 | Up a level |
Mayer, Ingo (February 2020). Des animaux sains grâce aux tanins du bois suisse spirit biel/bienne : das Magazin der technischen Disziplinen der Berner Fachhochschule = le magazine des disciplines techniques de la Haute école spécialisée bernoise(1) Biel/Bienne: Berner Fachhochschule BFH, Departement Architektur, Holz und Bau, Departement Technik und Informatik
Näher, Thomas; Thömen, Heiko; Burgert, Ingo (2020). S-Win Innovation Roadmap 2030 - Strategische Ziele und Massnahmen für die Schweizerische Forst- und Holzwirtschaft Zürich: Swiss Wood Innovation Network S-Win
Franke, Steffen; Franke, Bettina (22 October 2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektpartner In: 51. Fortbildungskurs S-WIN: Hochleistungs werkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Lehmann, Martin (October 2019). Keilzinkung und Flächenverklebung von Buchenlamellen In: S-Win 51. Fortbildungkurs - Hochleistungswerkstoffe im Holzbau. S-Win
Müller, Andreas (1 September 2019). Zerstörungsfreie Prüfmethoden Wir Holzbauer, 6, pp. 34-37.
Müller, Andreas; Franke, Bettina (2019). Prüfung von geklebten Vollholzprodukten Wir Holzbauer, 5, pp. 26-29.
Stalder, Urs (2019). Einbruchhemmung bei Fenstern - was wichtig ist Sicherheitsforum, 6, pp. 10-16.
Müller, Andreas; Amstutz Hugi, Corinne (1 May 2019). Methoden der Zustandserfassung Wir Holzbauer, 4, pp. 30-33.
Rosset, Christian; Sciacca, Stéphane; Fiedler, Ulrich (2019). Exercices de martelage et suivi sylvicole sur martelage.sylvotheque.ch (MSC) Schweizerische Zeitschrift fur Forstwesen(170), pp. 98-101. https://doi.org/10.3188/szf.2019.0094
Müller, Andreas (1 March 2019). Zustandserfassung von Holzkonstruktionen Wir Holzbauer, 3, pp. 30-33.
Thömen, Heiko (2019). Rohstoffe effizienter einsetzen - das Modell dazu spirit biel/bienne, 1, pp. 14-15.
Thömen, Heiko; Job, Charles (2019). Hochflexible Beleuchtungslösungen in Möbeln spirit biel/bienne, 2, pp. 16-17.
Mayer, Ingo (2019). VOC-Emissionen aus mehrschichtigen Wand- und Deckenelementen in Holz-Rahmenbauweise HolzBauSpezial Bauphysik & Gebäudetechnik, 10, pp. 421-431. Forum Holzbau
Mayer, Ingo; Selbmann, Karl-Heinz (2019). 3D drucken mit Holz Spirit biel/bienne, 1, p. 16.
Mayer, Ingo; Schär, Tobias (2019). Natürlich – holzbasierte Schäume spirit biel/bienne, 2, p. 21.
Mayer, Ingo; Bianchi, Sauro (2019). Für den Fahrzeugleichtbau - biobasierte Werkstoffe spirit biel/bienne, 3, pp. 26-27.
Ganne-Chédeville, Christelle (2019). Observer et imiter la nature spirit biel/bienne, 2, p. 19.
Kolb, Hanspeter; Volkmer, Thomas (2019). Pour du bois résistant mieux au feu et à la lumière spirit biel/bienne, 2, pp. 8-9.
Canoine, Benoît (2019). Le bois densifié, un bois «exotique» local spirit biel/bienne, 2, p. 23.
Thömen, Heiko; Homerin, Benoît; Bernardy, Gregor; Steffen, Andreas (2019). Dichte von Holzwerkstoffen in Echtzeit vorhersagen Holz-Zentralblatt(21), pp. 446-447.
Niemz, Peter; Sandberg, Dick (2019). Wood modification in Switzerland In: Jones, Dennis; Sandberg, Dick; Goli, Giacomo; Todaro, Luigi (eds.) Wood Modification in Europe - a state-of-the-art about processes, products and applications (pp. 103-104). Florence, Italy: Firenze University Press
Franke, Steffen; Franke, Bettina (2019). Forschungsprojekt Verbindungen in Buchen-BSH: Motivation zum Projekt, Projektziele, Projektteam, Ergebnisse In: 51. Fortbildungskurs S-WIN: Laubholz für Hochleistungen im Bauwesen. Weinfelden, Suisse. 22.-23.10.2019.
Ehrhart, Thomas; Lehmann, Martin; Frangi, Andrea (2019). European beech ( Fagus sylvatica L .) glued laminated timber : Lamination strength grading , production and mechanical properties In: International Scientific Conference on Hardwood Processing, ISCHP 19 (pp. 252-267). TU Delft
Mayer, Ingo; Hinterleitner, Christina (2018). Décontaminer les biens culturels spirit biel/bienne, 1, pp. 18-19.
Mayer, Ingo (2018). Les fins limiers de la BFH au service d’un air ambiant sain spirit biel/bienne, 3, pp. 8-9.
Thömen, Heiko; Wirth, Filipp (2018). Le bien-être – grâce à la réalité virtuelle ? spirit biel/bienne, 3, p. 25.
Noël, Marion (2018). Des pistes vertes pour protéger le bois spirit biel/bienne, 3, pp. 14-15.
Mayer, Ingo; Bianchi, Sauro (2018). Les résidus de bois: une opportunité pour les réseaux régionaux de valeur ajoutée spirit biel/bienne, 2, pp. 20-21.
Ganne-Chédeville, Christelle (2017). Woodenboxspring - sommeil en harmonie avec la nature spirit biel/bienne, 1, pp. 8-9.
Frei, Reto (2017). Un pas en avant vers des matériaux renouvelables efficaces spirit biel/bienne, 1, pp. 16-17.
Thömen, Heiko (2017). Légèreté pour le mobilier spirit biel/bienne, 1, pp. 24-25.
Mayer, Ingo; Volkmer, Thomas (2017). Couleurs tendance grâce aux composés naturels du bois spirit biel/bienne, 2, pp. 14-15.
Volkmer, Thomas (2017). Le bois, résistant au feu et durable, grâce aux minéraux cristallisés spirit biel/bienne, 2, p. 26.
