Influence of humidity and frequency on the energy dissipation in wood adhesives

Künniger, Tina; Clerc, Gaspard; Josset, Sébastien; Niemz, Peter; Pichelin, Frédéric; van de Kuilen, Jan-Willem G. (2019). Influence of humidity and frequency on the energy dissipation in wood adhesives International Journal of Adhesion and Adhesives, 92, pp. 99-104. Elsevier 10.1016/j.ijadhadh.2019.05.003

[img] Text
Künniger et al. - 2019 - Influence of humidity and frequency on the energy dissipation in wood adhesives.pdf - Published Version
Restricted to registered users only
Available under License Publisher holds Copyright.

Download (878kB) | Request a copy

In this paper, the frequency dependent energy dissipation of typical wood adhesive under cyclic stress was studied on film adhesive samples. Three moisture-curing one component polyurethane (1C-PUR)adhesives with relative ductile behavior, one melamine formaldehyde (MF)and one phenol formaldehyde resorcinol (PRF)adhesives both with a more brittle behavior were prepared to study the viscoelastic properties at different relative air humidities (RH). Dynamic Mechanical Analysis (DMA)in tensile mode was used to determine loss modulus, storage modulus and loss factor Tan Delta on free standing adhesive films. It has been shown that 1C-PUR adhesives dissipate proportional more of the stored energy than MF and PRF adhesives. Humidity increased the dissipative processes in all PUR adhesives, especially in the polyamide fiber filled adhesive. PRF adhesive is less influenced by humidity. While for all other tested adhesives the dissipative processes generally increased with higher humidity, humidity decreased the damping of the investigated MF adhesive. The influence of the frequency on the energy dissipation is low for all tested adhesives in the investigated frequency range. Further fatigue tests with glued wood samples are needed to confirm the results observed on the free standing adhesive films.

Item Type:

Journal Article (Original Article)

Division/Institute:

School of Architecture, Wood and Civil Engineering
School of Architecture, Wood and Civil Engineering > Institute for Materials and Wood Technology
BFH Centres and strategic thematic fields > BFH Centre for Wood - Resource and Material

Name:

Künniger, Tina;
Clerc, Gaspard;
Josset, Sébastien;
Niemz, Peter;
Pichelin, Frédéric0000-0003-3856-6707 and
van de Kuilen, Jan-Willem G.

Subjects:

Q Science > Q Science (General)
Q Science > QC Physics
Q Science > QD Chemistry
T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TH Building construction
T Technology > TP Chemical technology

ISSN:

01437496

Publisher:

Elsevier

Language:

English

Submitter:

Frédéric Pichelin

Date Deposited:

01 Nov 2019 11:42

Last Modified:

04 Nov 2022 11:58

Publisher DOI:

10.1016/j.ijadhadh.2019.05.003

ARBOR DOI:

10.24451/arbor.8412

URI:

https://arbor.bfh.ch/id/eprint/8412

Actions (login required)

View Item View Item
Provide Feedback