielectric Materials and Metals with ps Laserpulses In: ICALEO 2010 (pp. 707-715). AIP publishing 10.2351/1.5062103

Neuenschwander, Beat; Bucher, Guido; Nussbaum, Christian; Joss, Benjamin; Muralt, Martin; Hunziker, Urs; Schütz, Peter (2010). Processing of metals and dielectric materials with ps-laserpulses: results, strategies, limitations and needs In: SPIE LASE (75840R). SPIE 10.1117/12.846521

Buecheler, Stephan

Gečys, Paulius; Markauskas, Edgaras; Nishiwaki, Shiro; Buecheler, Stephan; De Loor, Ronny; Burn, Andreas; Romano, Valerio; Račiukaitis, Gediminas (2017). CIGS thin-film solar module processing: case of high-speed laser scribing Nature Scientific reports, 7(1) Springer 10.1038/srep40502

Nishiwaki, Shiro; Burn, Andreas; Buecheler, Stephan; Muralt, Martin; Pilz, Sönke; Romano, Valerio; Witte, Reiner; Krainer, Lukas; Spühler, Gabriel J.; Tiwari, Ayodhya N. (2015). A monolithically integrated high‐efficiency Cu(In,Ga)Se2 mini‐module structured solely by laser Progress in Photovoltaics: Research and Applications, 23(12), pp. 1908-1915. Wiley 10.1002/pip.2583

Buerki, Gerhard

Burn, Andreas

Kalentics, Nikola; Huang, Ke; Ortega Varela de Seijas, Manuel; Burn, Andreas; Romano, Valerio; Logé, Roland E. (2018). Laser shock peening. A promising tool for tailoring metallic microstructures in selective laser melting Journal of Materials Processing Technology, 266, pp. 612-618. Elsevier 10.1016/j.jmatprotec.2018.11.024

Busto, Chiara

Butkus, Simas

Hirsiger, Thomas; Gafner, Markus; Remund, Stefan M.; Chaja, Michalina W.; Urniezius, Aivaras; Butkus, Simas; Neuenschwander, Beat; Račiukaitis, Gediminas; Molpeceres, Carlos; Narazaki, Aiko; Qiao, Jie (2020). Machining metals and silicon with GHz bursts: Surprising tremendous reduction of the specific removal rate for surface texturing applications In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXV (p. 27). SPIE 10.1117/12.2543948

Bürki, G.

Philippe, L.; Schwaller, Patrick; Bürki, G.; Michler, J. (2008). A comparison of microtensile and microcompression methods for studying plastic properties of nanocrystalline electrodeposited nickel at different length scales Journal of Materials Research, 23(5), pp. 1383-1388. Cambridge University Press 10.1557/JMR.2008.0162

Cai, Xun

Hu, Yawei; Li, Liuhe; Cai, Xun; Chen, Qiulong; Chu, Paul K. (2007). Mechanical and tribological properties of TiC/amorphous hydrogenated carbon composite coatings fabricated by DC magnetron sputtering with and without sample bias Diamond related Materials, 16(1), pp. 181-186. Elsevier 10.1016/j.diamond.2006.05.010

Cam, Peter

Cam, Peter; Sivillica, Fabio; Hänni, Simon; Orlando, Fabrizio; Ohr, Steffen; Schoelkopf, Joachim; Schwaller, Patrick (27 June 2019). Cleaning surfaces from food residues with pulsed laser In: World of Photonics Congress 2019. München. 23. - 27. Juni 2019.

Schmid, Marc; Zehnder, S.; Cam, Peter; Schwaller, Patrick; Neuenschwander, Beat (2018). Temperature dependency of optical properties of metals: comparing ellipsometric data with theoretical models In: 19th International Symposium on Laser Precision Microfabrication. Edinburgh / UK. 25.-28.06.2018.

Cangueiro, L.

Castaldi, L.

Castaldi, L.; Kurapov, D.; Reiter, A.; Shklover, V.; Schwaller, Patrick; Patscheider, J. (2008). Effect of the oxygen content on the structure, morphology and oxidation resistance of Cr–O–N coatings Surface and Coatings Technology, 203(5-7), pp. 545-549. Elsevier 10.1016/j.surfcoat.2008.05.018

Castaldi, L.; Kurapov, D.; Reiter, A.; Shklover, V.; Schwaller, Patrick; Patscheider, J. (2007). High temperature phase changes and oxidation behavior of Cr–Si–N coatings Surface and Coatings Technology, 202(4-7), pp. 781-785. Elsevier 10.1016/j.surfcoat.2007.05.070

Cattani-Lorente, Maria

Chaja, Michalina

Kramer, Thorsten; Remund, Stefan Marco; Chaja, Michalina; Gafner, M.; Maehne, T.; Neuenschwander, Beat (2019). High Throughput and High Quality Surface Texturing with Ultrafast Lasers In: Laser Applications Conference (CW1C.5). Washington, D.C.: OSA 10.1364/LAC.2019.CW1C.5

Chaja, Michalina; Kramer, Thorsten; Neuenschwander, Beat (2018). Influence of laser spot size and shape on ablation efficiency using ultrashort pulse laser system Procedia CIRP, 74, pp. 300-304. 10.1016/j.procir.2018.08.119

Chaja, Michalina V.

Remund, Stefan M.; Chaja, Michalina V.; Zhang, Yiming; Neuenschwander, Beat (2019). Influence of pulse duration in the pico- and femtosecond regime on the absorptance and specific removal rate (Conference Presentation) In: Račiukaitis, Gediminas; Makimura, Tetsuya; Molpeceres, Carlos (eds.) Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV (p. 3). SPIE 10.1117/12.2511294

Chaja, Michalina W.

Chen, Qiulong

Chu, Paul K.

Chudoba, Thomas

De Loor, Ronny

Deichmann, W.