Niemz, Peter; Sonderegger, Walter (2017). Holzphysik München, Deutschland: Carl Hanser Verlag GmbH & Co. KG 10.3139/9783446445468
Pichelin, Frédéric (2016). «Cocoboard» panneaux biosourcés à base de fibres de coco spirit biel/bienne, 2, p. 22. BFH
Mayer, Ingo (2016). Polyvalent et durable – Le tanin issu des forêts suisses spirit biel/bienne, 2, pp. 24-25.
Mayer, Ingo (2016). Qualité de l’air intérieur: Matériaux sans émissions et inodores, question d’actualité spirit biel/bienne, 3, p. 12.
Volkmer, Thomas; Nelis, Thomas (2015). Wood 'n plasma spirit biel/bienne, 1, p. 23.
Strautmann, Jean; Noël, Marion; Volkmer, Thomas (October 2013). Surface qualification of weathered wood In: Joint COST FP0904 & FP1006 International Proceeding of the Workshop on characterization of modified wood in relation to wood bonding and coating performance. Rogla, Slovenia. 16-18 Oct 2013.
Schär, M.; Mayer, Ingo; Noël, Marion; von Arx, Urs; Felder, R.; Selbmann, K.-H. (September 2013). UV LED curing of clear varnish Advances in Printing and Media Technology, XL, pp. 139-146. Darmstadt, Germany: International association of research organizations for the information, Media and graphic arts industries
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard; Lehmann, Martin (2012). Measures for the maintenance of untreated wood facades In: World Conference on Timber Engineering (WCTE 2012). Auckland, New Zealand. 15-19.07.2012.
Rosenkranz, Andreas; Pichelin, Frédéric; Lehmann, Martin; Job, Charles; Tata Kimeng, H.; Mustapha, S.; Nduka, O.; Aghaegbusi Mgbemene, C. (September 2011). Nigerian agricultural waste products for the production of particleboard In: Italic 6 - Science & Technology of Biomass: Advances and Challenges. Viterbo, Italy. 5-8 Sep 2011.
Placencia, Maria Inés; Pizzi, Antonio; Pichelin, Frédéric (June 2011). Linear friction welding for wood, a parameters study for up-scaled assemblies In: CIMAD 11 – 1º Congresso Ibero-LatinoAmericano da Madeira na Construção. Coimbra, Portugal. 7-9 Jun 2011.
Zürcher, Ernst (June 2011). Dufthölzer - Bäume an deren Duft erkennen In: Schweizerische Beiträge zur Dendrologie. Zürich: Schweizerischen Dendrologischen Gesellschaft (SDG)
Noël, Marion; Fredon, Emmanuel; Mougel, Eric (2011). Biopolymer as reinforcement into natural matrices: a new route to bio-composite materials In: Attaf, B. (ed.) Advances in Composite Materials - Ecodesign and Analysis (pp. 87-102). Rijeka, Croatia: InTech 10.5772/15034
Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2011). Werterhaltung von unbehandelten Holzfassaden Schweizer Holzbau(6), pp. 24-29.
Ganne-Chédeville, Christelle; Mayer, Ingo; Ropp, Julien; Pichelin, Frédéric (2010). Thermal decontamination of railway sleepers for recycling. Changes in mechanical wood properties In: World Conference on Timber Engineering (WCTE 2010).
Mayer, Ingo; Ganne-Chédeville, Christelle; von Arx, Urs (2010). Thermal decontamination of railway sleepers for recycling. Removal of creosote oil In: World Conference on Timber Engineering (WCTE 2010).
Mayer, Ingo; von Arx, Urs (December 2009). Schön dauerhaft - dauerhaft schön Die Schreinerzeitung(49), pp. 10-12.
Mayer, Ingo (November 2009). Divergencias de color en Black Cherry aumentan Holz-Zentralblatt, Edición especial en lengua española por la „Fimma-Maderalia“, pp. 20-21.
Zürcher, Ernst; Conedera, M.; Giudici, F. (November 2009). Mondphasenkorrelierte Variationen im Trocknungsverhalten von Fichte (Picea abies Karst.) und Edelkastanie (Castanea sativa Mill.) Holzforschung Schweiz, 17.(2), pp. 15-19. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Zürcher, Ernst; Rogenmoser, Christian; Quartney, Gladys A. (November 2009). Wenig bekannte Holzarten Westafrikas Holzforschung Schweiz, 2, pp. 12-14. Schweizerische Arbeitsgemeinschaft für Holzforschung SAH
Rauscher, R.; Spang, F.; Lehmann, Martin; Vallée, Till (July 2009). Strength prediction of a joint composed of a pultruded FRP tube bonded to an FRP lamella In: 17th International Conference on Composite Materials. Edinburgh, UK. 27-29 Jul 2009.
Vallée, T.; Tannert, T.; Lehmann, Martin; Brunner, Maurice Yaw (July 2009). Probabilistic strength prediction of adhesively bonded joints composed of wooden adherends In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Kümmin, Peter; Niemz, Peter; Pichelin, Frédéric (6 February 2009). Einfluss der Holzfeuchte auf die Verklebungsgüte Holz-Zentralblatt(6), pp. 29-30. DRW-Verlag
Brunner, Maurice Yaw; Lehmann, Martin (2009). Frp-prestressed timber : losses in prestressing force due to elastic , creep and shrinkage deformations of the timber In: FRPRCS. Sydney, Australia. 13-15 Jul 2009.
Brunner, Maurice Yaw; Schnüriger, Marco; Roemer, Michael (2009). Holz-Beton-Platten mit Klebeverbund In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 705-710). Biberach: Institut für Holzbau Hochschule
Brunner, Maurice Yaw; Zürcher, Ernst (2009). Holzbrückenbau in Afrika: Neue Wege für Ghana Schweizer Holzbau, pp. 19-21.
Ganne-Chédeville, Christelle (2009). Schweißen von Holz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 1-6). Biberach, Deutschland: Institut für Holzbau, Hochschule Biberach
Lehmann, Martin (2009). Verstärkung von Holz mittels vorgespannten CFK-Lamellen In: Fortbildungskurs der SAH: Werkstoffkombinationen – ein Mehrwert für Holz (pp. 1-12). SAH
Lehmann, Martin; Vallée, T.; Tannert, T.; Brunner, Maurice Yaw (2009). Adhesively bonded joints composed of wooden load-bearing elements In: 12th International Conference on Fracture 2009. Ottawa, Canada. 12-17 Jul 2009.
