School of Architecture, Wood and Civil Engineering > Institute for Materials and Wood Technology

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Name | Item Type | Refereed | No Grouping
Jump to: 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003
Number of items at this level: 264.

2023

Jäger, Elena; André, Guillaume; Volkmer, Thomas (12 October 2023). The impact of various heat post-treatments on the Brinell hardness and set recovery on densified fir and poplar In: 19th Annual Meeting of the Northern European Network of Wood Science and Engineering. As, Norway. 11.-12.10.2023.

Gurtner, Nadine; Starovicova, Barbora (September 2023). Wiederverwendung in der schweizerischen Bauindustrie: Potentiale, Herausforderungen und Ansatzpunkte Bern/Biel: Berner Fachhochschule, Wirtschaft, Institut für Innovation & Strategic Entrepreneurship / Architektur, Holz und Bau, Institut für Werkstoffe und Holztechnologie

Tschannen, Christof; Thömen, Heiko; Shalbafan, Ali (2023). Development of an Electrically Conductive MDF Panel—Evaluation of Carbon Content and Resin Type Polymers, 15(4), pp. 1-16. MDPI doi.org/10.3390/polym15040912

Shalbafan, Ali; Thömen, Heiko (2023). Development of Mineral-Bonded Plywood with Magnesium Oxychloride as a Binder Using the Hot-Pressing Process Polymers, 15(4), p. 805. MDPI 10.3390/polym15040805

Dorn, Liam Calvin Hilton; Thirion, Arthur Xavier Julien Michel; Ghorbani, Masoumeh; Olaechea von Sonnenberg, Luis Miguel; Mayer, Ingo (2023). Exploring Fully Biobased Adhesives: Sustainable Kraft Lignin and 5-HMF Adhesive for Particleboards Polymers, 15(12), p. 2668. MDPI 10.3390/polym15122668

2022

Shalbafan, Ali; Thömen, Heiko (2022). Influence of Pressing Schedule and Adhesive Content on the Rheological Behavior of Wood Fiber-Furnish Mats Materials and Structures, 15(4), p. 1413. Springer 10.3390/ma15041413

Volkmer, Thomas (2022). Anatomie des Holzes In: Ferrer, Carla; Hildebrand, Thomas; Martinez-Cañavate, Celina (eds.) Touch Wood Material, Architektur, Zukunft (pp. 82-83). Zürich: Lars Müller Publishers

Ganne-Chédeville, Christelle; Pichelin, Frédéric; Geiser, Martin; Staub, Peter (2022). Technik, Ökobilanz - und Romantik In: Ferrer, Carla; Hildebrand, Thomas; Martinez-Cañavate, Celina (eds.) Touch Wood: Material, Architektur, Zukunft (pp. 84-88). Zürich: Lars Müller Publishers

2021

Franke, Tom; Volkmer, Thomas (2021). Mineralization treatment of European oak heartwood with calcium oxalate for improved fire retardancy Holzforschung, pp. 1-12. De Gruyter https://doi.org/10.1515/hf-2021-0055

Ozyhar, Tomasz; Tschannen, Christof; Thömen, Heiko; Zoppe, Justin O. (2021). Evaluating the use of calcium hydrogen phosphate dihydrate as a mineral-based fire retardant for application in melamine-urea-formaldehyde (MUF)-bonded wood-based composite materials Fire and Materials, 46(3), pp. 595-604. Wiley https://doi.org/10.1002/fam.3009

Khojasteh Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2021). Development of ultra‑light foam‑core fibreboard for furniture application European Journal of Wood and Wood Products, 79, pp. 1435-1449. Springer https://doi.org/10.1007/s00107-021-01723-0

2020

BERNER FACHHOCHSCHULE BIEL ARCH HOLZ UND BAU [CH] (2020). Strukturelement mit elektrisch leitenden Eigenschaften und Verfahren zu dessen Verwendung (WO2020244953A1)

Eigenheer, Andreas (2020). Timber Startup Incubator Lignarius - die Zeitschrift der Swiss Timber Engineers STE, pp. 6-7. Swiss Timber Engineers STE

Ozyhar, Tomasz; Tschannen, Christof; Hilty, Florentine; Thömen, Heiko; Schoelkopf, Joachim; Zoppe, Justin O. (2020). Mineral-based composition with deliquescent salt as flame retardant for melamine–urea–formaldehyde (MUF)-bonded wood composites Wood Science and Technology, 55(1), pp. 5-32. Springer 10.1007/s00226-020-01230-0

Khojasteh-Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Consumer behavior assessment regarding lightweight furniture as an environmentally-friendly product Wood Material Science & Engineering, 17(3), pp. 192-201. Taylor & Francis 10.1080/17480272.2020.1847187

Shalbafan, A.; Thömen, Heiko (November 2020). Improving bio-based poly ( lactic acid ) properties using polycarbonate In: 14th International Seminar on Polymer Science and Technology (ISPST 2020). Tabiat Modares University, Tehran. 9.-12. Nov. 2020.