Greber, T.; Raetzo, O.; Kreutz, T. J.; Schwaller, Patrick; Deichmann, W.; Wetli, E.; Osterwalder, J. (1997). A photoelectron spectrometer for k-space mapping above the Fermi level Review of Scientific Instruments, 68(12), pp. 4549-4554. American Institute of Physics (AIP) 10.1063/1.1148429

Denkel, Christoph

Held, Michael; Schwaller, Patrick; Vaihinger, Markus; Denkel, Christoph (2017). Local Impedance Spectroscopy: A Potential Tool to Characterize the Evolution of Emulsions and Foams Journal of Food Science and Engineering, 7(5), pp. 249-261. David Publishing Co. 10.17265/2159-5828/2017.05.003

Diserens, M.

Patscheider, J.; Zehnder, T.; Matthey, J.; Diserens, M. (2004). Nanostructured Hard Coatings - From Nanocomposites to Nanomultilayers In: New Methodologies and Techniques for a Sustainable Organic Chemistry. NATO Science Series II: Mathematics, Physics and Chemistry: Vol. 246 (pp. 35-42). Springer 10.1007/1-4020-2222-0_4

Djenizian, T.

Santinacci, L.; Djenizian, T.; Schwaller, Patrick; Suter, T.; Etcheberry, A.; Schmuki, P. (2008). Selective electrochemical gold deposition onto p-Si (1 0 0) surfaces Journal of Physics D: Applied Physics, 41(17), p. 175301. Institute of Physics Publishing (IOP) 10.1088/0022-3727/41/17/175301

Dommann, A.

Dommann, Alex

Dury, Noémie

Kramer, Thorsten; Remund, Stefan Marco; Gafner, Markus; Zwygart, Daniel; Neuenschwander, Beat; Holtz, Ronald; Witte, Reiner; Dury, Noémie (2018). Novel Strategy for Ultrafast Pulsed Laser Micromachining of Rotational Symmetric Metallic Parts In: 10th Conference on Photonic Technologies - LANE 2018 74 (pp. 611-617). Elsevier 10.1016/j.procir.2018.08.076

Döbeli, Max

Simmen, Franziska; Lippert, Thomas; Novák, Petr M.; Neuenschwander, Beat; Döbeli, Max; Mallepell, Marc; Wokaun, Alexander (2009). Influence of the substrate material on the properties of pulsed laser deposited thin Li1+xMn2O4−δ films Applied Surface Science, 255(10), pp. 5303-5306. Elsevier 10.1016/j.apsusc.2008.08.016

Simmen, Franziska; Lippert, Thomas; Novák, Petr M.; Neuenschwander, Beat; Döbeli, Max; Mallepell, Marc; Wokaun, Alexander (2008). The influence of lithium excess in the target on the properties and compositions of Li1+x Mn2O4−δ thin films prepared by PLD Applied Physics A, 93(3), pp. 711-716. Springer 10.1007/s00339-008-4701-1

Ehrhardt, M.

Lorenz, Pierre; Kloppel, M.; Ehrhardt, M.; Zimmer, Klaus; Schwaller, Patrick (2015). Nanosecond laser-induced nanostructuring of thin metal layers and dielectric surfaces Proc. SPIE, 9351, 93511T. 10.1117/12.2079336

Ehrhardt, Martin

Lorenz, Pierre; Zehnder, Sarah; Ehrhardt, Martin; Frost, Frank; Zimmer, Klaus; Schwaller, Patrick (2014). Nanosecond laser-induced back side wet etching of fused silica with a copper-based absorber liquid Proc. SPIE, 8967. https://doi.org/10.1117/12.2037614

Zehnder, Sarah; Lorenz, Pierre; Ehrhardt, Martin; Zimmer, Klaus; Schwaller, Patrick (2014). Laser-induced processes on the back side of dielectric surfaces using a CuSO4-based absorber liquid Proc. SPIE, 8968, p. 896812. 10.1117/12.2037629

Eilzer, S.

Jaeggi, Beat; Neuenschwander, Beat; Remund, Stefan Marco; Eilzer, S.; Funck, M. C.; Wedel, B. (2017). Laser-micro-processing with ultrashort pulses using flexible beam delivery In: WLT-Conference on Lasers in Manufacturing. Munich / Germany. 26.-29.06 2017.

Eklund, P.

El Sayed, A.

El Sayed, A.; Pilz, Sönke; Ryser, Manuel; Romano, Valerio (2016). Two-dimensional refractive index profiling of optical fibers by modified refractive near-field technique In: Proc. SPIE 9744. Optical Components and Materials XIII. 97440N. SPIE Photonics West 2016 (98861N). SPIE 10.1117/12.2229618

El Sayed, A.; Pilz, Sönke; Ryser, Manuel; Romano, Valerio (2016). Two-dimensional refractive index profiling of optical fibers by modified refractive near-field technique In: Proc. SPIE 9886. Micro-Structured and Specialty Optical Fibres IV. 98861N. SPIE Photonics West 2016 9886 (97440N). SPIE 10.1117/12.2211002

El Sayed, Ali

El Sayed, Ali; Pilz, Sönke; Scheuner, Jonas; Najafi, Hossein; Feurer, Thomas; Romano, Valerio (2018). Properties of Yb doped silica fibers with different Al and P co-dopants concentrations produced by the Sol-Gel based granulated silica method In: Proc. SPIE 10681 10681 (p. 49). SPIE 10.1117/12.2323493

Scheuner, Jonas; Heidt, Alexander M.; Pilz, Sönke; Raisin, Philippe; El Sayed, Ali; Najafi, Hossein; Ryser, Manuel; Feurer, Thomas; Romano, Valerio (2017). Advances in optical fibers fabricated with granulated silica In: Optical Fiber Communication Conference 2017. Los Angeles / USA. 19.-23.03.2017.

Emmerlich, J.

Etcheberry, A.

Etissa, D.

Faeht, Alexander

Fasel, R.

Feuerer, T.

Feurer, T.

Feurer, Thomas

Fischer, A.

Foerster, Daniel J.