Letsch, Bernhard (2009). Forschungsprojekt Fassaden Holzbaumarktschweiz(1), pp. 12-13. FS Media
Mayer, Ingo; Hunger, K.; Hubert, V.; Petrak, G.; Lehmann, E. (2009). Destructive and non-destructive methods for the evaluation of chlorinated pesticides concentration and emissions from wooden art objects In: COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”- International Conference on Wooden Cultural Heritage: Evaluation of Deterioration and Management of Change. Hamburg, Germany. 7-10 Oct 2009.
Rhême, Martin; Rehm, Klaus; Letsch, Bernhard; Oesch, Christof; McGeehan, Benjamin; Schindler, Liliane (2009). Influence of selected substrate characteristics on the powder coating of wood and timber materials In: Fischer, Kurt (ed.) Decor Surfaces Conference (pp. 161-168). Technical Conference Management
Volkmer, Thomas; Höltschi, Christoph (2009). Holzfassaden verändern ihre Farbe Applica : Die Zeitschrift für das Maler- und Gipsergewerbe, 5, pp. 12-16. Schweizerischer Maler- und Gipserunternehmer-Verband ; Schweizerischer Maler- und Gipsermeister-Verband
Brunner, Maurice Yaw; Engels, Isabel (2007). The search for an adhesive to grant glulam ductile behaviour In: SEMC International Conference. 10-12 Sep 2007.
Ganne-Chédeville, Christelle; Pichelin, Frédéric (2007). Holzschweißen : Holz verbinden, schnell und ohne Leim Holz-Zentralblatt(40), pp. 1109-1110.
Lehmann, Martin; Clénin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Baublatt : aktuelle Informationen für die Schweizer Baubranche(41), pp. 28-30. Docu Media Schweiz
Lehmann, Martin; Clenin, Reto; Richter, Klaus; Properzi, Milena (2007). Kohlefaserlamellen zur Verstärkung von Holzbalken Holzbau: Die neue Quadriga, 10, pp. 28-32. Kastner AG - das medienhaus
Stevanovic, T.; Resch, L.; Despres, A.; Ganne-Chédeville, Christelle; Pizzi, A.; Bocquet, J.-F.; Properzi, Milena; Pichelin, Frédéric (2007). Comparison of rotational and linear welding of different wood materials In: International Lignin Institute – ILI 8th Forum.
Properzi, M.; Pizzi, A.; Resch, L.; Bocquet, J.-F.; Pichelin, Frédéric; Ganne-Chédeville, Christelle (2006). Latest development in the field of wood welding In: 9th World Conference on Timber Engineering 2006, WCTE 2006 2 (pp. 1264-1271). Oregon State University Conference Services
Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric (2005). Wood bonding by vibrational and rotational friction welding In: Conference Wood Adhesives. San Diego, USA. 2005.
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Gfeller, Balz (2005). ILWVT - An innovative wood bonding technique In: Conference Wood Adhesives. 2005.
Wieland, Stefanie; Properzi, Milena; Pichelin, Frédéric; Gfeller, Balz (2005). Einsatz des linearen Vibrationsschweissens in der Holzindustrie In: Frauenhofer WKI Workshop: Klebstoffe für Holzprodukte. Braunschweig, Germany. 10-11 Nov 2005.
Zanuttini, Roberto; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Lehmann, Mario; Gfeller, Balz (2003). Encollage par soudage du bois massif In: 6èmes journées scientifiques de la forêt et du bois (pp. 45-49). A.R.BO.RLOR.
Bockel, Stefan; Harling, S.; Grönquist, P.; Niemz, Peter; Pichelin, Frédéric; Weiland, G.; Konnerth, Johannes (2020). Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength European Journal of Wood and Wood Products, 78(3), pp. 449-459. Springer 10.1007/s00107-020-01520-1
Shalbafan, Ali; Thömen, Heiko (2020). Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features Applied Sciences, 10(2), p. 593. MDPI 10.3390/app10020593
Khojasteh-Khosro, Saeed; Shalbafan, Ali; Thömen, Heiko (2020). Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products European Journal of Wood and Wood Products, 78(3), pp. 593-603. Springer 10.1007/s00107-020-01519-8
Franke, Steffen; Franke, Bettina; Müller, Andreas; Heubuch, Sebastian Pascal (4 December 2019). Stabdübelverbindungen und eingeklebte Gewindestangen in Buchen-BSH In: 25. Internationales Holzbau-Forum (IHF 2019). Congress Innsbruck Österreich. 4. - 6.12.2019.
Ozyhar, Tomasz; Depnering, Tobias; Ridgway, Cathy; Welker, Matthias; Schoelkopf, Joachim; Mayer, Ingo; Thömen, Heiko (2019). Utilization of inorganic mineral filler material as partial replacement for wood fiber in medium density fiberboard (MDF) and its effect on material properties European Journal of Wood and Wood Products, 78(1), pp. 75-84. Springer 10.1007/s00107-019-01480-1
Heubuch, Sebastian Pascal; Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Eingeklebte Gewindestangen in Buchen BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoffe im Holzbau. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Franke, Steffen; Franke, Bettina; Müller, Andreas (22 October 2019). Stabdübelverbindungen in Buchen-BSH In: 51. Fortbildungskurs S-WIN: Hochleistungswerkstoff. Hotel Thurgauerhof, Weinfelden. 22./23. Oktober 2019.
Ghazi Wakili, Karim; Stöckli, Thomas (4 September 2019). Slim building envelopes using vacuum glazing and high-performance insulation Journal of Physics: Conference Series, 1343, 012193. 10.1088/1742-6596/1343/1/012193
Kolb, Hanspeter; Beetschen, Mirko (2019). Vielfalt im Holzbau Die schönsten Seiten des Kantons Bern: Vol. 26. Bern: Stämpfli Verlag AG
Müller, Andreas; Franke, Bettina (5 June 2019). Zustandserfassung - Einführung und Methodik In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Bettina; Schiere, Marcus Jacob; Franke, Steffen; Müller, Andreas (5 June 2019). Bewertung der Holzfeuchte und deren Auswirkungen In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Steffen; Franke, Bettina (5 June 2019). Technische Methoden der Zustandserfassung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Schiere, Marcus Jacob; Franke, Bettina; Scharmacher, Florian (5 June 2019). Leistungsfähigkeit der Klebefuge in Brettschichtholz In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Maeder, Fritz (5 June 2019). Überlegungen zur Ausschreibung In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Franke, Steffen; Schiere, Marcus Jacob; Franke, Bettina (5 June 2019). Einsatz der Pressverklebung - Forschungsergebnisse In: Zustandserfassung und Erhaltung von Holztragwerken, Workshop.