Ganne-Chédeville, Christelle; Ratsch, Gunther (October 2020). La méthode BIM et les écobilans spirit biel/bienne Biel/Bienne: BFH

Tschannen, Christof; Thömen, Heiko (July 2020). Development of a concept for electrically conductive furniture panels In: Society of Wood Science and Technology International Convention (pp. 242-252). Society of wood science and technology

Ganne-Chédeville, Christelle; Büsser, Katrin; Teixeira Pinho, Joana (June 2020). Écobilans des bâtiments spirit biel/bienne Biel/Bienne: BFH

Lehmann, Martin (June 2020). Neue Möglichkeiten dank hochfestem Stabschichtholz aus Buche spirit biel/bienne, pp. 10-11. Biel/Bienne: BFH

Mayer, Ingo (February 2020). Des animaux sains grâce aux tanins du bois suisse spirit biel/bienne : das Magazin der technischen Disziplinen der Berner Fachhochschule = le magazine des disciplines techniques de la Haute école spécialisée bernoise(1) Biel/Bienne: Berner Fachhochschule BFH, Departement Architektur, Holz und Bau, Departement Technik und Informatik

Khojasteh Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Evaluation of Adhesion Strength of Coatings and Face Layers Properties of Foam Core Lightweight Panels Journal of Color Science and Technology, 14(1), pp. 1-11.

Khojasteh-Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products European Journal of Wood and Wood Products, 78(3), pp. 593-603. Springer 10.1007/s00107-020-01519-8

Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1

Shalbafan, Ali; Nadali, Amin; Thömen, Heiko (2020). A Multifunctional Mineral Binder for Plywood Production: The Effect of Manufacturing Parameters on Bonding Quality Materials, 13(10), p. 2360. 10.3390/ma13102360

Ehrhart, Thomas; Steiger, René; Lehmann, Martin; Frangi, Andrea (2020). European beech (Fagus sylvatica L.) glued laminated timber: lamination strength grading, production and mechanical properties European Journal of Wood and Wood Products, 78(5), pp. 971-984. 10.1007/s00107-020-01545-6

Clerc, Gaspard (2020). Analysis of the fatigue performance of adhesively bonded wood joints (Dissertation, Technische Universität München, Fakultät für Bau Geo und Umwelt)

Bockel, S.; Harling, S.; Konnerth, J.; Niemz, Peter; Weiland, G.; Hogger, E.; Pichelin, Frédéric (2020). Modifying elastic modulus of two-component polyurethane adhesive for structural hardwood bonding Journal of Wood Science, 66(1) Springer 10.1186/s10086-020-01917-9

Munier, Leo F.; Franke, Tom; Herold, Nadine; Pfriem, Alexander (2020). Humidity's Effect on the Dynamic-mechanical Behavior of Phenol-formaldehyde Impregnated Beech Wood Veneer BioResources, 15(1), pp. 1563-1574. North Carolina State University 10.15376/biores.15.1.1563-1574

Näher, Thomas; Thömen, Heiko; Burgert, Ingo (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft Zürich: Swiss Wood Innovation Network S-Win

Shalbafan, Ali; Thömen, Heiko (2020). Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features Applied Sciences, 10(2), p. 593. MDPI 10.3390/app10020593

2019

Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1

Lehmann, Martin (October 2019). Keilzinkung und Flächenverklebung von Buchenlamellen In: S-Win 51. Fortbildungkurs - Hochleistungswerkstoffe im Holzbau. S-Win

Mund, Axel; Munier, Leo Felix; Franke, Tom; Herold, Nadine; Pfriem, Alexander (September 2019). Investigating the shape stability of moulded phenol-formaldehyde modified beech veneers by means of digital image correlation In: 21st International Nondestructive Testing and Evaluation of Wood Symposium (pp. 18-24). Madison, WI: USDA Forest Products Laboratory

Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung

Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003

Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035

Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008

Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001

Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.

Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104

Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD

Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH

Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001

Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644

Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832

Thömen, Heiko (2019). Rohstoffe effizienter einsetzen - das Modell dazu spirit biel/bienne, 1, pp. 14-15. BFH

Thömen, Heiko; Job, Charles (2019). Hochflexible Beleuchtungslösungen in Möbeln spirit biel/bienne, 2, pp. 16-17. Biel/Bienne: BFH

Mayer, Ingo (2019). VOC-Emissionen aus mehrschichtigen Wand- und Deckenelementen in Holz-Rahmenbauweise HolzBauSpezial Bauphysik & Gebäudetechnik, 10, pp. 421-431. Forum Holzbau

Mayer, Ingo; Selbmann, Karl-Heinz (2019). 3D drucken mit Holz Spirit biel/bienne, 1, p. 16. BFH

Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21. BFH

Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27. BFH

Ganne-Chédeville, Christelle (2019). Observer et imiter la nature spirit biel/bienne, 2, p. 19. BFH

Kolb, Hanspeter; Volkmer, Thomas (2019). Pour du bois résistant mieux au feu et à la lumière spirit biel/bienne, 2, pp. 8-9.

Canoine, Benoît (2019). Le bois densifié, un bois «exotique» local spirit biel/bienne, 2, p. 23. BFH

Thömen, Heiko; Homerin, Benoît; Bernardy, Gregor; Steffen, Andreas (2019). Dichte von Holzwerkstoffen in Echtzeit vorhersagen Holz-Zentralblatt(21), pp. 446-447.

Ehrhart, Thomas; Lehmann, Martin; Frangi, Andrea (2019). European beech ( Fagus sylvatica L .) glued laminated timber : Lamination strength grading , production and mechanical properties In: International Scientific Conference on Hardwood Processing, ISCHP 19 (pp. 252-267). TU Delft

Franke, Tom; Volkmer, Thomas (2019). Mineralization of European oak with various ionic salt solutions to achieve an in situ precipitation of calcium oxalate In: IRG50 Scientific Conference on Wood Protection. Proceedings IRG Annual Meeting (pp. 1-12). Stockholm, Sweden: The International Research Group on Wood Protection IRG/WP

Franke, Tom; Volkmer, Thomas (2019). Treatment of European beech with a new wood fire retardant agent based on in situ deposition of calcium oxalate Holzforschung, 73(11), pp. 1047-1050. De Gruyter 10.1515/hf-2019-0043

OPAL CRÉATIONS SA (2019). Wood treatment method (WO2019012403 (A1))

Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press

2018

Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMALLY CURABLE RESIN AND RESIN OBTAINABLE BY THE METHOD (EP 3 366 468 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCING THERMOSETTING PHENOLIC RESINS AND PHENOLIC RESINS OBTAINABLE BY THE METHOD (US 2018/0244824 A1)

AVALON Industries AG (2018). METHOD FOR PRODUCTION OF WOOD COMPOSITE PRODUCTS AND WOOD COMPOSITE PRODUCTS OBTAINED BY USING THIS METHOD (EP 3 366 713 A1)

Mayer, Ingo; Hinterleitner, Christina (2018). Décontaminer les biens culturels spirit biel/bienne, 1, pp. 18-19. BFH

Mayer, Ingo (2018). Les fins limiers de la BFH au service d’un air ambiant sain spirit biel/bienne, 3, pp. 8-9. BFH

Thömen, Heiko; Wirth, Filipp (2018). Le bien-être – grâce à la réalité virtuelle ? spirit biel/bienne, 3, p. 25. BFH

Noël, Marion (2018). Des pistes vertes pour protéger le bois spirit biel/bienne, 3, pp. 14-15. BFH

Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21. BFH

Niemz, Peter (2018). Fichten-Klangholz aus dem Schweizer Jura Holz-Zentralblatt, 33

Brunner, A.J.; Clerc, Gaspard; Niemz, Peter (2018). Acoustic emission monitoring of adhesively bonded wood joints under quasistatic and cyclic fatigue mode II flexure loads using end-notch-flexure specimens In: 33rd European Conference on Acoustic Emission Testing. Senlis, France. 12-14.09.2018.

Grosse, C.; Noël, Marion; Thevenon, M.; Gérardin, P. (2018). FTIR-ATR monitoring of chemical changes of thermo-chemically modified beech wood degraded by brown-rot fungus In: IRG49 - International Research Group on Wood Protection. Johannesburg, South Africa. 29.04-03.05.2018.

Franke, Tom; Volkmer, Thomas (2018). Mineralization of wood with calcium oxalate In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17-18.09.2018.

Clerc, Gaspard; Lehmann, Martin; Gabriel, Joseph; Salzgeber, Dario; Pichelin, Frédéric; Niemz, Peter (2018). Improvement of ash (Fraxinus Excelsior L.) bonding quality with one component polyuerethane adhesive and a primer for glued laminated timber In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.