Jaeggi, Beat; Foerster, Daniel J.; Weber, Rudolf; Neuenschwander, Beat (2018). Residual heat during laser ablation of metals with bursts of ultra-short pulses Advanced Optical Technologies, 7(3), pp. 175-182. 10.1515/aot-2018-0003

Neuenschwander, Beat; Jaeggi, Beat; Foerster, Daniel J.; Kramer, Thorsten (2018). Influence of the Burst Mode onto the Specific Removal Rate for Metals and Semiconductors Journal of Laser Applications, 31(2), 022203. 10.2351/1.5096083

Neuenschwander, Beat; Jaeggi, Beat; Foerster, Daniel J.; Kramer, Thorsten; Remund, Stefan Marco (2018). Influence of the Burst Mode onto the Specific Removal Rate for Metals and Semiconductors Journal of Laser Applications, 31(2), 022203. 10.2351/1.5096083

Forró, L.

Frigeri, Cesare

Frost, Frank

Funck, M. C.

Funnemann, D.

Ruffieux, P.; Schwaller, Patrick; Gröning, O.; Schlapbach, L.; Gröning, P.; Herd, Q. C.; Funnemann, D.; Westermann, J. (2000). Experimental determination of the transmission factor for the Omicron EA125 electron analyzer Review of Scientific Instruments, 71(10), p. 3634. 10.1063/1.1313798

Gafner, M.

Gafner, Markus

Gafner, Markus; Remund, Stefan Marco; Neuenschwander, Beat; Mähne, Torsten (2018). Optimized Strategies for Galvo Scanning in Fully Synchronized Mode Leading to Massive Improvement in Maching Time In: 37th International Congress on Applications of Lasers & Electro Optics ICALEO. Orlando, Florida / USA. 14.-18.10.2018.

Gamez, Gerardo

Usala, John D.; Maag, Adrian; Nelis, Thomas; Gamez, Gerardo (2016). Compressed sensing spectral imaging for plasma optical emission spectroscopy Journal of Analytical Atomic Spectrometry, 11(31), pp. 2198-2206. Royal Society of Chemistry 10.1039/C6JA00261G

Gassner, G.

Gassner, G.; Patscheider, J.; Mayrhofer, P. H.; Hegedus, E.; Tóth, L.; Kovacs, I.; Pécz, B.; Srot, V.; Scheu, Ch.; Mitterer, C. (2006). Structure of sputtered nanocomposite CrC[sub x]∕a-C:H thin films Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 24(4), p. 1837. 10.1116/1.2216713

Gečys, Paulius

Ghisleni, Rudy

Ghisleni, Rudy; Rzepiejewska-Malyska, Karolin; Laetitia, Philippe; Schwaller, Patrick; Michler, Johann (2009). In situ SEM indentation experiments: Instruments, methodology, and applications Microscopy Research and Technique, 72(3), pp. 242-249. Wiley-Blackwell - STM 10.1002/jemt.20677

Goekce, Bilal

Jaeggi, Beat; Remund, Stefan Marco; Streubel, Rene; Goekce, Bilal; Barcikowski, Stefan; Neuenschwander, Beat (2017). Laser micromachining of metals with ultra-short pulses: Factors limiting the scale-up process In: 18t International Symposium on Laser Precision Microfabrication. Toyama / Japan. 05.-08.06.2017.

Grad, Lisa

Kramer, Torsten; Zhang, Yiming; Jaeggi, Beat; Michalowski, Andreas; Grad, Lisa; Neuenschwander, Beat (2017). Increasing the Specific Removal Rate for Ultra Sdhort Pulsed Laser-Micromachining by Using Pulse Bursts JLMN-Journal of Laser Micro/Nanoengineering, 12(2), pp. 107-114. 10.2961/jlmn.2017.02.0011

Kramer, Thorsten; Zhang, Yiming; Remund, Stefan Marco; Michalowski, Andreas; Grad, Lisa; Neuenschwander, Beat; Jäggi, Beat (2015). Increasing the Specific Removal Rate for Ultra Short Pulsed Laser-Micromachining by Using Pulse Bursts Journal of Laser Micro/Nanoengineering, 12(2), pp. 107-114. Osaka: Japan Laser Processing Society 10.2961/jlmn.2017.02.0011

Greber, T.

Wider, J.; Greber, T.; Wetli, E.; Kreutz, T.J.; Schwaller, Patrick; Osterwalder, J. (1998). Direct observation of subsurface oxygen on Rh(111) Surface Science, 417(2-3), pp. 301-310. Elsevier 10.1016/S0039-6028(98)00674-8

Gröning, O.

Gröning, P.

Gröning, Oliver

Ruffieux, Pascal; Gröning, Oliver; Schwaller, Patrick; Schlapbach, Louis; Gröning, Pierangelo (2000). Hydrogen Atoms Cause Long-Range Electronic Effects on Graphite Physical Review Letters, 84(21), pp. 4910-4913. American Physical Society (APS) 10.1103/PhysRevLett.84.4910

Gröning, P.

Gröning, Pierangelo

Hairaye, C.

Han, S.

Haug, F.-J.

Haug, F.-J.; Schwaller, Patrick; Wloka, J.; Patscheider, J.; Karimi, A.; Tobler, M. (2004). Stoichiometry dependence of hardness, elastic properties, and oxidation resistance in TiN/SiNx nanocomposites deposited by a hybrid process Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 22(4), pp. 1229-1234. American Vacuum Society (AVS) 10.1116/1.1763907

Haug, Franz-Josef

Schwaller, Patrick; Haug, Franz-Josef; Michler, Johann; Patscheider, Jörg (2005). Nanocomposite Hard Coatings: Deposition Issues and Validation of their Mechanical Properties Advanced Engineering Materials, 7(5), pp. 318-322. Wiley-Blackwell - STM 10.1002/adem.200500045

Hegedus, E.

Heger, Christian

Heidt, A.

Heidt, Alexander

Heidt, Alexander M.

Held, Michael

Hennig, G.