Geyer, Christoph; Wehle, Barbara; Müller, Andreas (5 April 2019). Monitoring of water contents and temperatures of historical Walls with interior Insulation in Switzerland In: International WTA - PRECOM³OS symposium. Leuven, Belgium.
Wehle, Barbara; Geyer, Christoph; Melian Hernandez, Amabel (12 March 2019). Schall- und Luftdichthe¡t von Fenstern in der Renovation In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 377-388). Biel: FORUM HOLZBAU
Geyer, Christoph; Wehle, Barbara; Melian Hernandez, Amabel (12 March 2019). Ein neues Verfahren zur Berechnung der dynamischen Wärmekapazität von Holzbalkendecken In: 10. HolzBauSpezial Bauphysik & Gebäudehülle (pp. 151-160). Biel: FORUM HOLZBAU
Clerc, Gaspard; Niemz, Peter; Brunner, Andreas J; Van de Kuilen, Jan-Willem G. (March 2019). Anwendung geführter Wellen aus der Überprüfung der Sensorkopplung für die Bestimmung von Prüfkörpereigenschaften und Schädigungsgrad In: 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen. Deutschen Gesellschaft für Zerstörungsfreie Prüfung
Franke, Bettina; Franke, Steffen; Schiere, Marcus Jacob; Müller, Andreas (2019). Quality assurance of timber structures Bern: Bern University of Applied Sciences
Geyer, Christoph; Müller, Andreas; Wehle, Barbara (22 January 2019). Feuchteschutz sanierter Bestandswände mit Innendämmung Vergleich von Prognoseberechnung und Messung der Feuchtegehalte und Temperaturprofile In: Kolloquium Erhaltung von Bauwerken. Ostfildern, Deutschland. 22.-23.01.2019.
Bachtiar, Erik V.; Konopka, Daniel; Schmidt, Benjamin; Niemz, Peter; Kaliske, Michael (2019). Hygro-mechanical analysis of wood-adhesive joints Engineering Structures, 193, pp. 258-270. Elsevier 10.1016/j.engstruct.2019.03.104
Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003
Grosse, Charlotte; Noël, Marion; Thévenon, Marie-France; Gérardin, Philippe (2019). Improvement of Modified Wood Properties with Addition of Chestnut Tannins in Lactic Acid-Based Treatments Journal of Wood Chemistry and Technology, 39(2), pp. 124-135. Taylor & Francis 10.1080/02773813.2018.1513035
Clerc, Gaspard; Brunner, Andreas J.; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; Van de Kuilen, Jan Willem G. (2019). Adhesive wood joints under quasi-static and cyclic fatigue fracture Mode II loads International Journal of Fatigue, 123, pp. 40-52. Elsevier 10.1016/j.ijfatigue.2019.02.008
Bockel, Stefan; Mayer, Ingo; Konnerth, Johannes; Harling, Steffen; Niemz, Peter; Swaboda, Christiane; Beyer, Mario; Bieri, N.; Weiland, Guntram; Pichelin, Frédéric (2019). The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems International Journal of Adhesion and Adhesives, 91, pp. 43-53. Elsevier 10.1016/j.ijadhadh.2019.03.001
Nedelkoska, Elena; Pichelin, Frédéric; Volkmer, Thomas; Noël, Marion; Canoine, Benoît (2019). Properties of selected wood coatings applied on THM- densified Norway spruce (Picea abies K.) In: 4th International Scientific conference WOOD TECHNOLOGY & PRODUCT DESIGN. Ohrid, North Macedonia. 4 -7 September 2019.
Wenderdel, Christoph; Krug, Detlef; Niemz, Peter (2019). Mechanical properties of single fibres and fibre bundles of fibre pulp made of Scots pine for the manufacture of MDF Holztechnologie, 60(5), pp. 5-11. IHD
Niemz, Peter; Clerc, Gaspard; Pichelin, Frédéric; Garbiel, Joseph; Amen, Carlos; Salzgeber, Dario; Strahm, Thomas (2019). Brettschichtholz aus Esche besser verkleben Holz-Zentralblatt, 145(Januar), p. 17. DRW-Verlag Weinbrenner Verwaltungs-GmbH
Lombardo, Tiziana; Wörle, Marie; Hubert, Vera; Hildbrand, Erwin; Hinterleitner, Christina; Mayer, Ingo; von Arx, Urs (2019). Influence of Process Parameters on Chlorinated Biocide Decontamination by li-CO 2 on Artificially Contaminated Model Materials Studies in Conservation, 65(2), pp. 65-76. Taylor & Francis 10.1080/00393630.2019.1641001
Wörle, Marie; Lombardo, Tiziana; Hubert, Vera; Hildbrand, Erwin; Mürau, Elke; Mayer, Ingo; Hinterleitner, Christina; von Arx, Urs; Moser, Hansruedi; Lehmann, Roland (2019). Decontamination of Biocide Treated Museum Objects of the Swiss National Museum’s Collection by Liquid CO 2 Technology Studies in Conservation, 65(2), pp. 77-85. Taylor & Francis 10.1080/00393630.2019.1662644
Piccand, Miguel; Bianchi, Sauro; Halaburt, Ellen Isabell; Mayer, Ingo (2019). Characterization of extractives from biomasses of the alpine forests and their antioxidative efficacy Industrial Crops and Products, 142, p. 111832. Elsevier 10.1016/j.indcrop.2019.111832
Bianchi, Sauro; Zikeli, Florian; Vinciguerra, Vittorio; Kroslakova, Ivana; Mayer, Ingo; Pichelin, Frédéric; Matteucci, Giorgio (2018). Characterization of Pinus nigra var. laricio Maire bark extracts at the analytical and pilot scale Holzforschung, 73(4), pp. 353-361. De Gruyter 10.1515/hf-2018-0105
Bockel, S.; Mayer, Ingo; Konnerth, J.; Niemz, Peter; Swaboda, C.; Beyer, M.; Harling, S.; Weiland, G.; Bieri, N.; Pichelin, Frédéric (2018). Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding The Journal of Adhesion, 94(10), pp. 829-845. Taylor & Francis 10.1080/00218464.2017.1389279
Niemz, Peter (2017). Zur Orthotropie der physikalisch-mechanischen Eigenschaften von Fichtenholz Annals of Warsaw University of Life Sciences - SGGW Forestry and Wood Technology, 99, pp. 174-183.
