Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method

Ganne-Chédeville, Christelle; Duchanois, G.; Pizzi, A.; Leban, J.-M.; Pichelin, Frédéric (2008). Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method Journal of Adhesion Science and Technology, 22(12), pp. 1209-1221. 10.1163/156856108X323688

Text Ganne2008_PredictingThermalBehaviour_JAST.pdf - Published Version Restricted to registered users only Available under License Publisher holds Copyright. Download (618kB) | Request a copy

A numerical model to simulate the temperature behaviour of wood welding samples during the welding process was developed to understand the influence of material parameters on the welding temperature. A fi- nite element method and the CAST3M software were used to simulate and model the temperature changes during welding of beech wood. This model takes into account the different properties of the wood welded bondline, the geometry of the sample and the external conditions. The energy produced by the friction welding of the wood samples was determined from infrared thermography measurements for the welding process and inputted into the model. The comparison between the predicted and experimental results shows that the model is reliable. The applied pressure, the vibration, the extrusion of material and the chemical reactions, particularly exothermic reactions, are not taken into account in this model and thus probably ex- plain the differences existing between actual and simulated values. However, this numerical simulation gives information on the distribution of the temperature in the sample. The model predicted that the temperature difference between the centre and the side of the sample is not higher than 4◦C. This means that the border effects are negligible. The model was tested for different welding times. According to the model a heat flow about 70 kW/m2 is necessary at the welding line to ensure a satisfactory bonding for the chosen sample geometry. Welding of large wood pieces has also been simulated in this study.

Item Type:	Journal Article (Original Article)
Division/Institute:	School of Architecture, Wood and Civil Engineering School of Architecture, Wood and Civil Engineering > Institute for Materials and Wood Technology BFH Centres and strategic thematic fields > BFH Centre for Wood - Resource and Material School of Architecture, Wood and Civil Engineering > Institut for Building Materials and Biobased Products IBBM
Name:	Ganne-Chédeville, Christelle0000-0003-1000-6759; Duchanois, G.; Pizzi, A.; Leban, J.-M. and Pichelin, Frédéric0000-0003-3856-6707
Subjects:	Q Science > Q Science (General) T Technology > T Technology (General) T Technology > TA Engineering (General). Civil engineering (General) T Technology > TJ Mechanical engineering and machinery
ISSN:	0169-4243
Language:	English
Submitter:	Christelle Ganne-Chédeville
Date Deposited:	12 Feb 2020 15:23
Last Modified:	12 Jan 2021 21:45
Publisher DOI:	10.1163/156856108X323688
ARBOR DOI:	10.24451/arbor.9457
URI:	https://arbor.bfh.ch/id/eprint/9457