Jaeggi, Beat; Neuenschwander, Beat; Meier, T.; Zimmermann, M.; Hennig, G. (2013). High Precision Surface Structuring with Ultra-Short Laser Pulses and Synchronized Mechanical Axes Physics Procedia, 41, pp. 319-326. Elsevier 10.1016/j.phpro.2013.03.084

Jaeggi, Beat; Neuenschwander, Beat; Hunziker, Urs; Zuercher, Joseph; Meier, Thomas; Zimmermann, Markus; Hennig, G. (2012). High precision and high throughput surface structuring by synchronizing mechanical axes with an ultra short pulsed laser system in MOPA arrangement In: ICALEO® 2012: 31st International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing (pp. 1046-1053). Laser Institute of America 10.2351/1.5062381

Hennig, Guido

Neuenschwander, Beat; Jäggi, Beat; Zimmermann, Markus; Hennig, Guido (2014). Influence of Particle Shielding and Heat Accumulation Effects onto the Removal Rate for Laser Micromachining with Ultra-Short Pulses at High Repetition Rates. In: 33rd International Congress on Applications of Lasers & Electro-Optic. San Diego. 19.10.2014 - 23.10.2014. 10.2351/1.5063063

Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc; Hennig, Guido (2014). Surface structuring with ulztra-short laser pulses: Basics limitations and needs for high throughput Physics Procedia, 56, pp. 1047-1058. ScienceDirect 10.1016/j.phpro.2014.08.017

Jaeggi, Beat; Neuenschwander, Beat; Meier, Thomas; Zimmermann, Markus; Hennig, Guido (2013). High throughput laser micro machining on a rotating cylinder with ultra short pulses at highest precision In: SPIE LASE (86070E). SPIE 10.1117/12.2004099

Jaeggi, Beat; Neuenschwander, Beat; Hunziker, Urs; Zuercher, Joseph; Meier, Thomas; Zimmermann, Markus; Selbmann, Karl-Heinz; Hennig, Guido (2012). Ultra-high-precision surface structuring by synchronizing a galvo scanner with an ultra-short-pulsed laser system in MOPA arrangement In: SPIE LASE. San Francisco, California, USA. 15.02.2012. 10.1117/12.909844

Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc; Rouffiange, Vincent; Martin, Paul-E.; Hennig, Guido (2012). Optimization of the volume ablation rate for metals at different laser pulse-durations from ps to fs In: SPIE LASE. San Francisco, California, USA. 15.02.2012. 10.1117/12.908583

Schmid, Marc; Neuenschwander, Beat; Romano, Valerio; Hennig, Guido; Jaeggi, Beat; Hunziker, Urs (2011). Processing of metals with ps-laser pulses in the range between 10ps and 100ps In: SPIE LASE (p. 792009). SPIE 10.1117/12.879498

Herd, Q. C.

Hirsiger, Thomas

Hochstrasser, Martin

Holtz, Ronald

Högberg, H.

Hu, Yawei

Huang, Ke

Hug, H.J.

Hultman, L.

Hunt, Kenneth James

Hunziker, Urs

Kramer, Thorsten; Neuenschwander, Beat; Jäggi, Beat; Remund, Stefan Marco; Hunziker, Urs; Zürcher, Josef (2016). Influence of Pulse Bursts on the Specific Removal Rate for Ultra-Fast Pulsed laser Micromachining of Copper. In: 9th Conference on Photonic Technologies - LANE 2016. Fuerth, Germany. 19.-22.9.2016. 10.1016/j.phpro.2016.08.024

Schmid, Marc; Zehnder, Sarah; Schwaller, Patrick; Neuenschwander, Beat; Zürcher, Joseph; Hunziker, Urs (2013). Measuring the complex refractive index of metals in the solid and liquid state and its influence on the laser machining Proc. SPIE, 86071I. SPIE 10.1117/12.2003744

Jaeggi, Beat; Neuenschwander, Beat; Schmid, Marc; Muralt, Martin; Zuercher, Joseph C.; Hunziker, Urs (2011). Influence of the Pulse Duration in the ps-Regime on the Ablation Efficiency of Metals Physics Procedia, 12, pp. 164-171. Elsevier 10.1016/j.phpro.2011.03.118

Hänni, Simon

Isberg, P.

Jaeggi, B

Jaeggi, B.

Jaeggi, Beat

Jaeggi, Beat; Neuenschwander, Beat; Kramer, Thorsten; Remund, Stefan Marco (2017). Influence of the pulse duration and the experimental approach onto the specific removal rate for ultra-short-pulses In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII 10091. Bellingham: Society of Photo-Optical Instrumentation Engineers (SPIE)

Jaeggi, Beat; Remund, Stefan Marco; Streubel, Rene; Goekce, Bilal; Barcikowski, Stefan; Neuenschwander, Beat (2017). Laser micromachining of metals with ultra-short pulses: Factors limiting the scale-up process In: 18t International Symposium on Laser Precision Microfabrication. Toyama / Japan. 05.-08.06.2017.

Neuenschwander, Beat; Jaeggi, Beat; Zimmermann, Markus; Markovic, Vesna; Resan, Bojan; Weingarten, Kurt; de Loor, Ronny; Penning, Lars (2016). Laser surface structuring with 100W of average power and sub-ps pulses Journal of Laser Applications, 28(2), 022506. Laser Institute of America (LIA) 10.2351/1.4944104

Neuenschwander, Beat; Jaeggi, Beat; Kramer, Thorsten (2016). Influence of the initial Surface Finish of the Ample onto the Machining Quality for Ultra Short Laser Pulses Journal of Laser Applications, M301. 10.2351/1.5118608

Neuenschwander, Beat; Jaeggi, Beat; Romano, Valerio; Pimenov, Sergei (2014). Picosecond-laser bulk modification, luminescence and Raman lasing in single-crystal diamond In: Proc. SPIE 8967, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XIX, 89670B. San Francisco / USA. 1.-6.2.2014. 10.1117/12.2040545

Jaeggi, Beat; Neuenschwander, Beat; Zimmermann, Markus; de Loor, R.; Penning, L. (2014). High throughput ps-laser micro machining with a synchronized polygon line scanner In: LANE 2014 8th International Conference on Photonic Technologies. Fürth / Germany. 8.-11.9.2014.