Sanabria, Sergio J.; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp (2015). Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing Ultrasonics, 63, pp. 65-85. Elsevier B.V. 10.1016/j.ultras.2015.06.013
Sonderegger, Walter; Kranitz, Katalin; Bues, Claus-Thomas; Niemz, Peter (2015). Aging effects on physical and mechanical properties of spruce, fir and oak wood Journal of Cultural Heritage, 16(6), pp. 883-889. Elsevier Masson SAS 10.1016/j.culher.2015.02.002
Wang, Xiaodong; Hagman, Olle; Sundqvist, Bror; Ormarsson, Sigurdur; Wan, Hui; Niemz, Peter (2015). Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives European Journal of Wood and Wood Products, 73(2), pp. 225-233. Springer 10.1007/s00107-015-0882-4
Gariglio, Federico; Schnider, Thomas; Niemz, Peter; Ghazi Wakili, Karim; Brombacher, Volker (2015). Experimentelle und numerische Untersuchung des hygrothermischen Verhaltens von Flachdachelementen mit Hohlkastensystem Bauphysik, 37(1), pp. 17-30. 10.1002/bapi.201510002
Sanabria, S. J.; Lanvermann, C.; Michel, F.; Mannes, D.; Niemz, Peter (2015). Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials Experimental Mechanics, 55(2), pp. 403-415. 10.1007/s11340-014-9955-2
Abegg, Daniel; Frei, Reto; Cerato, Luca; Prasad Hari, Durga; Wang, Chao; Waser, Jerome; Adibekian, Alexander (2015). Proteome-Wide Profiling of Targets of Cysteine reactive Small Molecules by Using Ethynyl Benziodoxolone Reagents Angewandte Chemie International Edition, 54(37), pp. 10852-10857. 10.1002/anie.201505641
Ammann, Samuel; Niemz, Peter (2015). Specific fracture energy at glue joints in European beech wood International Journal of Adhesion and Adhesives, 60, pp. 47-53. Elsevier 10.1016/j.ijadhadh.2015.03.007
Baensch, Franziska; Sause, Markus G.R.; Brunner, Andreas J.; Niemz, Peter (2015). Damage evolution in wood – pattern recognition based on acoustic emission (AE) frequency spectra Holzforschung, 69(3), pp. 357-365. De Gruyter 10.1515/hf-2014-0072
Baensch, Franziska; Zauner, Michaela; Sanabria, Sergio J.; Sause, Markus G.R.; Pinzer, Bernd R.; Brunner, Andreas J.; Stampanoni, Marco; Niemz, Peter (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior Holzforschung, 69(8), pp. 1015-1025. De Gruyter 10.1515/hf-2014-0152
Güntekin, Ergün; Aydın, Tuğba Yılmaz; Niemz, Peter (2015). Prediction of compression properties in three orthotropic directions for some important Turkish wood species using ultrasound BioResources, 10(4), pp. 7252-7262.
Baumann, J. M.; Affolter, B.; von Arx, U.; Noël, Marion (2013). Alteration of urinary macromolecules by adsorption on surfaces, probably an important factor in urolithiasis Urolithiasis, 41(6), pp. 467-474. Springer Verlag 10.1007/s00240-013-0604-5
Benthien, Jan T.; Thömen, Heiko (2013). Effects of agglomeration and pressing process on the properties of flat pressed WPC panels Journal of Applied Polymer Science, 129(6), pp. 3710-3717. John Wiley & Sons, Ltd 10.1002/app.39155
Schmidt, Henrik; Benthien, Jan T.; Thömen, Heiko (2013). Processing and flexural properties of surface reinforced flat pressed WPC panels European Journal of Wood and Wood Products, 71(5), pp. 591-597. Springer 10.1007/s00107-013-0719-y
Volkmer, Thomas; Arietano, L.; Plummer, C.; Strautmann, J.; Noël, Marion (2013). Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification Polymer Degradation and Stability, 98(6), pp. 1118-1125. Elsevier 10.1016/j.polymdegradstab.2013.03.019
Sanabria, Sergio J.; Hilbers, Ulrich; Neuenschwander, Peter and Sennhauser; Niemz, Peter; Sennhauser, Urs; Thömen, Heiko; Wenker, Jan L. (2013). Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images Ultrasonics, 53(1), pp. 157-170. Elsevier 10.1016/j.ultras.2012.05.004
Vallée, Till; Tannert, Thomas; Ganne-Chédeville, Christelle (2012). Capacity prediction of welded timber joints Wood Science and Technology, 46(1-3), pp. 333-347. 10.1007/s00226-011-0404-4
Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz (2012). Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy Holzforschung, 66(2), pp. 1-8. De Gruyter 10.1515/HF.2011.148
Froidevaux, Julien; Volkmer, Thomas; Ganne-Chédeville, Christelle; Gril, Joseph; Navi, Parviz (2012). Viscoelastic behaviour of aged and non-aged spruce wood in the radial direction Wood Material Science and Engineering, 7(1), pp. 1-12. 10.1080/17480272.2011.629735
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Toumas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne (2012). XPS and the medium-dependent surface adaptation of cellulose in wood Surface and Interface Analysis, 44(8), pp. 899-903. Wiley 10.1002/sia.4839
Schnider, Thomas; Niemz, Peter; Steiger, Benjamin; von Arx, Urs (2011). Investigations on the failure of bond lines under long-term climatic stress Bauphysik, 33(1), pp. 27-32. John Wiley & Sons, Ltd 10.1002/bapi.201110003
Pizzi, A.; Mansouri, H. R.; Leban, J. M.; Delmotte, L.; Pichelin, Frédéric (2011). Enhancing the exterior performance of wood joined by linear and rotational welding Journal of Adhesion Science and Technology, 25(19), pp. 2717-2730. Taylor & Francis Group 10.1163/016942411X556088
Ayrilmis, Nadir; Benthien, Jan T.; Thömen, Heiko; White, Robert H. (2011). Properties of flat-pressed wood plastic composites containing fire retardants Journal of Applied Polymer Science, 122(5), pp. 3201-3210. John Wiley & Sons, Ltd 10.1002/app.34346
Krackler, Verena; Keunecke, Daniel; Niemz, Peter; Hurst, Andreas (2011). Possible fields of hardwood applications Wood Research, 56(1), pp. 125-136.