Lehmann, Martin; Clerc, Gaspard; Lehringer, C.; Strahm, T.; Volkmer, Thomas (2018). Investigation of the bond quality and the finger joint strength of beech glulam In: World Conference on Timber Engineering (WCTE 2018). Seoul, Republic of Korea. 20.-23.08.2018.

Grosse, Charlotte; Spear, Morwenna; Curling, Simon F.; Noël, Marion; Rautkari, Lauri; Uimonen, Tuuli; Gérardin, Philippe (2018). Dynamic mechanical thermal analysis of wood modified with bio- polyesters In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.

Noël, Marion; Grosse, Charlotte; Burud, I.; Gérardin, Philippe (2018). Biopolyesters for wood modification : technical validation towards implementation In: 9th European Conference on Wood Modification. Arnhem, The Netherlands. 17.-18.09.2018.

Volkmer, Thomas (2018). Funktionaler Oberflächenschutz von Holzfassaden In: 24. Internationales Holzbau-Forum IHF. Garmisch-Partenkirchen, Germany. 05-07.12.2018.

Themessl, Adam Maximilian; Lehmann, Martin; Salzgeber, D.; Franke, Steffen (2018). Butt joint gluing of bross laminated timber In: 2018 World Conference on Timber Engineering. Seoul, Republic of Korea. 20.-23.08.2018.

Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279

2017

Ganne-Chédeville, Christelle (2017). Woodenboxspring - sommeil en harmonie avec la nature spirit biel/bienne, 1, pp. 8-9. BFH

Frei, Reto (2017). Un pas en avant vers des matériaux renouvelables efficaces spirit biel/bienne, 1, pp. 16-17. BFH

Thömen, Heiko (2017). Légèreté pour le mobilier spirit biel/bienne, 1, pp. 24-25. BFH

Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15. BFH

Volkmer, Thomas (2017). Le bois, résistant au feu et durable, grâce aux minéraux cristallisés spirit biel/bienne, 2, p. 26. BFH

Suttie, E.; Hill, C.; Sandin, G.; Kutnar, A.; Ganne-Chédeville, Christelle; Lowres, F.; Dias, A. C. (2017). Environmental assessment of bio-based building materials In: Jones, D.; Brischke, C. (eds.) Performance of bio-based building materials (pp. 547-591). Duxford, United Kingdom: Woodhead Publishing 10.1016/B978-0-08-100982-6.00009-4

Thömen, Heiko; Homerin, Benoit (2017). Modernste Prozessleittechnik - Integration eines mathematisch-physikalischen Modells in ein industrielles Prozessleitsystem In: 12. Holzwerkstoffkolloquium. Dresden, Germany. 14.-15.12.2017.

Volkmer, Thomas; Gyr, R.; Kaiser, P. (2017). Methoden der Holzmodifikation zur Verbesserung der Dauerhaftigkeit und des Brandschutzes In: 49. Fortbildungskurs S-WIN: Holzbau heute - effizient, geschützt und dauerhaft. Weinfelden, Schweiz. 24.-25.10.2017.

Grosse, Charlotte; Noël, Marion; Rautkari, Lauri; Gerardin, Philippe (2017). Influence of hygro-thermal treatment temperature and duration on dimensional stabilisation of wood modified with poly (butylene succinate) In: Scientific Conference on Wood Protection. Ghent, Belgium. 04.-08.06.2017.

Volkmer, Thomas; Lehmann, Martin; Clerc, Gaspard (2017). Brettschichtholz aus Buche: Keilzinkenverbindung und Flächenverklebung In: 23. Internationales Holzbau-Forum. Garmisch-Partenkirchen, Deutschland. 06.-08.12.2017.

Niemz, Peter (2017). Zur Orthotropie der physikalisch-mechanischen Eigenschaften von Fichtenholz Annals of Warsaw University of Life Sciences - SGGW Forestry and Wood Technology, 99, pp. 174-183.

Niemz, Peter; Sonderegger, Walter (2017). Holzphysik München, Deutschland: Carl Hanser Verlag GmbH & Co. KG 10.3139/9783446445468

2016

Pichelin, Frédéric (2016). «Cocoboard» panneaux biosourcés à base de fibres de coco spirit biel/bienne, 2, p. 22. Berner Fachhochschule BFH

Mayer, Ingo (2016). Polyvalent et durable – Le tanin issu des forêts suisses spirit biel/bienne, 2, pp. 24-25. Berner Fachhochschule BFH

Mayer, Ingo (2016). Qualité de l’air intérieur: Matériaux sans émissions et inodores, question d’actualité spirit biel/bienne, 3, p. 12. Berner Fachhochschule BFH

Niemz, Peter (2016). Einfluss von Feuchteschwankungen bei Verklebungen Holz-Zentralblatt, pp. 1219-1221.