Jaeggi, Beat; Neuenschwander, Beat; Zimmermann, Markus; Penning, L.; deLoor, R.; Weingarten, K.; Oehler, A.; (2014). High-throughput and high-precision laser micromachining with ps-pulses in synchronized mode with a fast polygon line scanner In: SPIE LASE. San Francisco, California, United States. 06.04.2014. 10.1117/12.2037379

Neuenschwander, Beat; Jaeggi, Beat; Zimmermann, Markus; Penning, L.; deLoor, R. (2014). High Throughput Laser Processing with Ultra-Short Pulses by High Speed Line-Scanning in Synchronized Mode In: CLEO: Applications and Technology (ATu3L.2). Washington, D.C.: OSA 10.1364/CLEO_AT.2014.ATu3L.2

Lauer, Benjamin; Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc (2013). From fs – ns: Influence of the pulse duration onto the material removal rate and machining quality for metals In: ICALEO® 2013: 32nd International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing (pp. 763-770). Laser Institute of America 10.2351/1.5062963

Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc (2013). From fs to Sub-ns: Dependence of the Material Removal Rate on the Pulse Duration for Metals Physics Procedia, 41, pp. 794-801. Elsevier 10.1016/j.phpro.2013.03.150

Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc (2012). From ps to fs: Dependence of the material removal rate and the surface quality on the pulse duration for metals, semiconductors and oxides In: ICALEO® 2012: 31st International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing (pp. 959-968). Laser Institute of America 10.2351/1.5062570

Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc; Lüscher, Beat; Nocera, Carmine (2011). Processing of Industrially Relevant Non Metals with Laser Pulses in the Range Between 10Ps and 50Ps In: International Congress on Applications of Lasers & Electro-optics. Orlando, FL, USA. 23. - 27. October 2011. 10.2351/1.5062327

Jaggi, Beat

Jansson, U.

Jeggi, Beat

Neuenschwander, Beat; Jeggi, Beat; Kramer, Thorsten (October 2016). Influence of the initial Surface Finish of the Ample onto the Machining Quality for Ultra Short Laser Pulses Journal of Laser Applications. https://doi.org/10.2351/1.5118608

Pimenov, Sergei M.; Khomich, Andrey A.; Vlasov, Igor I.; Zadedeev, Evgeny V.; Khomich, Alexander V.; Neuenschwander, Beat; Jeggi, Beat; Romano, Valerio (2014). Metastable carbon allotropes in picosecond-laser-modified diamond Applied Physics A, 116(2), pp. 545-554. Springer 10.1007/s00339-014-8530-0

Joss, Benjamin

Jung, C.H.

Jäggi, B.

Zavedeev, E.V.; Jäggi, B.; Zürcher, Josef; Neuenschwander, Beat; Zilova, O. S.; Shupegin, M. L.; Presniakov, M. Yu.; Pimenov, S. M. (2018). Effects of AFM tip wear on frictional images of laser-patterned diamond-like nanocomposite films Wear, 416-41, pp. 1-5. Elsevier 10.1016/j.wear.2018.09.008

Neuenschwander, Beat; Kramer, Thorsten; Lauer, B.; Jäggi, B. (March 2015). Burst mode with ps- and fs-pulses: Influence on the removal rate, surface quality and heat accumulation In: SPIE Photronics WEST Conference 9350. Bellingham: Society of Photo-Optical Instrumentation Engineers (SPIE) https://doi.org/10.1117/12.2076455

Zimmermann, Markus; Jäggi, B.; Neuenschwander, Beat (2015). Improvements in ultra-high precision surface structuring using synchronized galvo or polygon scanner with a laser system in MOPA arrangement In: SPIE Photonics WEST (p. 935016). SPIE 10.1117/12.2076724

Jäggi, B.; Neuenschwander, Beat; Zimmermann, M.; Penning, L. (2014). High Throughput and High Precision Laser Micromachining with ps-Pulses in Synchronized Mode with a fast Polygon Line Scanner In: 8th International Conference on Photonic Technologies LANE 2014. San Francisco. 01.02.2014 - 06.02.2014.

Jäggi, Beat

Kramer, Thorsten; Remund, Stefan Marco; Jäggi, Beat; Schmid, Marc Jean-Christophe; Neuenschwander, Beat (2018). Ablation Dynamics - from absorption to heat accumulation/ultra-fast laser matter interaction Advanced Optical Technologies, 7(3), pp. 129-144. De Gruyter 10.1515/aot-2018-0010

Neuenschwander, Beat; Jäggi, Beat; Remund, Stefan Marco; Zavedeev, E.; Pimenov, Sergei M. (2018). Machining of semiconductors and dielectrics with ultra-short pulses: Influence of the wavelength and pulse bursts (Conference Presentation) In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII (p. 3). SPIE 10.1117/12.2291909

Jäggi, Beat; Remund, Stefan Marco; Zhang, Yiming; Kramer, Thorsten; Neuenschwander, Beat (2017). Optimizing the specific removal rate with the burst mode und varying conditions JLMN-Journal of Laser Micro/Nanoengineering, 12(3), pp. 258-266. 10.2961/jlmn.2017.03.0015

Jäggi, Beat; Remund, Stefan Marco; Zhang, Yiming; Kramer, Thorsten; Neuenschwander, Beat (2017). Optimizing the specific removal rate with the burst mode under varying conditions JLMN-Journal of Laser Micro/Nanoengineering, 12(3), pp. 258-266.

Jäggi, Beat; Neuenschwander, Beat (October 2016). Optimized Strategies for Seamless Stitching with Synchronized Galvo Scanner and Linear Axis In: 35th ICALEO. San Diego. 16.10.2016 - 20.10.2016. 10.2351/1.5118606

Pimenov, Sergei M.; Khomich, Andrey A.; Neuenschwander, Beat; Jäggi, Beat; Romano, Valerio (2016). Picosecond-laser bulk modification induced enhancement of nitrogen-vacancy luminescence in diamond Journal of the Optical Society of America B, 33(3), B49. 10.1364/JOSAB.33.000B49

Schlüter, Holger; Jäggi, Beat; Neuenschwander, Beat; Zimmertmann, Markus (2016). Laser Applications : Galvo scanners reach megahertz-scale range repetition rates for laser micromachining Laser Focus World, 2016, pp. 41-44.