Negro, Francesco; Cremonini, Corrado; Zanuttini, Roberto; Properzi, Milena; Pichelin, Frédéric (2011). A new wood-based lightweight composite for boatbuilding Wood Research, 56(2), pp. 257-266.
Zürcher, Ernst (2011). Plants and the moon - Traditions and phenomena HerbalEGram, 8(4), pp. 1-14. American botanical council
Barbu, Marius; Romania, Braşov; Ludtke, Jan; Thömen, Heiko; Welling, Johannes (October 2010). New technology for the continuous production of wood-based lightweight panels In: Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-10). United Nations Economic Commission for European Timber Committee
Froidevaux, Julien; Volkmer, Thomas; Anheuser, Kilian; Navi, Parviz (October 2010). Viscoelasticity behavior of modern and aged wood In: COST Action IE0601, Izmir International Conference. Izmir. 20.-22.10.2010.
Carrillo-Parra, Artemio; Hapla, Frantisek; Mayer, Ingo; Koch, Gerald; Foroughbakhch, Rahim (2010). Differences in physical and mechanical wood properties of mesquite (Prosopis laevigata) in four locations in Northeast Mexico International Journal of Agriculture, Environment and Biotechnology : IJAEB, 3(2), pp. 225-234.
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2010). Properties and set-recovery of surface densified Norway spruce and European beech Wood Science and Technology, 44(4), pp. 679-691. Springer Nature 10.1007/s00226-009-0291-0
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhauser, Urs; Richter, Klaus; Conzett, Jürg (2010). A flexible adhesive layer to strengthen glulam beams Journal of Adhesion Science and Technology, 24(8-10), pp. 1665-1701. Taylor & Francis 10.1163/016942410X507759
Barbu, Marius C.; Irle, Mark Thömen, Heiko; Sernek, Milan (eds.) (2010). Wood-based panel technology : an introduction for specialists [Textbook] . London: Brunel University Press
Thömen, Heiko; Walther, Thomas (2010). Grundlegende Untersuchungen zur Herstellung und Struktur von Holzwerkstoffen [Textbook] . Biel/Bienne, Schweiz: Berner Fachhochschule Architektur, Holz und Bau
Properzi, Milena; Wieland, Stefanie; Pichelin, Frédéric; Pizzi, Antonio; Despres, A. (2010). Formaldehyde-free dimethoxyethanal-derived resins for wood-based panels Journal of Adhesion Science and Technology, 24(8-10), pp. 1787-1799. Taylor & Francis 10.1163/016942410X511097
Zürcher, Ernst; Schlaepfer, R.; Conedera, M.; Giudici, F. (2010). Looking for differences in wood properties as a function of the felling date: lunar phase-correlated variations in the drying behavior of Norway Spruce (Picea abies Karst.) and Sweet Chestnut (Castanea sativa Mill.) Trees, 24(1), pp. 31-41. Springer 10.1007/s00468-009-0376-2
Ganne-Chédeville, Christelle; Volkmer, Thomas; Letsch, Bernhard (2010). Nachhaltige Reinigung von unbehandelten Holzfassaden – Ergebnisse aus laufenden Forschungsprojekten In: 42. SAH Fortbildungskurs. SAH
Lehmann, Martin; Brunner, Maurice Yaw; Kraft, Sebastian (2010). Higher load bearing capabilities with elastic glue lines for glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Brunner, Maurice Yaw; Lehmann, Martin; Kraft, Sebastian; Fankhause, Urs; Richter, Klaus (2010). Super glulam: A flexible adhesive layer boosts the bending resit ance of glulam In: 11th World Conference on Timber Engineering 2010, WCTE 2010.
Letsch, Bernhard; Volkmer, Thomas; Ganne-Chédeville, Christelle (2010). Reinigung von unbehandelten Holzfassaden Holzbaumarktschweiz : Fachmagazin für Holzbau, Architektur, Innenausbau, Produktion, 5, pp. 12-14.
Mayer, Ingo (2010). Ist die Luft rein? – Emissionen aus lackierten Oberflächen in die Innenraumluft In: InteriorDays. Biel/Bienne, Switzerland. 16.-17.09.2010.
Mayer, Ingo; Ganne-Chédeville, Christelle; Pichelin, Frédéric; von Arx, Urs; Hunger, K.; Koch, G.; Lehmann, E. (2010). Thermal treatment of beechwood railway sleepers for recycling. Changes in wood microstructure and mechanical properties In: COST Action FP0802 Workshop. Hamburg, Germany. 5.-8.10.2010.
Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric (2010). Properties and chemical changes of surface densified wood In: 11th World Conference on Timber Engineering 2010, WCTE 2010. Riva del Garda, Italy. 20.-24.06.2010.
Rhême, Martin; Ganne-Chédeville, Christelle; Navi, Parviz (2010). Soudage du bois : Avancées technologiques et futurs challenges In: Matériaux 2010. Nantes, France. 18.-22.10.2010.
Thömen, Heiko; Gonin, Marc-André (2010). European master programs in wood science and technology In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee (pp. 1-7). United Nations Economic Commission for Europe – Timber Committee
Hubert, Vera; Hildbrand, Erwin; Hunger, Katja; Lehmann, Eberhard; Mayer, Ingo; Centre, Collections; Museum, Swiss National (2010). COST IE0601 : Evaluation of two methods for the decontamination of pesticide contaminated wooden museum objects : An analytical approach In: Proceedings of the 4th International Conference of COST Action IE0601 “Wood Science for Conservation of Cultural Heritage”. Izmir, Turkey. 20.-22.10.2010.
Zürcher, Ernst (2010). Holzgeruch – eine unbeachtete, jedoch wirksame Eigenschaft Bündner Wald, 6, pp. 69-74. Gasser
Zürcher, Ernst; Rogenmoser, Christian (2010). Considering reversible variations in wood properties : possible applications in the choice of the tree-felling date ? In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.
Zürcher, Ernst; Schlaepfer, R.; Giudici, F. (2010). Lunar phases and wood properties. A field experiment on the effect of the tree felling date Sherwood : foreste ed alberi oggi, 163, pp. 13-17. Compagnia delle Foreste
Shalbafan, Ali; Luedtke, Jan; Welling, Johannes; Thömen, Heiko (2010). Multi-layered lightweight panels made by in-process foaming : comparison of core materials In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe – Timber Committee. Geneva, Switzerland. 11.-14.10.2010.