Clerc, Gaspard; Volkmer, Thomas; Pichelin, Frédéric; Niemz, Peter (2016). Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.

Grosse, Charlotte; Thévenon, Marie France; Noël, Marion; Gerardin, Philippe (2016). Optimising wood chemical modification with lactic acid oligomers by screening of processing conditions and chemical additives In: 47th IRG Annual Meeting. Lisbon, Portugal. 15.-19.05.2016.

Lehmann, Martin; Schlegel, S.; Ammann, S.; Beyer, M.; Aeh, K.; Jung, H.; Niemz, Peter (2016). Investigation of the bond quality of semi industrially produced ash glulam In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.

Niemz, Peter; Ammann, Samuel D. (2016). Mechanical performance of glue joints in structural hardwood elements In: World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. 22.-25.08.2016.

2015

Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013

Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002

Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4

Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002

Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2

Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23. Berner Fachhochschule BFH

Campiche, Sophie; Ganne-Chédeville, Christelle; Volkmer, Thomas; Grand, Emilie; Werner, Inge; Ferrari, Benoit J.-D. (2015). Current knowledge and evaluation of potential toxicity for soil organisms Lausanne: Centre Ecotox

Thömen, Heiko; Viemeister, D. (2015). Bestimmung der Klebstoffverteilung im industriellen Holzwerkstoffprozess In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.

Yoon, Yonghoon; Smole, Jože; Rhême, Martin; Thömen, Heiko; Plummer, Christopher J.G.; Månson, Jan-Anders E. (2015). Solid state polylactide-poly (methyl methacrylate) precursors for the in-line production of foam core sandwich structures In: 20th International Conference on Composite Materials. Copenhagen, Denmark. 19.-24.07.2015.

Brunner, Andreas J.; Baensch, Franziska; Sause, Markus G. R.; Zauner, Michaela; Niemz, Peter (2015). Schallemissionsanalyse und Synchrotron- basierte Mikrotomografie an verklebten Miniatur-Zugprüfkörpern aus Fichtenholz In: 20. Kolloquium Schallenemission. Garmisch-Partenkirchen, Germany. 18.-19.06.2015.

Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: Proceedings of the IAWPS 2015. Tokyo, Japan. 15.-17.03.2015.

Niemz, Peter; Zauner, M.; Brunner, A. J. (2015). In - situ Synchrotron based micro - tomography and acoustic emission measurement of Norway spruce samples under tensile load In: 19th. International Symposium on Nondestructive Testing and Evaluation of wood. Rio de Janeiro, Brazil. 22.-25.09.2015.

Niemz, Peter (2015). In-situ-Untersuchungen an Holzproben mittels Synchrotron-Tomographie In-situ Synchrotron based micro-tomography on wood samples In: 3. Holzanatomisches Kolloquium. Dresden, Germany. 01-02.10.2015.

Niemz, Peter; Ozyhar, Tomasz; Hering, Stefan; Sonderegger, Walter (2015). Moisture dependent physical-mechanical properties from beech wood in the main directions In: International Conference "Wood Science and Engineering in the Third Millennium" - ICWSE 2015. Brasov, Romania. 05.-07.11.2015.

Fitzken, J.; Vinci, D.; Niro, M.; Kyriazopoulos, Michail; Bianchi, Sauro; Eusebio, D. A.; Arboleda, J. R.; Lanuzo, M. M.; Pichelin, Frédéric (2015). Development of medium an low density fibreboards made of milled coconut hust and bound with formaldehyde free tannin-based adhesive In: Proceedings of the International Panel Products Symposium 2015. Llandudno / Wales, UK. 07.-08.10.2015.

Mayer, Ingo; Nie, Yunyun (2015). Fully automated, on-line micro-scale chamber method for determination of volatile organic compound emissions from building products In: 17th Workshop “Geruch und Emissionen bei Kunststoffen“. Kassel, Germany. 16.-17.03.2015.

Bianchi, Sauro; Mayer, Ingo; Pichelin, Frédéric (2015). Chemische Eigenschaften von Rindenextrakten und Einsatz daraus hergestellter tanninbasierter Klebstoffe In: 11. Holzwerkstoffkolloquium. Dresden, Germany. 10.-11.12.2015.

Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641

Ammann, Samuel; Niemz, Peter (2015). Specific fracture energy at glue joints in European beech wood International Journal of Adhesion and Adhesives, 60, pp. 47-53. Elsevier 10.1016/j.ijadhadh.2015.03.007

Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072

Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152

Güntekin, Ergün; Aydın, Tuğba Yılmaz; Niemz, Peter (2015). Prediction of compression properties in three orthotropic directions for some important Turkish wood species using ultrasound BioResources, 10(4), pp. 7252-7262. North Carolina State University

2014

Geers, C.; Rodríguez-Lorenzo, L.; Placencia Peña, M.I; Brodard, P.; Volkmer, Thomas; Rothen-Rutishauser, B.; Petri-Fink, A. (2014). Visualization of gold/silver nanostars in wood by surface enhanced Raman spectroscopy In: 45th IRG Annual Meeting. Las Vegas, USA. 11.-15.05.2014.

Volkmer, Thomas; Franke, Bettina; Schusser, Anna (2014). Analysis of the Penetration of Adhesives at Finger-Joints in Beech Wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Lehmann, Martin; Volkmer, Thomas (2014). Influence of micro structured surface on the bond quality of hardwood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Lehmann, Martin; Froidevaux, J.; Pichelin, Frédéric (2014). Structural light weight construction panel based on beech wood In: World Conference on Timber Engineering 2014. Quebec City, Canada. 10.-14.08.2014.

Lehmann, Martin; Volkmer, Thomas (2014). Investigation of the bond quality of hardwoods with micro structured surfaces In: 68th FPS International Convention. Quebec City, Canada. 10.-13.08.2014.

Pichelin, Frédéric (2014). Grundlagen der (Holz)verklebung In: S-Win Tagung / 46. Fortbildungskurs - Holzverbindungen mit Klebstoffen für die Bauanwendung. Weinfelden, Switzerland. 21.-22.10.2014.

Mayer, Ingo (2014). Gerüche und Emissionen von Parkett- und Steinbodenölen In: 16th Workshop "Geruch und Emissionen bei Kunststoffen". Kassel, Germany. 24.-25.03.2014.

2013

Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5

Strautmann, Jean; Noël, Marion; Volkmer, Thomas (October 2013). Surface qualification of weathered wood In: Joint COST FP0904 & FP1006 International Proceeding of the Workshop on characterization of modified wood in relation to wood bonding and coating performance. Rogla, Slovenia. 16-18 Oct 2013.

Benthien, Jan T.; Thömen, Heiko (2013). Effects of agglomeration and pressing process on the properties of flat pressed WPC panels Journal of Applied Polymer Science, 129(6), pp. 3710-3717. John Wiley & Sons, Ltd 10.1002/app.39155

Schmidt, Henrik; Benthien, Jan T.; Thömen, Heiko (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels European Journal of Wood and Wood Products, 71(5), pp. 591-597. Springer 10.1007/s00107-013-0719-y

Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries

Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019

Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004

2012

Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4

Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148

Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735

Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard; Lehmann, Martin (2012). Measures for the maintenance of untreated wood facades In: World Conference on Timber Engineering (WCTE 2012). Auckland, New Zealand. 15-19.07.2012.

Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839

2011

Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.

Placencia, Maria Inés; Pizzi, Antonio; Pichelin, Frédéric (June 2011). Linear friction welding for wood, a parameters study for up-scaled assemblies In: CIMAD 11 – 1º Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal. 7-9 Jun 2011.

Zürcher, Ernst (June 2011). Dufthölzer - Bäume an deren Duft erkennen In: Schweizerische Beiträge zur Dendrologie. Zürich: Schweizerischen Dendrologischen Gesellschaft (SDG)

Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034

Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003

Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088

Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346

Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.

Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.

Zürcher, Ernst (2011). Plants and the moon - Traditions and phenomena HerbalEGram, 8(4), pp. 1-14. American botanical council

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.

2010

Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee

Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.

Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).

Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).

Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.

Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2

Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard (2010). Nachhaltige Reinigung von unbehandelten Holzfassaden – Ergebnisse aus laufenden Forschungsprojekten In: 42. SAH Fortbildungskurs. SAH

Lehmann, Martin; Brunner, Maurice Yaw; Kraft, Sebastian (2010). Higher load bearing capabilities with elastic glue lines for glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.

Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.

Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2010). Reinigung von unbehandelten Holzfassaden Holzbaumarktschweiz : Fachmagazin für Holzbau, Architektur, Innenausbau, Produktion, 5, pp. 12-14.

Mayer, Ingo (2010). Ist die Luft rein? – Emissionen aus lackierten Oberflächen in die Innenraumluft In: InteriorDays. Biel/Bienne, Switzerland. 16.-17.09.2010.

Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.

Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.

Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.

Thömen, Heiko; Gonin, Marc-André (2010). European master programs in wood science and technology In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-7). United Nations Economic Commission for Europe – Timber Committee

Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.