Lauer, Benjamin; Jäggi, Beat; Zhang, Yiming; Neuenschwander, Beat (October 2015). Measurement of the maximum specific removal rate : unexpected influence of the experimental method and the spot size In: The 34th International Congress on Applications of Lasers & Electro-Optics (ICALEO) (pp. 146-154). Laser Institute of America 10.2351/1.5063162

Lauer, Benjamin; Jäggi, Beat; Neuenschwander, Beat (2014). Influence of the pulse duration onto the material removal rate and machining quality for different types of Steel Physics Procedia, 56, pp. 963-972. ScienceDirect 10.1016/j.phpro.2014.08.116

Pimenov, Sergei M.; Neuenschwander, Beat; Jäggi, Beat; Romano, Valerio (2014). Effect of crystal orientation on picosecond-laser bulk microstructuring and Raman lasing in diamond Applied Physics A Materials Science & Processing, 114(4), pp. 1309-1319. Springer 10.1007/s00339-013-7953-3

Neuenschwander, Beat; Jäggi, Beat; Zimmermann, Markus; Penning, Lars; de Loor, Ronny; Weingarten, Kurt; Oehler, Andreas (2013). High throughput surface structuring with ultrashort pulses in synchronized mode with fast polygon line scanner In: ICALEO® 2013: 32nd International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing (pp. 677-685). Laser Institute of America 10.2351/1.5062949

Kadowaki, K.

Kalentics, Nikola

Karimi, A.

Kern, P.

Kern, P.; Schwaller, Patrick; Michler, J. (2006). Electrolytic deposition of titania films as interference coatings on biomedical implants: Microstructure, chemistry and nano-mechanical properties Thin Solid Films, 494(1-2), pp. 279-286. Elsevier Science 10.1016/j.tsf.2005.09.068

Khomich, Alexander V.

Khomich, Andrey A.

Pimenov, Sergei M.; Vlasov, Igor I.; Khomich, Andrey A.; Neuenschwander, Beat; Muralt, Martin; Romano, Valerio (2011). Picosecond-laser-induced structural modifications in the bulk of single-crystal diamond Applied Physics A, 105(3), pp. 673-677. Springer 10.1007/s00339-011-6645-0

Klein, A.

Zehnder, T.; Matthey, J.; Schwaller, Patrick; Klein, A.; Steinmann, P.-A; Patscheider, J. (2003). Wear protective coatings consisting of TiC–SiC–a-C:H deposited by magnetron sputtering Surface and Coatings Technology, 163-16, pp. 238-244. Elsevier 10.1016/S0257-8972(02)00477-2

Kleiner, Simon

Kloppel, M.

Kollo, L.

Schwaller, Patrick; Patscheider, J.; Kollo, L.; Michler, J. (2004). Microtribological Studies of Different Nanocomposite TiC/a-C:H Coatings Using a Modified Nanoindentation Setup Tribology Letters, 17(4), pp. 757-763. 10.1007/s11249-004-8084-y

Konietzny, Mona

Schwaller, Patrick; Konietzny, Mona (1 June 2019). Mikrotechnik in der Gemälderestaurierung Spirit Biel/Bienne, pp. 10-11. BFH

Kono, S.

Kounga, Alain

Kovacs, I.

Krainer, Lukas

Kramer, Thorsten

Neuenschwander, Beat; Remund, Stefan Marco; Kramer, Thorsten (2019). Laser machining of silicon with bursts of ultra-short laser pulses: Factors influencing the process efficiency and surface quality (Conference Presentation) In: Račiukaitis, Gediminas; Makimura, Tetsuya; Molpeceres, Carlos (eds.) Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV (p. 2). SPIE 10.1117/12.2513297

Kramer, Torsten

Krejci, Ivo

Kreutz, T.

Kreutz, T. J.

Kreutz, T.J.

Kummer, Dieter

Kurapov, D.

Köhli, Benjamin

Laetitia, Philippe

Latrasse, Louis

Laubacher, M.

Lauer, B.

Lauer, Benjamin

Zhang, Yiming; Lauer, Benjamin; Neuenschwander, Beat; Romano, Valerio (2016). Numerical study of the influence of picosecond laser spot size on ablated depth and threshold fluence of metal In: Proc. of SPIE Vol. 9735 97350M-1, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXI (97350M). SPIE 10.1117/12.2210981

Le Donne, Alessia

Li, Liuhe

Lippert, Thomas

Logé, Roland E.

Longoni, Luca

Lorenz, Pierre

Luder, M. A.

Lévy, F.

Lüscher, Beat

Maag, Adrian

Maehne, T.

Makimura, Tetsuya

Mallepell, Marc

Margraf, Patrick

Markauskas, Edgaras

Markovic, Vesna

Marques, Carlos

Ryser, Manuel; Marques, Carlos; Nogueira, Rogério; Romano, Valerio (2015). Yellow laser light generation by frequency doubling of the output from a master oscillator fiber power amplifier system In: Proc. SPIE 9344, Fiber Lasers XII: Technology, Systems, and Applications, 934410. San Francisco / USA. 07.-12.02.2015. 10.1117/12.2080203

Martin, Paul-E.

Mattheus, Stefan

Matthey, J.

Mayrhofer, P. H.

Meier, T.

Meier, Thomas

Michalowski, Andreas

Michler, J.

Michler, Johann

Mikhailov, S.

Zehnder, T.; Schwaller, Patrick; Munnik, F.; Mikhailov, S.; Patscheider, J. (2004). Nanostructural and mechanical properties of nanocomposite nc-TiC/a-C:H films deposited by reactive unbalanced magnetron sputtering Journal of Applied Physics, 95(8), pp. 4327-4334. American Institute of Physics (AIP) 10.1063/1.1650898

Mitterer, C.