Gereke, Thomas; Schnider, Thomas; Hurst, Andreas; Niemz, Peter (2009). Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) Wood Science and Technology, 43(3-4), pp. 301-315. Springer Nature 10.1007/s00226-008-0218-1
Donzé, Marc; Brunner, Maurice Yaw (2009). Elastisch nachgiebige Klebefuge für Brettschichtholz In: Zukunft Holz – Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen und Evaluierung künftiger Entwicklungspotential (pp. 819-824). Biberach, Deutschland: Institut für Holzbau Hochschule Biberach
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2009). Surface modification of wood using friction Wood Science and Technology, 43(3-4), pp. 291-299. Springer Nature 10.1007/s00226-008-0227-0
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J M; Pizzi, A.; Pichelin, Frédéric (2008). Wood welding: Chemical and physical changes according to the welding time Journal of Adhesion Science and Technology, 22(Februa), pp. 761-773. Taylor & Francis Group 10.1163/156856108x295392
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688
Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Pichelin, Frédéric; Properzi, M.; Leban, J.-M. (2008). Wood Welded Connections: Energy Release Rate Measurement Journal of Adhesion Science and Technology, 22(2), pp. 169-179. 10.1163/156856108X306939
Delmotte, L.; Ganne-Chédeville, Christelle; Leban, J.M.; Pizzi, A.; Pichelin, Frédéric (2008). CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding Polymer Degradation and Stability, 93(2), pp. 406-412. Elsevier 10.1016/j.polymdegradstab.2007.11.020
Ganne-Chédeville, Christelle; Duchanois, Gilles; Pizzi, Antonio; Pichelin, Frédéric; Properzi, Milena; Leban, Jean-Michel (2008). Evaluation of the fracture toughness of wood welded connections: Measurement of the energy release rate by the method of experimental compliance In: World Conference on Timber Engineering (WCTE 2008).
Brunner, Maurice Yaw; Donzé, Marc (2008). GLULAM REBORN : A flexible adhesive interface to increase the bending resistance of glulam Applied Sciences, p. 2008.
Brunner, Maurice Yaw; Schnueriger, M.; Lehmann, Martin (2008). Strengthening glulam beams with prestressed multilayer FRP carbon laminates In: Final Conference COST E34 Bonding of Timber (2008). Sopron, Hungary. 06.-07.05.2008.
Brunner, Maurice Yaw; Zürcher, Ernst; Reinhard, Markus; Kankam, Charles K.; Appiah-Kubi, Emmanuel (2008). WAWABIMA - Outstanding mechanical properties of some lesser known timber species in Ghana. International Conference Research on lesser known timber species for bridge construction In: WAWABIMA. Accra, Ghana. 08.-11.09.2008.
Ganne-Chédeville, Christelle; Properzi, M.; Leban, J-M.; Pizzi, A.; Pichelin, Frédéric (2008). Interface microstructure development during wood welding In: Enhancing Bondline Performance – Final Conference of COST E34 Bonding of Timber 2002 (pp. 130-140). Csilla CSIHA
Lehmann, Martin; Brunner, Maurice Yaw; Schober, Kay Uwe; Rautenstrauch, Karl (2008). Testing and numerical simulation of FRP prestressed timber structures In: Enhancing bondline performance : Final Conference COST E34 Bonding of Timber (pp. 60-67). Sopron, Hungary: Lövér-Print Nyomdaipari
Lehmann, Martin (2008). Ductile adhesive interface for glulam In: Holzbau Forschung und Praxis (2008). Stuttgart, Germany. 05.-06.03.2008.
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric (2008). Strengthening of timber structures using pre-stressed carbon fibre lamellas In: MEDACHS Conference (2008). Lisbon, Portugal. 20.-23.01.2008.
Navi, Parviz; Pichelin, Frédéric (2008). Difficulties of the modelling of wood forming processes In: Dresdner Werkzeugmaschinen-Fachseminar (2008). Dresden, Germany. 11.-12.12.2008.
Properzi, Milena; Pattis, Reto; Pichelin, Frédéric (2008). Wood ash as a resource for the production of innovative composite materials In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 2.-5.06.2008.
Zürcher, Ernst; Quartey, G.A (2008). Durability investigations of lesser-known Ghanaian wood species In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark (2008). An innovative thermo densification method for wooden surfaces In: 10th World Conference on Timber Engineering 2008. Miyazaki, Japan. 02.-05.06.2008.
Zürcher, Ernst; Rogenmoser, C. (2008). Exploring biodiversity at the wood level – Timber identification and structure-properties relationships In: International Conference Research on lesser known timber species for bridge construction. Accra, Ghana. 08.-11.2008.
Hurst, Andreas (2008). Holzhausbau in anderen Klimaregionen In: 40. Fortbildungskurs der Schweizerische Arbeitsgemeinschaft für Holzforschung (pp. 255-264). Zürich: SAH
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2007). Edge and face linear vibration welding of wood panels Holz als Roh- und Werkstoff, 65(1), pp. 83-85. Springer 10.1007/s00107-006-0125-9
Wieland, S.; Pizzi, A.; Grigsby, W.; Warnes, J.; Pichelin, Frédéric (2007). Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins Journal of Applied Polymer Science, 104(4), pp. 2633-2636. Wiley 10.1002/app.24757
Volkmer, Thomas; Landmesser, H. (2007). Pilze auf Holzfassaden Berner Fachhochschule Architektur, Holz und Bau
Ganne-Chédeville, Christelle; Properzi, Milena; Pizzi, Antonio; Leban, Jean-Michel; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography Holzforschung, 60(4), pp. 434-438. De Gruyter 10.1515/HF.2006.068
Oteng-Amoako, Andrew; kwesi, Daniel; Andrew, Akwasi; Ossei Agyekumhene, Isaac; Zürcher, Ernst; Rogenmoser, Christian (2006). 100 tropical African timber trees from Ghana : tree description and wood identification with notes on distribution, ecology, silviculture, ethnobotany and wood uses [Edited Textbook] . Kumasi, Ghana: Forestry Research Institute of Ghana, KNUST
Pichelin, Frédéric; Nakatani, M.; Pizzi, A.; Wieland, S.; Despres, A.; Rigolet, S. (2006). Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives Forest Products Journal, 56(5), pp. 31-36.