Zürcher, Ernst (2010). Holzgeruch – eine unbeachtete, jedoch wirksame Eigenschaft Bündner Wald, 6, pp. 69-74. Gasser

Zürcher, Ernst; Rogenmoser, Christian (2010). Considering reversible variations in wood properties : possible applications in the choice of the tree-felling date ? In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.

Zürcher, Ernst; Schlaepfer, R.; Giudici, F.; Conedera, M. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste

Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.

Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press

Thömen, Heiko; Walther, Thomas (2010). Grundlegende Untersuchungen zur Herstellung und Struktur von Holzwerkstoffen [Textbook] . Biel/Bienne, Schweiz: Berner Fachhochschule Architektur, Holz und Bau

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097

Tonnellerie Taransaud (2010). Wood barrel, production method thereof and machine for implementing same (EP2200793 (A1))

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0

Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759

2009

Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12. Verband Schweizerischer Schreinermeister und Moebelfabrikanten

Mayer, Ingo (November 2009). Divergencias de color en Black Cherry aumentan Holz-Zentralblatt, Edición especial en lengua española por la „Fimma-Maderalia“, pp. 20-21.

Zürcher, Ernst; Schläpfer, R.; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH

Zürcher, Ernst; Rogenmoser, Christian; Quartney, Gladys A. (November 2009). Wenig bekannte Holzarten Westafrikas Holzforschung Schweiz, 2, pp. 12-14. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH

Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.

Vallée, T.; Tannert, T.; Lehmann, Martin; Brunner, Maurice Yaw (July 2009). Probabilistic strength prediction of adhesively bonded joints composed of wooden adherends In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.

Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag

Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0

Brunner, Maurice Yaw; Lehmann, Martin (2009). Frp-prestressed timber : losses in prestressing force due to elastic , creep and shrinkage deformations of the timber In: FRPRCS. Sydney, Australia. 13-15 Jul 2009.

Brunner, Maurice Yaw; Schnüriger, Marco; Roemer, Michael (2009). Holz-Beton-Platten mit Klebeverbund In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 705-710). Biberach: Institut für Holzbau Hochschule

Brunner, Maurice Yaw; Zürcher, Ernst (2009). Holzbrückenbau in Afrika: Neue Wege für Ghana Schweizer Holzbau, pp. 19-21.

Donzé, Marc; Brunner, Maurice Yaw (2009). Elastisch nachgiebige Klebefuge für Brettschichtholz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 819-824). Biberach, Deutschland: Institut für Holzbau Hochschule Biberach

Ganne-Chédeville, Christelle (2009). Schweißen von Holz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 1-6). Biberach, Deutschland: Institut für Holzbau, Hochschule Biberach

Lehmann, Martin (2009). Verstärkung von Holz mittels vorgespannten CFK-Lamellen In: Fortbildungskurs der SAH: Werkstoffkombinationen – ein Mehrwert für Holz (pp. 1-12). SAH

Lehmann, Martin; Vallée, T.; Tannert, T.; Brunner, Maurice Yaw (2009). Adhesively bonded joints composed of wooden load-bearing elements In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.

Letsch, Bernhard (2009). Forschungsprojekt Fassaden Holzbaumarktschweiz(1), pp. 12-13. FS Media

Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.

Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management

Volkmer, Thomas; Höltschi, Christoph (2009). Holzfassaden verändern ihre Farbe Applica : Die Zeitschrift für das Maler- und Gipsergewerbe, 5, pp. 12-16. Schweizerischer Maler- und Gipserunternehmer-Verband ; Schweizerischer Maler- und Gipsermeister-Verband

Volkmer, Thomas; Höltschi, Christoph (2009). Zahn der Zeit Immobilia : Zeitschrift für die Immobilienwirtschaft(6), pp. 37-38. SVIT Verlag AG

GEISTLICH & SOEHNE AG (2009). Glued laminated beam (EP2090413 (A1))

2008

Ganne-Chédeville, Christelle (2008). Wood welding by linear friction: investigations and understanding of the physical and chemical modifications and development of an innovative technology. (Dissertation, Université Henri Poincaré - Nancy I)

Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939

Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020

Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).

Brunner, Maurice Yaw; Donzé, Marc (2008). GLULAM REBORN : A flexible adhesive interface to increase the bending resistance of glulam Applied Sciences, p. 2008.

Brunner, Maurice Yaw; Schnueriger, M.; Lehmann, Martin (2008). Strengthening glulam beams with prestressed multilayer FRP carbon laminates In: Final Conference COST E34 Bonding of Timber (2008). Sopron, Hungary. 06.-07.05.2008.

Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.

Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA

Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari

Lehmann, Martin (2008). Ductile adhesive interface for glulam In: Holzbau Forschung und Praxis (2008). Stuttgart, Germany. 05.-06.03.2008.

Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric (2008). Strengthening of timber structures using pre-stressed carbon fibre lamellas In: MEDACHS Conference (2008). Lisbon, Portugal. 20.-23.01.2008.

Navi, Parviz; Pichelin, Frédéric (2008). Difficulties of the modelling of wood forming processes In: Dresdner Werkzeugmaschinen-Fachseminar (2008). Dresden, Germany. 11.-12.12.2008.

Properzi, Milena; Pattis, Reto; Pichelin, Frédéric (2008). Wood ash as a resource for the production of innovative composite materials In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 2.-5.06.2008.

Zürcher, Ernst; Quartey, G.A (2008). Durability investigations of lesser-known Ghanaian wood species In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.

Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.

Zürcher, Ernst; Rogenmoser, C. (2008). Exploring biodiversity at the wood level – Timber identification and structure-properties relationships In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.

Hurst, Andreas (2008). Holzhausbau in anderen Klimaregionen In: 40. Fortbildungskurs der Schweizerische Arbeitsgemeinschaft für Holzforschung (pp. 255-264). Zürich: SAH

2007

Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9

Volkmer, Thomas; Landmesser, H. (2007). Pilze auf Holzfassaden Berner Fachhochschule Architektur, Holz und Bau

Noël, Marion (2007). Innovative lactic acid biopolymer / wood based composite material elaboration (Dissertation, Université Henri Poincaré - Nancy I)

Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757

Brunner, Maurice Yaw; Engels, Isabel (2007). The search for an adhesive to grant glulam ductile behaviour In: SEMC International Conference. 10-12 Sep 2007.

Ganne-Chédeville, Christelle; Pichelin, Frédéric (2007). Holzschweißen : Holz verbinden, schnell und ohne Leim Holz-Zentralblatt(40), pp. 1109-1110.

Lehmann, Martin; Clénin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Baublatt : aktuelle Informationen für die Schweizer Baubranche(41), pp. 28-30. Docu Media Schweiz

Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus

Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.

Mayer, Ingo (2007). Biologische und chemische Untersuchungen über Holzinhaltsstoffe und deren Reaktionsmechanismen bei der wärmetechnischen Behandlung und Wasseraufbereitung in der Furnierindustrie (Dissertation, Universität Hamburg)

Volkmer, Thomas (2007). Schimmelpilze auf beschichteten Holzfassaden: chemische und physikalische Einflussfaktoren (Dissertation, Albert-Ludwigs-Universität Freiburg)

2006

Boonstra, M.; Pizzi, A.; Ganne-Chédeville, Christelle; Properzi, M.; Leban, J. M.; Pichelin, Frédéric (2006). Vibration welding of heat-treated wood Journal of Adhesion Science and Technology, 20(4), pp. 359-369. 10.1163/156856106776381758

Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068

Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services

Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.

Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679

Brunner, Maurice Yaw (2006). On the increasing importance of tensile loading perpendicular to the grain in some new timber products In: World Conference on Timber Engineering. Portland, USA. 06.-10.08.2006.

Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.

Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.

Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4

Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.

Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST

JP (2006). Unfolding anchor (JP2006153277 (A))

2005

Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037

Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6

Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444

Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305

Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8

Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004

Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society

Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.

Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.

Wieland, Stefanie; Properzi, Milena; Pichelin, Frédéric; Gfeller, Balz (2005). Einsatz des linearen Vibrationsschweissens in der Holzindustrie In: Frauenhofer WKI Workshop: Klebstoffe für Holzprodukte. Braunschweig, Germany. 10-11 Nov 2005.

Ed. Geistlich & Söhne AG (2005). Aus Holzlamellen aufgebautes Tragelement und Klebstoff für dieses (EP 1 586 430 (A1))

2004

Ammann AG (2004). Connecting element (EP 1 437 040 A1)

Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.

Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. De Gruyter 10.1515/HF.2004.007

Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310

Richter, Klaus; Lehmann, Martin; Properzi, Milena (2004). Long-term behaviour of pre-stressed timber-CFRP composites In: Enhancing bondline performance : proceedings of the final conference in COSTE 34 "Bonding of timber" (pp. 80-88). Lövér-Print Nyomdaipari

Brunner, Maurice Yaw; Schnueriger, M. (2004). Strengthening of timber beams with prestressed artificial fibers: development of a suitable adhesive technology In: International Symposium on Advanced Timber and Timber-composites Elements for Building (pp. 45-50). San Michele all'Andige, Italy: CNR-Ivalsa

Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa

2003

Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419

Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001

Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.

This list was generated on Tue Mar 19 03:50:40 2024 CET.
Provide Feedback