Mochiku, T.

Molpeceres, Carlos

Mook, William M.

Moser, B.

Munnik, F.

Muralt, Martin

Mähne, Torsten

Müller, E.

Najafi, H.

Najafi, Hossein

Romano, Valerio; Pilz, Sönke; Najafi, Hossein (2018). Powder Process for fabrication of Rare Earth-Doped Fibers for Lasers and Amplifiers In: Handbok of Optical Fibers (pp. 1-43). Singapore: Springer Nature 10.1007/978-981-10-1477-2_51-1

Pilz, Sönke; Najafi, Hossein; Ryser, Manuel; Romano, Valerio (2017). Granulated Silica Method for the Fiber Preform Production Fibers, 5(3), p. 24. MDPI 10.3390/fib5030024

Narazaki, Aiko

Naumovic, D.

Naumović, D.

Neels, A.

Neels, Antonia

Nelis, Thomas

Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.

Neuenschwander, Beat

Jaeggi, Beat; Remund, Stefan Marco; Streubel, Rene; Goekce, Bilal; Barcikowski, Stefan; Neuenschwander, Beat (2017). Laser micromachining of metals with ultra-short pulses: Factors limiting the scale-up process In: 18t International Symposium on Laser Precision Microfabrication. Toyama / Japan. 05.-08.06.2017.

Zhang, Yiming; Neuenschwander, Beat; Romano, Valerio (2017). Numerical study of the influence of picosecond laser spot size on laser ablation of metal for high laser fluence cases In: Proc. of SPIE Vol. 10091, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII (100910S). SPIE 10.1117/12.2253629

Schwaller, Patrick; Zehnder, S.; von Arx, U.; Neuenschwander, Beat (2011). A novel Model for the Mechanism of Laser-Induced Back Side Wet Etching in Aqueous Cu Solutions using ns Pulses at 1064nm Physics Procedia, 12, pp. 188-194. Elsevier 10.1016/j.phpro.2011.03.121

Nicolet, M.A.

Nicolet, M.A.; Ryser, M.; Romano, Valerio (2015). Electrical resistivity change in amorphous Ta42Si13N45 films by stress relaxation Applied Physics, 118(3), pp. 1153-1160. Springer 10.1007/s00339-014-8931-0

Nishiwaki, Shiro

Nocera, Carmine

Nogueira, Rogério

Novák, Petr M.

Nussbaum, Christian

Oehler, A.

Oehler, A.E.H.

Oehler, Andreas

Ohr, Steffen

Orlando, Fabrizio

Ortega Varela de Seijas, Manuel

Osterwalder, J.

Ouh, C.

Passas, Raphael

Patscheider, J.

Patscheider, Jörg

Pellegrino, Sergio

Penning, L.

Penning, Lars

Persson, P. O. Å.

Pécz, B.

Philippe, L.

Pilz, Sönke

Pilz, Sönke; Najafi, Hossein; Ryser, Manuel; Romano, Valerio (2017). Granulated Silica Method for the Fiber Preform Production Fibers, 5(3), p. 24. MDPI 10.3390/fib5030024

Scheuner, Jonas; Raisin, Philippe Richard; Pilz, Sönke; Romano, Valerio (2016). Design and realisation of leakage channel fibres by the powder-in-tube method In: Proc. SPIE 9886. Micro-Structured and Specialty Optical Fibres IV. 988613. SPIE Photonics West 2016 9886 (p. 988613). SPIE 10.1117/12.2227881

El Sayed, A.; Pilz, Sönke; Ryser, Manuel; Romano, Valerio (2016). Two-dimensional refractive index profiling of optical fibers by modified refractive near-field technique In: Proc. SPIE 9886. Micro-Structured and Specialty Optical Fibres IV. 98861N. SPIE Photonics West 2016 9886 (97440N). SPIE 10.1117/12.2211002

Pimenov, S. M.

Pimenov, S.M.

Pimenov, Sergei

Pimenov, Sergei M.

Presniakov, M. Yu.

Presniakov, M.Yu.

Pöhler, Evelyn

Zimmermann, Tanja; Pöhler, Evelyn; Schwaller, Patrick (2005). Mechanical and Morphological Properties of Cellulose Fibril Reinforced Nanocomposites Advanced Engineering Materials, 7(12), pp. 1156-1161. Wiley-Blackwell - STM 10.1002/adem.200500157

Qiao, Jie

Rabe, R.

Radoiu, Marilena

Raetzo, O.

Raisin, P.

Raisin, Philippe

Raisin, Philippe Richard

Ramos de Campos, J.A.

Račiukaitis, Gediminas

Reiter, A.

Remund, Stefan M.

Remund, Stefan Marco

Jaeggi, Beat; Remund, Stefan Marco; Streubel, Rene; Goekce, Bilal; Barcikowski, Stefan; Neuenschwander, Beat (2017). Laser micromachining of metals with ultra-short pulses: Factors limiting the scale-up process In: 18t International Symposium on Laser Precision Microfabrication. Toyama / Japan. 05.-08.06.2017.

Resan, Bojan

Resing, Markus

Riener, R.

Rohr, L.

Rolfi, Andrea

Romano, Valerio

Pilz, Sönke; Najafi, Hossein; Ryser, Manuel; Romano, Valerio (2017). Granulated Silica Method for the Fiber Preform Production Fibers, 5(3), p. 24. MDPI 10.3390/fib5030024

El Sayed, A.; Pilz, Sönke; Ryser, Manuel; Romano, Valerio (2016). Two-dimensional refractive index profiling of optical fibers by modified refractive near-field technique In: Proc. SPIE 9886. Micro-Structured and Specialty Optical Fibres IV. 98861N. SPIE Photonics West 2016 9886 (97440N). SPIE 10.1117/12.2211002

Romano, Valerio (2015). High-precision confocal reflection measurement for two dimensional refractive index mapping of optical fibers In: Proc. SPIE 9507, Micro-structured and Specialty Optical Fibres IV. Prag / Czech Republic. 13.-18.04. 2015. 10.1117/12.2180988

Rouffiange, Vincent

Rufer, Jean-Martin

Ruffieux, P.