Wieland, S.; Pizzi, A.; Hill, S.; Grigsby, W.; Pichelin, Frédéric (2006). The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation Journal of Applied Polymer Science, 100(2), pp. 1624-1632. Wiley 10.1002/app.23679
Brunner, Maurice Yaw (2006). On the increasing importance of tensile loading perpendicular to the grain in some new timber products In: World Conference on Timber Engineering. Portland, USA. 06.-10.08.2006.
Ganne-Chédeville, Christelle; Properzi, M.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2006). Parameters of wood welding: A study with infrared thermography In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Lehmann, Martin; Properzi, Milena; Pichelin, Frédéric; Triboulot, Pascal (2006). Pre-stressed FRP for the in-situ strengthening of timber structures In: 9th World Conference on Timber Engineering 2006, WCTE 2006. Portland, USA. 06.-10.08.2006.
Pizzi, Antonio; Leban, Jean-Michel; Ganne-Chédeville, Christelle; Properzi, Milena; Delmotte, Luc; Pichelin, Frédéric (2006). Le soudage du bois par friction Techniques de l’ingénieur, 4
Properzi, Milena; Ganne-Chédeville, Christelle; Tondi, Gianluca; Pichelin, Frédéric; Pizzi, Antonio (2006). Wood bonding by melting of non-toxic fillers using linear friction welding In: Ecowood International Conference on Environmentally-Compatible forest products. Oporto, Portugal. 20.-22.09.2006.
Properzi, Milena; Leban, Jean-Michel; Pizzi, Antonio; Wieland, Stephanie; Pichelin, Frédéric; Lehmann, Mario (2005). Influence of grain direction in vibrational wood welding Holzforschung, 59(1), pp. 23-27. De Gruyter 10.1515/HF.2005.004
Ganne-Chédeville, Christelle; Pizzi, A.; Thomas, A.; Leban, J. M.; Bocquet, J.-F.; Despres, A.; Mansouri, H. (2005). Parameter interactions in two-block welding and the wood nail concept in wood dowel welding Journal of Adhesion Science and Technology, 19(13-14), pp. 1157-1174. 10.1163/156856105774429037
Ganne-Chédeville, Christelle; Leban, J.M.; Properzi, M.; Pichelin, Frédéric; Pizzi, A. (2005). Temperature and density distribution in mechanical vibration wood welding Wood Science and Technology, 40(1), pp. 72-76. 10.1007/s00226-005-0037-6
Kanazawa, F.; Pizzi, A.; Properzi, M.; Delmotte, L.; Pichelin, Frédéric (2005). Parameters influencing wood-dowel welding by high-speed rotation Journal of Adhesion Science and Technology, 19(12), pp. 1025-1038. 10.1163/156856105774382444
Michel Leban, Jean; Pizzi, Antonio; Properzi, Milena; Pichelin, Frédéric; Gelhaye, Pierre; Rose, Christophe (2005). Wood welding: A challenging alternative to conventional wood gluing Scandinavian Journal of Forest Research, 20(6), pp. 534-538. Taylor & Francis 10.1080/02827580500432305
Pizzi, A.; Leban, J.-M.; Zanetti, M.; Pichelin, Frédéric; Wieland, S.; Properzi, M. (2005). Surface finishes by mechanically induced wood surface fusion Holz als Roh- und Werkstoff, 63(4), pp. 251-255. Springer Nature 10.1007/s00107-004-0569-8
Wieland, S.; Shi, Bozhang; Pizzi, A.; Properzi, M.; Stampanoni, M.; Abela, R.; Lu, Xiaoning; Pichelin, Frédéric (2005). Vibration welding of wood: X-ray tomography, additives, radical concentration Forest Products Journal, 55(1), pp. 84-87. Forest Products Society
Gfeller, B.; Lehmann, Martin; Properzi, M.; Pichelin, Frédéric; Zanetti, M.; Pizzi, A.; Delmotte, L. (2004). Interior wood joints by mechanical fusion welding of wood surfaces. Forest Products Journal, 54(7/8), 72 - 79.
Gfeller, Balz; Pizzi, Antonio; Zanetti, Michela; Properzi, Milena; Pichelin, Frédéric; Lehmann, Mario; Delmotte, Luc (2004). Solid wood joints by in situ welding of structural wood constituents Holzforschung, 58(1), pp. 45-52. 10.1515/HF.2004.007
Gfeller, B.; Properzi, M.; Zanetti, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2004). Wood bonding by mechanically-inducedin situ welding of polymeric structural wood constituents Journal of Applied Polymer Science, 92(1), pp. 243-251. Wiley 10.1002/app.13648
Leban, J.-M.; Pizzi, A.; Wieland, S.; Zanetti, M.; Properzi, M.; Pichelin, Frédéric (2004). X-ray microdensitometry analysis of vibration-welded wood Journal of Adhesion Science and Technology, 18(6), pp. 673-685. Taylor & Francis 10.1163/156856104839310
Richter, Klaus; Lehmann, Martin; Properzi, Milena (2004). Long-term behaviour of pre-stressed timber-CFRP composites In: Enhancing bondline performance : proceedings of the final conference in COSTE 34 "Bonding of timber" (pp. 80-88). Lövér-Print Nyomdaipari
Brunner, Maurice Yaw; Schnueriger, M. (2004). Strengthening of timber beams with prestressed artificial fibers: development of a suitable adhesive technology In: International Symposium on Advanced Timber and Timber-composites Elements for Building (pp. 45-50). San Michele all'Andige, Italy: CNR-Ivalsa
Properzi, Milena; Wieland, Stephanie; Pichelin, Frédéric; Gfeller, B. (2004). Welding of wood, a new challenge for the wood industry Proceedings of the International Symposium on Advanced Timber and Timber-Composite Elements for Buildings - Design, Construction, Manufacturing and Fire Safety, pp. 151-157. San Michele all’Andige: CNR-Ivalsa
Gfeller, B.; Zanetti, M.; Properzi, M.; Pizzi, A.; Pichelin, Frédéric; Lehmann, Martin; Delmotte, L. (2003). Wood bonding by vibrational welding Journal of Adhesion Science and Technology, 17(11), pp. 1573-1589. 10.1163/156856103769207419
Pizzi, Antonio; Properzi, Milena; Leban, Jean-Michel; Zanetti, Michela; Pichelin, Frédéric (2003). Mechanically-induced wood welding Maderas. Ciencia y tecnología, 5(2), pp. 101-106. SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT) 10.4067/S0718-221X2003000200001