Ruffieux, Pascal

Ryser, M.

Ryser, Manuel

Pilz, Sönke; Najafi, Hossein; Ryser, Manuel; Romano, Valerio (2017). Granulated Silica Method for the Fiber Preform Production Fibers, 5(3), p. 24. MDPI 10.3390/fib5030024

El Sayed, A.; Pilz, Sönke; Ryser, Manuel; Romano, Valerio (2016). Two-dimensional refractive index profiling of optical fibers by modified refractive near-field technique In: Proc. SPIE 9886. Micro-Structured and Specialty Optical Fibres IV. 98861N. SPIE Photonics West 2016 9886 (97440N). SPIE 10.1117/12.2211002

Rzepiejewska-Malyska, Karolin

Santinacci, L.

Scheu, Ch.

Scheuner, J.

Scheuner, Jonas

Schiess, Marc

Schiess, Marc (26 July 2019). Interdisziplinarität als Klebstoff Bieler Tagblatt, p. 9.

Schlapbach, L.

Schlapbach, Louis

Schlüter, Holger

Schmid, Marc

Schmid, Marc Jean-Christophe

Schmuki, P.

Schneuwly, A.

Schoelkopf, Joachim

Schwaller, P.

Schwaller, Patrick

Schwaller, Patrick; Konietzny, Mona (1 June 2019). Mikrotechnik in der Gemälderestaurierung Spirit Biel/Bienne, pp. 10-11. BFH

Schwaller, Patrick (3 March 2017). Einen Zahn zugelegt Spirit Biel/Bienne, 1, p. 7. BFH

Schwaller, Patrick (1 June 2011). Oberflächen mit Laser mikrostrukturieren Oberflächen Polysurfaces, 11(6), pp. 19-21.

Schütt, Andrea

Schütz, Peter

Scorticati, Davide

Selbmann, Karl-Heinz

Senn, Florian

Shimoda, M.

Shin, Woojin

Shklover, V.

Shupegin, M. L.

Shupegin, M.L.

Shupegin, Mikhail

Simmen, Franziska

Singer, J.M.

Sivillica, Fabio

Spuehler, Gabriel

Spühler, Gabriel J.

Srot, V.

Stauss, S.

Stauss, Sven

Steinmann, P.-A

Stirnimann, Adrian

Streubel, Rene

Jaeggi, Beat; Remund, Stefan Marco; Streubel, Rene; Goekce, Bilal; Barcikowski, Stefan; Neuenschwander, Beat (2017). Laser micromachining of metals with ultra-short pulses: Factors limiting the scale-up process In: 18t International Symposium on Laser Precision Microfabrication. Toyama / Japan. 05.-08.06.2017.

Stuck, A.

Suter, T.

Thapliyal, R.

Tiwari, Ayodhya N.

Tobler, M.

Tóth, L.

Tschopp, Gerhard

Urniezius, Aivaras

Usala, John D.

Vaihinger, Markus

Vallittu, Pekka K.

Vlasov, Igor I.

Volkmer, Thomas

Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.

Wang, Yaohui

Wang, Yaohui; Zhang, Xu; Wu, Xianying; Zhang, Huixing; Zhang, Xiaoji (2008). Superhard nanocomposite nc-TiC/a-C:H film fabricated by filtered cathodic vacuum arc technique Applied Surface Science, 254(16), pp. 5085-5088. Elsevier 10.1016/j.apsusc.2008.02.011

Wang, Yaohui; Zhang, Xu; Wu, Xianying; Zhang, Huixing; Zhang, Xiaoji (2008). Compositional, structural and mechanical characteristics of nc-TiC/a-C:H nanocomposite films Applied Surface Science, 255(5), pp. 1801-1805. Elsevier 10.1016/j.apsusc.2008.06.020

Export as	Atom RSS 1.0 RSS 2.0

ARBOR

Department of Engineering and Information Technology > Institute for Applied Laser, Photonics and Surface Technologies

Abukawa, T.

Adusumalli, Ramesh-Babu

Aeberhard, M.

Aebi, P.

Aksöz, E. A.

Alander, Pasi

Alexander, Duncan T. L.

Ammann, A.

Ammann, Hubert

Antonin, Olivier

Appert, Christoph

Arutyunyan, N. R.

Arutyunyan, N.R.

Arutyunyan, Natalia

Bacher, C.

Bacher, Christoph

Balogh-Michels, Zoltán

Bandi, T.

Barcikowski, Stefan

Barinov, A.D.

Beeli, C.

Bemaud, David

Benetti, M.

Benetti, Marco

Berger, H.

Berger, S.

Berger, Stefan Karl

Bielmann, Michael

Binder-Macleod, S. A.

Binetti, Simona

Birch, J.

Blanc, M.

Blank, E.

Boas, Jolien

Boeckler, Ernst W.

Bonderer, L.

Boschung, P.

Bouillaguet, Serge

Breguet, J.-M.

Bruening, Stephan

Bruneel, D.

Brüning, Stephan

Bucaille, J.-L.

Bucaille, Jean-Luc

Bucheler, Stephan

Bucher, Guido

Buecheler, Stephan

Buerki, Gerhard

Burn, Andreas

Busto, Chiara

Butkus, Simas

Bürki, G.

Cai, Xun

Cam, Peter

Cangueiro, L.

Castaldi, L.

Cattani-Lorente, Maria

Chaja, Michalina

Chaja, Michalina V.

Chaja, Michalina W.

Chen, Qiulong

Chu, Paul K.

Chudoba, Thomas

De Loor, Ronny

Deichmann, W.

Denkel, Christoph

Diserens, M.

Djenizian, T.

Dommann, A.

Dommann, Alex

Dury, Noémie

Döbeli, Max

Ehrhardt, M.

Ehrhardt, Martin

Eilzer, S.

Eklund, P.

El Sayed, A.

El Sayed, Ali